Aggregation 10G/40G Switch MES5324

Personal order only

Key features

Bandwidth 800 Gbps
Non-blocking architecture
24x10G ports, 4x40G ports
L3 switch
Front-to-back cooling
Stacking up to 8 devices
Hot-swappable redundant power supplies
Hot-swappable fans

MES5324 switches are high performance devices with 10GBASE-R and 40GBASE-SR4/LR4 interfaces that can be used as aggregation or transport switches in carrier networks and as Top-of-Rack or End-of-Row switches for data centers.

The device’s ports support operation at rates of 1 Gbps (SFP), 10 Gbps (SFP+) and 40 Gbps (QSFP) that provides flexible using and ability of smooth transition to higher data rates. The non-blocking architecture guarantees lossless packet forwarding at wire speed with minimum and predictable delays for all types of traffic. The front-to-back cooling provides effective cooldown in modern data centers.

The redundant and hot-swappable fans and AC/DC power supplies with advanced hardware monitoring functions provide high reliability and uninterrupted services.

MES5324 switches comply with CE requirements.

Show all

Interfaces

24x(10G Base-X(SFP+)/1000Base-X (SFP)
4x40G Base-SR4/LR4 (QSFP)
1x10/100/1000Base-T (ООВ)
1х10/100/1000Base-T (Management in-band)
1xConsole port RS-232/RJ-45

Performance

Bandwidth - 800 Gbps
Throughput for 64 bytes¹ - 512.8 MPPS
Buffer memory - 4 MB
RAM (DDR3) - 4 GB
ROM (NAND) - 2 GB
MAC table - 64536
ARP table² - 7748
VLAN table - 4094
L2 Multicast groups - 4091
SQinQ rules -1982 (ingress/egress)
ACL rules - 1982
L3 IPv4 Unicastroutes³ - 7748
L3 IPv6 Unicastroutes³ - 1942
L3 IPv4 Multicast routes (IGMP Proxy, PIM)¹ - 3876
L3 IPv6 Multicast routes (IGMP Proxy, PIM)¹ - 1006
VRRP routers - 255
Maximum size of ECMP groups - 64
VRF - 16 (including default VRF)
L3 interfaces - 2048
Link Aggregation Groups (LAG) - 48
Quality of Service (QoS): 8 egress queues per port
Jumbo frames: 10240 bytes
Stacking - 8 devices

Interface functions

Head-of-line blocking (HOL) protection
Back Pressure
Auto MDI/MDIX
Jumbo frames
Flow Control (IEEE 802.3X)
Port Mirroring (SPAN, RSPAN)
Stacking

MAC addresses functions

Independent learning mode per VLAN
MAC Multicast Support
Configurable aging time of MAC addresses per VLAN
Static MAC Entries
MAC Flapping

VLAN functions

Voice VLAN
IEEE 802.1Q
Q-in-Q
Selective Q-in-Q
GVRP

L2 Multicast functions

Multicast profiles
Static Multicast groups
IGMP Snooping v1,2,3
Port/host-based IGMP Snooping Fast Leave
Pim-Snooping
IGMP proxy-report
IGMP authorization via RADIUS
MLD Snooping v1,2
IGMP Querier
MVR

L2 functions

STP (Spanning Tree Protocol, IEEE 802.1d)
RSTP (Rapid Spanning Tree Protocol, IEEE 802.1w)
MSTP (Multiple Spanning Tree Protocol, IEEE 802.1s)
STP Multiprocess
PVSTP+
RPVST+
Spanning Tree Fast Link option
STP Root Guard
STP Loop Guard
BPDU Filtering
STP BPDU Guard
Loopback Detection (LBD) per VLAN
ERPS (G.8032v2)
Flex-link
Private VLAN, Private VLAN Trunk
Layer 2 Protocol Tunneling (L2PT)

L3 functions

Static IP routes
RIPv2, OSPFv2, OSPFv3, IS-IS (IPv4 Unicast), BGP (IPv4 Unicast, IPv4 Multicast, IPv6 Unicast)
BFD (for BGP)
Address Resolution Protocol (ARP)
Proxy ARP
Policy-Based Routing (IPv4)
VRRP
PIM SM, PIM DM, IGMP Proxy, MSDP
ECMP Load Balancing
IP Unnumbered
GRE
VRF

