Data center switch MES5400-24

Mass production

Key features

High performance (up to 6.4 Тbps)
Non-blocking architecture
L3 switches
Stacking up to 8 devices
Power supply redundancy
Front-to-Back cooling
Dual ventilation system

MES5400-24 switches are high performance devices with 40GBASE-R / 100GBASE-R interfaces that can be used as aggregation or transport switches in carrier networks and as Top-of-Rack or End-of-Row switches for data centers.

The devices’ ports support operation at rates of 1 Gbps (SFP), 10 Gbps (SFP+), 40 Gbps (QSFP+) and 100 Gbps (QSFP28).

The non-blocking architecture guarantees lossless packet forwarding at wire speed with minimum and predictable delays for all types of traffic. The front-to-back cooling provides effective cooldown in modern data centers.

The redundant and hot-swappable fans and AC/DC power supplies along with advanced hardware monitoring func-tions provide high reliability and uninterrupted services.

The devices support EVPN/VXLAN technology to create networks with simple, high-performance and scalable data center architecture.

Show all

Interfaces

10/100/1000BASE-T (OOB) - 1
1000BASE-X (SFP)/10GBASE-R (SFP+) - 24
40GBASE-R (QSFP+)/100GBASE-R (QSFP28) - 6
USB 2.0 - 1
Console port RS-232 (RJ-45) - 1

Performance

Bandwidth - 1.68 Tbps
Throughput for 64 bytes¹ - 878.3 MPPS
Buffer memory - 12 MB
RAM (DDR4) - 8 GB
ROM (embedded uSSD) - 8 GB
MAC table - 65536
ARP table² - 32759
VLAN table - 4094
L2 Multicast groups - 4092
SQinQ rules - 1320 (ingress), 1320 (egress)
MAC ACL rules - 6144
IPv4/IPv6 ACL rules - 6144/3036
L3 IPv4 Unicast routes³ - 32669
L3 IPv6 Unicast routes³ - 8165
L3 IPv4 Multicast routes³ - 16324
L3 IPv6 Multicast routes³ - 4079
VRRP routers - 255
Maximum size of ECMP groups - 64
VRF number - 251 (including default VRF)
L3 interfaces - 2050
Maximum number of VXLAN - 4093
Link Aggregation Groups (LAG) - 128, up to 8 ports in one LAG
Quality of Service (QoS) - 8 egress queues per port
Jumbo frames - 10240 bytes
Stacking - up to 8 devices

Interface features

Head-of-line blocking (HOL) protection
Back Pressure
Auto MDI/MDIX
Jumbo Frames
Flow Control (IEEE 802.3X)
Port Mirroring

MAC table features

Independent learning in each VLAN
MAC Multicast Support
Configurable MAC address aging time
Static MAC Entries
MAC Flapping logging

VLAN features

Voice VLAN
IEEE 802.1Q
Q-in-Q
Selective Q-in-Q
GVRP

L2 Multicast functions

Multicast profiles
Static Multicast groups
IGMP Snooping v1,2,3
Port/host-based IGMP Snooping Fast Leave
IGMP authorization via RADIUS
MLD Snooping v1,2
IGMP Querier

L2 functions

STP (Spanning Tree Protocol, IEEE 802.1d)
RSTP (Rapid Spanning Tree Protocol, IEEE 802.1w)
MSTP (Multiple Spanning Tree Protocol, IEEE 802.1s)
Spanning Tree Fast Link option
STP Root Guard
BPDU Filtering
STP BPDU Guard
Looback Detection (LBD)
ERPS (G.8032v2)
PVSTP+
RPVSTP+

L3 functions

Static routing
Dynamic routing protocols RIP, OSPFv2, OSPFv3, BGP⁴, IS-IS
Address Resolution Protocol (ARP)
VRRP
PIM SM, PIM DM, IGMP Proxy, MSDP
BFD
IP Unnumbered
VRF lite

EVPN/VXLAN⁵

Support for L2VPN services
Support for L3VPN services

Link Aggregation functions

Link Aggregation Groups (LAG)
LACP
LAG Balancing Algorithm
Multi-Switch Link Aggregation Group (MLAG)

