Optical multiplexer TopGATE-1E1-1FG
- Compact size, 19" rack mounting
- Low-cost equipment and maintenance
- Transmission of single structured or unstructured E1 stream through data network without quality
- deterioration
- Unique algorithms of frequency recovery which provide stable operation on real networks
- Unified interface with ToPGATE series devices for combination of 100M, 1G and 10G networks based on cooper, optical and wireless technologies
- Local (via serial port Mini USB) and remote management and diagnosis
- Support for SNMP, Web, Telnet, SSH, RADIUS, TACACS+
- Opportunity to control devices through Eltex-EMS management system
Show all
Specifications
Documents and files
Warranty
E1 interfaces
- Quantity: 1 RJ-45
- Standards: G.703, G.704, G.706, G.823
- Interface: symmetric 120 Ohm, HDB3/AMI
- Synchronisation: inner, incoming Е1 stream synchronisation
- Link distance: 500 m
- TDMoP, SAToP, CESoPSN
- ransmission delay: 1-2000 ms
- 1+1 redundancy
- Quantity: 1 RJ-45, 1 SFP
- Type 10/100/1000 Mbps Auto MDI/MDI-X RJ-45
- Type IEEE 802.3 1000Base-X
- Support for IEEE 802.3, 802.3u, 10Base-T, 100Base-TX, 1000Base-TX standards
- Telnet CLI, menu
- SSH
- Web interface
- SNMP v1, v2c, v3
- RADIUS, TACACS+ authentication
- MAC table: 8192 entries
- Embedded switch bandwidth: up to 2 Gbps, 2.98 Mpps;
- Maximum frame size: 10240 bytes
- 4 priority queues 802.1p
- QoS based on: switch port, VLAN, DSCP, source/destination MAC address
- VLAN: IEEE 802.1Q standard, values range from 0 to 4095, Q-in-Q - double tagging
- IGMP Snooping
- MVR (Multicast VLAN Registration)
- Local traffic mirroring
- Support for NAT for E1 transmission
- PIRL – Port Ingress Rate Limit – bandwidth limiting for incoming traffic per ports
- FlowControl
- SAFilter – MAC address filtering
- Scheduling – frames output planning
- DyingGasp – message sending to syslog server in case of powerdown or reload
- Dimensions (WxHxD, mm): 82х26х85.5, 19" formfactor
- Weight 0.25 kg
- 220 VAC, 12 VDC (the convector ~220V into 12V is in the package)
- Maximum power consumption 6W
Show all
Operational lifetime of the ELTEX equipment
In development
1
Pre-production
2
Mass production
3
Mass production is over
4
Sold out
5
Support is over
6
During the warranty period the manufacturer ensures technical support and free-of-charge repair at the Enterprise which is situated in Novosibirsk.
As part of the warranty service, technical support is provided on the first-in first-out principle.
The priority support packages of 8/5 and 27/7 types are subjects to additional charges.
