Firmware update for Wi-Fi access points WEP-500K and WEP-550K. Version 1.4.2

Version: 1.4.2

The firmware and detailed description of the product capabilities are available in the Downloads or on the product page.

• Support for specifying multiple controller addresses via DHCP Option 43 or device configuration (WLC >= 1.39.0)
• Support for DHCP Option 82 (DHCP relay agent information option) (WLC >= 1.39.0 for 2.4/5 GHz, WLC >= 1.39.2 for all bands)
• Traffic shapers on VAPs for unicast, broadcast, and multicast traffic (WLC >= 1.39.0; 2.4/5 GHz only)
• Traffic prioritization based on IEEE 802.1p and DSCP
• GRE/Local Switching mode support for MLO groups (WLC >= 1.39.2)
• VLAN ID support for MLO groups (WLC >= 1.39.2)
• Additional monitoring parameters for MLO clients (CLI only)
• WIDS functionality (configuration available via WLC >=1.42.0)
• Passive broadcast scanning supported (WLC >= 1.42.0)
• Support for the WEP-500K has been added.

• "4-way handshake timeout" error in the 6 GHz band
• Issue during IEEE 802.11r roaming to WEP/WOP-20/200/30L and WEP-3ax
• Portal authentication issue for some BE clients when using PreAuth ACL
• Authorization error with NAICE portal
• Radius accounting enhancements
• Configuration application time optimization
• Issue with bandwidth changes with Airtune in the 5 and 6 GHz bands.
• Client association and roaming (802.11r) issue on VAPs with WPA3-Personal and WPA2/WPA3-Personal encryption modes
• Incorrect traffic counters on network interfaces