IPv6 support

IРv6 Host
Dual stack IРv6/IРv4

Service functions

Optical transceiver diagnostics
Green Ethernet

Security functions

DHCP Snooping
DHCP Option 82
IP Source Guard
Dynamic ARP Inspection
sFlow
MAC-based authentication, MAC address limitation, static MAC entries
Port-based authentication IEEE 802.1x
Guest VLAN
DoS attack prevention
Traffic segmentation
DHCP clients filtering
BPDU attack prevention
NetBIOS/NetBEUI filtering

Access Control Lists (ACL)

L2-L3-L4 ACL
Time-Based ACL
IРv6 ACL
ACL based on:
- Physical port number
- IEEE 802.1p
- VLAN ID
- EtherType
- DSCP
- Protocol type
- TCP/UDP port number

Management functions

Configuration and firmware download and upload via TFTP
SNMP
Command Line Interface (CLI)
Web interface
Syslog
SNTP (Simple Network Time Protocol)
Traceroute
LLDP (IEEE 802.1ab)
Access control – privilege levels
Management ACL
Management interface blocking
Local authentication
IP addresses filtering for SNMP
RADIUS/TACACS+ (Terminal Access Controller Access Control System) client
SSH server
Telnet server
SSL
Macrocommands
CLI command logging
System log
DHCP auto provisioning
DHCP Relay (Option 82)
DHCP Option 12
DHCP server
Debugging commands
CPU traffic limiting mechanisms
Password encryption
Password recovery
Ping (IPv4/IPv6)

Monitoring functions

Interface statistics
Remote monitoring RMON/SMON
Task- and traffic type-based CPU utilization monitoring
Temperature monitoring
TCAM monitoring
IPFIX

Quality of Service (QoS) and rate limiting

QoS statistics
Shaping, Policing
IEEE 802.1р Class of Service (CoS)
Broadcast Storm Control
Bandwidth management
Strict Priority/Weighted Round Robin (WRR) scheduling algorithms
Three marking colors
ACL-based CoS/DSCP metric assignment
ACL-based VLAN metric assignment
Setting the IEEE 802.1p priority for management VLAN
DSCP to CoS, CoS to DSCP remarking
ACL-based traffic classification

MIB

RFC 1065, 1066, 1155, 1156, 2578 MIB Structure
RFC 1212 Concise MIB Definitions
RFC 1213 MIB II
RFC 1215 MIB Traps Convention
RFC 1493, 4188 Bridge MIB
RFC 1157, 2571-2576 SNMP MIB
RFC 1901-1908, 3418, 3636, 1442, 2578 SNMPv2 MIB
RFC 271, 1757, 2819 RMON MIB
RFC 2465 IPv6 MIB
RFC 2466 ICMPv6 MIB
RFC 2737 Entity MIB
RFC 4293 IPv6 SNMP Mgmt Interface MIB
Private MIB
RFC 3289 DIFFSERV MIB
RFC 2021 RMONv2 MIB
RFC 1398, 1643, 1650, 2358, 2665, 3635 Ether-like MIB
RFC 2668 IEEE 802.3 MAU MIB
RFC 2674, 4363 IEEE 802.1p MIB
RFC 2233, 2863 IF MIB
RFC 2618 RADIUS Authentication Client MIB
RFC 4022 MIB for TCP
RFC 4113 MIB for UDP
RFC 3298 MIB for Diffserv
RFC 2620 RADIUS Accounting Client MIB
RFC 2925 Ping & Traceroute MIB
RFC 768 UDP
RFC 791 IP
RFC 792 ICMPv4
RFC 2463, 4443 ICMPv6
RFC 4884 Extended ICMP to support Multi-Part messages
RFC 793 TCP
RFC 2474, 3260 Definition of the Differentiated Services Field (DS Field) in the IPv4 and IPv6 headers
RFC 1321, 2284, 2865, 3580, 3748 Extensible Authentication Protocol (EAP)
RFC 2571-2574 SNMP
RFC 826 ARP

