Motion sensor SZ-PIR
Mass production
Infrared detector.
SZ-PIR device is a motion sensor. When the infrared detector is triggered, a LED begins to flash in a detection zone. When people or animals move within a detection zone, the detector sends messages to the main “Eltex-SC” controller.
The module can operate in any “Eltex-SC” network with certified devices of any other producers.
SZ-PIR device is a motion sensor. When the infrared detector is triggered, a LED begins to flash in a detection zone. When people or animals move within a detection zone, the detector sends messages to the main “Eltex-SC” controller.
The module can operate in any “Eltex-SC” network with certified devices of any other producers.
- Signal frequency 869 MHz
- Signal range up to 30 m (in a building)
Show all
Specifications
Documents and files
Warranty
- Signal frequency 869 MHz
- Signal range up to 30 m (in a building)
- Detection range under normal sensitivity at least 8 m
- Detection range under reduced sensitivity at least 6 m
- Range of intruder motion speed from 0.3 to 3.0 m/s
- Power battery lithium battery CR123A, 3V
- Current consumption excluding communication module 15 μА max
- Enclosure class IP40
- Dimensions 90×58×45 mm max
- Weight including power battery 100 g max
- Service life 10 years
- Operating temperature -10…+55 °С
- Operating humidity at +40 °С 93% max
- Maximum RF strength +6 dBm
Show all
Operational lifetime of the ELTEX equipment
In development
1
Pre-production
2
Mass production
3
Mass production is over
4
Sold out
5
Support is over
6
During the warranty period the manufacturer ensures technical support and free-of-charge repair at the Enterprise which is situated in Novosibirsk.
As part of the warranty service, technical support is provided on the first-in first-out principle.
The priority support packages of 8/5 and 27/7 types are subjects to additional charges.
News