Link Aggregation functions

Static LAG
Dynamic LAG (LACP)
LAG Balancing Algorithm
Multi-Switch Link Aggregation Group (MLAG)

Security functions

Protection against unauthorized DHCP servers (DHCP Snooping)
DHCP Option 82
IP Source Guard
Dynamic ARP Inspection
First Hop Security
sFlow
MAC-based authentication, Port Security, Static MAC entries
Port-based authentication IEEE 802.1x
Guest VLAN^¹
DoS attack prevention
Traffic segmentation
DHCP clients filtering
BPDU attack prevention
NetBIOS/NetBEUI
PPPoE Intermediate agent

IPv6 functions

IPv6 Host
Dual-stack

Service functions

Virtual Cable Testing (VCT)
Optical transceiver diagnostics
Green Ethernet

Quality of Service (QoS)

QoS statistics
Shaping, Policing
IEEE 802.1p Class of Service (CoS)
Storm Control for different types of traffic (broadcast, multicast, unknown unicast)
Bandwidth management
Scheduling algorithms: Strict Priority/Weighted Round Robin (WRR) algorithms
Three marking colors
ACL-based CoS/DSCP assignment
ACL-based VLAN assignment
Setting the IEEE 802.1p priority for management VLAN
DSCP to CoS/CoS to DSCP remarking
802.1p, DSCP mark assignment for IGMP

OAM

802.3ah Ethernet OAM
Dying Gasp
802.1ag Connectivity Fault Management (CFM)¹
802.3ah Unidirectional Link Detection

ACL (Access Control List)

L2-L3-L4 ACL
Time-Based ACL
IPv6 ACL
ACL based on:
- Physical port number
- IEEE 802.1p
- VLAN ID
- EtherType
- DSCP
- Protocol type
- TCP/UDP port number
- User Defined Bytes

Management functions

Download and upload of configuration file via TFTP/SCP
Redirecting the output of CLI commands to an arbitrary file on ROM
SNMP
Command Line Interface (CLI)
WEB interface
Syslog
SNTP (Simple Network Time Protocol)
NTP (Network Time Protocol)
Traceroute
LLDP (802.1ab) + LLDP MED
Processing traffic management with two 802.1Q headers
Authorization of entered commands using TACACS+ server
Access control – privilege levels
Management interface blocking
Local authentication
IP addresses filtering for SNMP
RADIUS and TACACS+ (Terminal Access Controller Access Control System) clients
Change of Authorization (CoA)
SSH server, Telnet server
SSH client, Telnet client
Remote start of commands via SSH
SSL
Macrocommands
CLI commands logging
System log
DHCP autoprovision
DHCP Relay (Option 82)
DHCP Option 12
DHCPv6 Relay, DHCPv6 LDRA (Option 18, 37)
PPPoE Circuit-ID tag
Debugging commands
Rate limit of traffic to CPU
Password encryption
Password recovery
Ping (IPv4/IPv6 support)
DNS server (Resolver)

Monitoring functions

Interface statistics
RMON/SMON
IP SLA
CPU utilization monitoring per task and per traffic type
RAM utilization monitoring
Temperature monitoring
TCAM utilization monitoring