Physical parameters

Power supply	AC: 100–240 V, 50–60 Hz DC: 36–72 V Power supply options: one AC/DC power source two AC/DC hot-swappable power sources
Input current	0.5–1.7 A for AC 2–4 A for DC
Maximum power consumption	150 W
Heat dissipation	150 W
Dying Gasp support	no
Operating temperature	from 0 to +45 °С
Storage temperature	from -50 to +70 °С
Operating humidity	no more than 80 %
Cooling	Front-to-Back, 4 fans
Dimensions (W × H × D)	440 × 44 × 321 mm
Weight	6.36 kg

¹ Values are given for one-way transmission.
² For each host in the ARP table, an additional entry is created in switching table. The number of ARP with EVPN license installed for MES5400-24 is 30711 and for MES5400-48 is 129015
³ IPv4/IPv6 Unicast/Multicast routes share hardware resources.
⁴ BGP protocol support is provided under the license
⁵ EVPN support is provided under the license

Show all

Additional modules (doesn't included in basic package)
PM350-48/12	PM350-48/12 power module, 35-75V DC, 350W
РМ350-220/12	РМ350-220/12 power module, 176-264V AC, 350W

1 fiber	Part Number
SFP 1.25 GE module, 3 km, SM, 1 fiber, TX/RX 1310/1550 SC set, DDM	FH-SB3512CDS3 / FH-SB5312CDS3
SFP 1.25 GE module, 3 km, SM, 1 fiber, TX/RX 1310/1550 LC set, DDM	FH-SB3512CDL3 / FH-SB5312CDL3
SFP 1.25 GE module, 20 km, SM, 1 fiber, TX/RX 1310/1550 SC set, DDM	FH-SB3512CDS20 / FH-SB5312CDS20
SFP 1.25 GE module, 20 km, SM, 1 fiber, TX/RX 1310/1550 LC set, DDM	FH-SB3512CDL20 / FH-SB5312CDL20
SFP 1.25 GE module, 20 km, SM, 1 fiber, TX/RX 1310/1550 SC set, DDM, INDUSTRIAL	FH-SB3512IDS20 / FH-SB5312IDS20
SFP 1.25 GE module 40 km, SM, 1 fiber, TX/RX 1310/1550 LC set, DDM	FH-SB3512CDL40 / FH-SB5312CDL40
SFP 1.25 GE module 40 km, SM, 1 fiber, TX/RX 1310/1550 SC set, DDM	FH-SB3512CDS40 / FH-SB5312CDS40
SFP 1.25 GE module 80 km, SM, 1 fiber, TX/RX 1490/1550 LC set, DDM	FH-SB4512CDL80 / FH-SB5412CDL80
SFP 1.25 GE module 80 km, SM, 1 fiber, TX/RX 1490/1550 SC set, DDM	FH-SB4512CDS80 / FH-SB5412CDS80
SFP 1.25 GE module 120 km, SM, 1 fiber, TX/RX 1490/1550 LC set, DDM	FH-SB4512CDL120 / FH-SB5412CDL120
SFP 1.25 GE module 120 km, SM, 1 fiber, TX/RX 1490/1550 SC set, DDM	FH-SB4512CDS120 / FH-SB5412CDS120
SFP 1.25 GE module 160 km, SM, 1 fiber, TX/RX 1490/1550 LC set, DDM	FH-SB4512CDL160 / FH-SB5412CDL160
2 fibers
SFP 1.25 GE module 550 m, MM, 2 fibers, 850 nm, LC, DDM	FH-S8512CDL05
SFP 1.25 GE module 2 km, ММ, 2 fibers, 1310 nm, LC, DDM	FH-S3112CDL2
SFP 1.25 GE module 20 km, SМ, 2 fibers, 1310 nm, LC, DDM	FH-S3112CDL20
SFP 1.25 GE module 40 km, SМ, 2 fibers, 1310 nm, LC, DDM	FH-S3112CDL40
SFP 1.25 GE module 80 km, SМ, 2 fibers, 1550 nm, LC, DDM	FH-S5512CDL80
