Optical multiplexer ToPGATE-2STM1-2FG

Up to 126 E1 streams transmission via TDMoP that provides transparent connection of any E1 equipment without quality deterioration
Embedded full-featured L2 switch supports all the required standards for modern networks construction: traffic prioritization with 4 priority queues, VLAN
Building of combined networks with different bandwidth and technologies using 100M, 1G and 10G part of networks. Opportunity of bandwidth extension on Ethernet level or increasing of E1 streams quantity
2 interfaces of 1000Base-X for optic lines connection and support for RSTP (802.1w) for effective and fault-tolerant operation in modern distributed Ethernet networks with complicated ring topology with redundancy, e.g. ring with spurs, tree
Local (through the serial USB port) and remote management and diagnosis
Support for SNMP, Web, Telnet, local management console, port mirroring, opportunity to save and modify text configurations

TopGATE-2STM1-2FG multiplexer is dedicated for demultiplexing of structured and unstructured E1 streams (G.703, G.704) out of STM-1 stream (SDH) and for transmission of this data through packet data network (Ethernet) via TDMoP. Due to the embedded full-featured Gigabit Ethernet L2+ switch and 2 optic-fiber interfaces (up to 80 km link distance for a single fiber), there is an opportunity to built small transport networks without additional equipment.

Show all

STM1 interfaces

Quantity: 2 SFP
Standard: G.707
Synchronisation: inner, incoming Е1 stream synchronisation
Transmission delay: from 2.5 ms to 512 ms

Ethernet interfaces

Quantity: 4
2 Gigabit Ethernet (RJ-45)
2 Gigabit Ethernet (SFP)
Cooper interfaces standards: IEEE 802.3i 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3x Flow Control
Optical interfaces standards: IEEE 802.3u 100Base-FX, IEEE 802.3z 1000Base-X, IEEE 802.3x Flow Control

Parameters and capabilities

Bandwidth: 3.9 Gbps, 5.95 Mpps
MAC table: 1024 entries
Maximum frame size: 1632 bytes
IGMP Snooping
Redundancy: STP (802.1.d), RSTP (802.1w), Root guard
Port mirroring
DHCP
Static Mac
4 priority queues 802.1p
CoS based on: switch port, VLAN, DSCP, TOS, source/destination MAC address
Bandwidth management: step 64 kB
VLAN: IEEE 802.1Q standard, values range from 0 to 4095, Q-in-Q – double tagging;
MVR (Multicast VLAN Registration)

Management

Local management: 1 USB port, 1 RS-232
Management through IP network: Telnet CLI, menu,
Web interface, SNMP v1, v2
Soft update NMS
Equipment management, e.g. PBX management via AUX port

Dimensions

Dimensions (WxHxD, mm): 430х44х150, 19" formfactor, 1U, wall mounting
Weight 2 kg

Power supply

220 VAC, -48 VDC
Maximum power consumption 10 W

Show all

Descriptions

Data Sheet

Downloads

Operational lifetime of the ELTEX equipment

Regardless of the operational lifetime stage, Eltex provides a 12 months warranty on all its telecommunication equipment.
During the warranty period the manufacturer ensures technical support and free-of-charge repair at the Enterprise which is situated in Novosibirsk.
As part of the warranty service, technical support is provided on the first-in first-out principle.
The priority support packages of 8/5 and 27/7 types are subjects to additional charges.