Wi-Fi 7 outdoors: introducing the all-weather WOP-50L access point

19 November 2026

Russian outdoors

The story of Eltex corporate Wi-Fi 7 began with the WEP-550K indoor access point. The office product line later expanded with the WEP-500K and WEP-50L models for different usage scenarios and workload profiles.

“From the very start, we saw Wi-Fi 7 in Russia as more than just an upgrade to office wireless. It was only natural that our next step was to go outdoors and bring the new standard to open-air environments. Now our customers have a clear and complete idea of how they can extend the capabilities of an outdoor network.”

Aleksandr Smith, Product Manager of the Wireless department at Eltex

Wi-Fi 7 for outdoor networks

Compared with the WOP-30L Wi-Fi 6 access point, the new model delivers a 20% higher maximum data rate in the 2.4 GHz band: from 574 to 688 Mbps, and 2.4 times higher in the 5 GHz band: from 1,201 to 2,882 Mbps. WOP-50L supports 4096-QAM modulation and channel widths of up to 160 MHz, versus 80 MHz on the previous model. With Wi-Fi 7, an outdoor network built on WOP-50L is better equipped for high-resolution video streaming, large file transfers, and other tasks involving heavy traffic.

WOP-50L connects to the wired network via a 2.5G Ethernet port, which also delivers PoE+ power. The second Ethernet port supports speeds of up to 1 Gbps and can be used to connect a nearby wired device, such as a separately powered surveillance camera.

Actual throughput depends on interference conditions, network load, and client device capabilities.

Wi-Fi 7 includes MLO (Multi-Link Operation), which allows a client to use several radio links within a single connection. This improves transmission stability and reduces latency when streaming video and using corporate applications. WOP-50L supports MLO in the 2.4 and 5 GHz bands.

MU-MIMO 2×2 and OFDMA ensure efficient use of the available wireless capacity. A single WOP-50L supports up to 119 concurrent connections*. Seamless roaming is provided by the IEEE 802.11k/r/v standards.

Upgrade at your own pace

Moving to Wi-Fi 7 does not require replacing all equipment at once. The network can be upgraded gradually, starting with coverage expansion or upgrading locations where the existing network can no longer support demanding applications. The infrastructure will remain stable throughout: WOP-50L is fully compatible with previous-generation Wi-Fi devices, while the advantages and speed of the Wi-Fi 7 standard will become available as compatible clients appear.

Built to work in frost and heat

WOP-50L is designed for year-round operation at temperatures from −45 °C to +65 °C. The IP55-rated enclosure protects the device against dust and precipitation.

The coverage configuration can be tailored to specific requirements of each site. WOP-50L has four SMA connectors for external antennas: omnidirectional antennas create a uniform coverage area around the access point, while sector antennas direct the signal to specific parts of the site. The compact mount allows the device to be installed on a wall or a pole, and PoE+ power eliminates the need for separate power lines.

Wireless network management

WOP-50L integrates into the network infrastructure through the Eltex controller ecosystem, which includes the hardware WLC series, the vWLC virtual controllers, and the SoftWLC software controller. They provide centralized management of the entire device fleet, RF environment monitoring, seamless roaming configuration, and rapid software updates from a single interface.

WOP-50L security is based on WPA2 and WPA3 (Personal/Enterprise) and RADIUS. The NAICE system helps efficiently manage access to the entire infrastructure, including the wireless network. It provides in-depth security event auditing, real-time user privilege control, and control over connected devices.

 

New Wi-Fi 7 access points require matching wired infrastructure. Eltex offers an extensive range of multi-gigabit access switches with 2.5G and 10G ports and PoE+/PoE++ support. Learn more

The outdoor Wi-Fi 7 product line continues to grow: it will soon be joined by the upper-tier WOP-500KS with extended radio capabilities. We will cover its specifications and use cases in a separate announcement.

Order information

We will help select the right WOP-50L configuration for your project and provide details on equipment availability and delivery schedules.


* Software version 3.2.0 will increase the number of supported connections to 240 per radio interface (2.4/5 GHz) – 480 in total.

Leave your contacts, if you are interested
in the solution

0 products to compare
Show more
Compare