SFP 1.25 GE module 120 km, SМ, 2 fibers, 1550 nm, LC, DDM	FH-S5512CDL120
SFP 1.25 GE module 160 km, SМ, 2 fibers, 1550 nm, LC, DDM	FH-S5512CDL160
SFP+
1 fiber
SFP+ 10GE module 3 km, SM, 1 fiber, TX/RX 1290/1310 LC set, DDM	FH-SPB311TCDL3 / FH-SPB191TCDL3
SFP+ 10GE module 20 km, SM, 1 fiber, TX/RX 1330/1270 LC set, DDM	FH-SPB231TCDL20 / FH-SPB321TCDL20
SFP+ 10GE module 40 km, SM, 1 fiber, TX/RX 1330/1270 LC set, DDM	FH-SPB231TCDL40 / FH-SPB321TCDL40
SFP+ 10GE module 60 km, SM, 1 fiber, TX/RX 1330/1270 LC set, DDM	FH-SPB231TCDL60 / FH-SPB321TCDL60
SFP+ 10GE module 80 km, SM, 1 fiber, TX/RX 1490/1550 LC set, DDM	FH-SPB451TCDL80 / FH-SPB541TCDL80
SFP+ 10GE module 100 km, SM, 1 fiber, TX/RX 1490/1550 LC set, DDM	FH-SPB451TCDL100 / FH-SPB541TCDL100
2 fibers
SFP+ 10GE module, 0.3 km, MM, 2 fibers, 850 nm, LC, DDM	FH-SP851TCDL03
SFP+ 10GE module, 20 km, SM, 2 fibers, 1310 nm, LC, DDM	FH-SP311TCDL20
SFP+ 10GE module, 40 km, SM, 2 fibers, 1550 nm, LC, DDM	FH-SP551TCDL40
SFP+ 10GE module, 80 km, SM, 2 fibers, 1550 nm, LC, DDM	FH-SP551TCDL80
SFP+ 10GE module, 100 km, SM, 2 fibers, 1550 nm, LC, DDM	FH-SP551TCDL100
SFP/SFP+ transceivers with RJ-45 interface
SFP transceiver of 10/100/1000 BASE-T	FH-ST2
SFP+ transceiver of 10GBASE-Т	FH-10SFP-T
SFP+ Direct Attach Cable
SFP+ Direct attach cable, 10G, 1m	FH-DP1T30SS01
SFP+ Direct attach cable, 10G, 2m	FH-DP1T30SS02
SFP+ Direct attach cable, 10G, 3m	FH-DP1T30SS03
SFP+ Direct attach cable, 10G, 5m	FH-DP1T30SS05
QSFP Direct Attach Cable
QSFP Direct attach active cable, 1m	FH-DA4T26QQ01
QSFP Direct attach passive cable, 1m	FH-DP4T30QQ01
QSFP+ to 4хSFP+ Direct attach passive cable, 1m	FH-DP4T30QS01
QSFP+ to QSFP+ AOC Cable active 7m	FH-A40M2QQ07
QSFP
QSFP+ 40G ММ 100M	FH-QSFP4TCDM01
MPO CABLE patch cord UPC/UPC 2m Female (для QSFP+ 40G 100M)	NS-MPO12-MPO12-A3
QSFP+ 40G module, 10 km, SM, 1 fiber, 1270 nm/1290 nm/1310 nm/1330 nm, LC, DDM	FH-QSFP4TCDL10

Descriptions

Data Sheet

Software

Firmware version 6.6.4 (publication date: 14.08.2024)

MIB files (publication date: 14.08.2024)

Documentations

User Manual. Firmware version 6.6.4

Configuration and monitoring via SNMP 6.6.4

Downloads

Operational lifetime of the ELTEX equipment

Regardless of the operational lifetime stage, Eltex provides a 12 months warranty on all its telecommunication equipment.
During the warranty period the manufacturer ensures technical support and free-of-charge repair at the Enterprise which is situated in Novosibirsk.
As part of the warranty service, technical support is provided on the first-in first-out principle.
The priority support packages of 8/5 and 27/7 types are subjects to additional charges.

News

All news