MIB/IETF

RFC 1065, 1066, 1155, 1156, 2578 MIB Structure
RFC 1212 Concise MIB Definitions
RFC 1213 MIB II
RFC 1215 MIB Traps Convention
RFC 1493, 4188 Bridge MIB
RFC 1157, 2571-2576 SNMP MIB
RFC 1901-1908, 3418, 3636, 1442, 2578 SNMPv2 MIB
RFC 271,1757, 2819 RMON MIB
RFC 2465 IPv6 MIB
RFC 2466 ICMPv6 MIB
RFC 2737 Entity MIB
RFC 4293 IPv6 SNMP Mgmt Interface MIB
Private MIB
RFC 3289 DIFFSERV MIB
RFC 2021 RMONv2 MIB
RFC 1398, 1643, 1650, 2358, 2665, 3635 Ether-like MIB
RFC 2668 802.3 MAU MIB
RFC 2674, 4363 802.1p MIB
RFC 2233, 2863 IF MIB
RFC 2618 RADIUS Authentication Client MIB
RFC 4022 MIB for TCP
RFC 4113 MIB for UDP
RFC 2620 RADIUS Accounting Client MIB
RFC 2925 Ping & Traceroute MIB
RFC 768 UDP
RFC 791 IP
RFC 792 ICMPv4
RFC 2463, 4443 ICMPv6
RFC 4884 Extended ICMP for Multi-Part messages support
RFC 793 TCP
RFC 2474, 3260 DS field in the IPv4 and IPv6 header
RFC 1321, 2284, 2865, 3580, 3748 Extensible Authentication Protocol (EAP)
RFC 2571, RFC2572, RFC2573, RFC2574 SNMP
RFC 826 ARP
RFC 854 Telnet
IEC 61850

Physical parameters

Power:
- AC power: 100-240 V, 50-60 Hz
- DC power: 36-72V
Input current
- 0.85-0.35 A for AC
- 2.36-1.18 A for DC
Maximum power consumption - 107 W
Heat dissipation - 107 W
Operating temperature from 0 to +45° С
Storage temperature from -50 to+70°C
Operation humidity - no more than 80 %
Cooling - Front-to-Back, 4 fans
Form factor - 19'’, 1U
Dimensions (WxHxD) - 430x44x298 mm
Weight - 3.95 kg

¹The value is given for one-way transmission

²For each host in the ARP table, an entry is created in the routing table³IPv4/IPv6 Unicast/Multicast share hardware resources

Show all

Additional modules (doesn't included in basic package)
PM160-220/12	PM160-220/12 power module, 100-240 V AC, 160 W
РМ100-48/12	РМ100-48/12 power module, 36-72 V DC, 100 W

1 fiber	Part Number
SFP 1.25 GE module, 3 km, SM, 1 fiber, TX/RX 1310/1550 SC set, DDM	FH-SB3512CDS3 / FH-SB5312CDS3
SFP 1.25 GE module, 3 km, SM, 1 fiber, TX/RX 1310/1550 LC set, DDM	FH-SB3512CDL3 / FH-SB5312CDL3
SFP 1.25 GE module, 20 km, SM, 1 fiber, TX/RX 1310/1550 SC set, DDM	FH-SB3512CDS20 / FH-SB5312CDS20
SFP 1.25 GE module, 20 km, SM, 1 fiber, TX/RX 1310/1550 LC set, DDM	FH-SB3512CDL20 / FH-SB5312CDL20
SFP 1.25 GE module, 20 km, SM, 1 fiber, TX/RX 1310/1550 SC set, DDM, INDUSTRIAL	FH-SB3512IDS20 / FH-SB5312IDS20
SFP 1.25 GE module 40 km, SM, 1 fiber, TX/RX 1310/1550 LC set, DDM	FH-SB3512CDL40 / FH-SB5312CDL40
SFP 1.25 GE module 40 km, SM, 1 fiber, TX/RX 1310/1550 SC set, DDM	FH-SB3512CDS40 / FH-SB5312CDS40
SFP 1.25 GE module 80 km, SM, 1 fiber, TX/RX 1490/1550 LC set, DDM	FH-SB4512CDL80 / FH-SB5412CDL80
SFP 1.25 GE module 80 km, SM, 1 fiber, TX/RX 1490/1550 SC set, DDM	FH-SB4512CDS80 / FH-SB5412CDS80
SFP 1.25 GE module 120 km, SM, 1 fiber, TX/RX 1490/1550 LC set, DDM	FH-SB4512CDL120 / FH-SB5412CDL120
SFP 1.25 GE module 120 km, SM, 1 fiber, TX/RX 1490/1550 SC set, DDM	FH-SB4512CDS120 / FH-SB5412CDS120
SFP 1.25 GE module 160 km, SM, 1 fiber, TX/RX 1490/1550 LC set, DDM	FH-SB4512CDL160 / FH-SB5412CDL160
2 fibers
SFP 1.25 GE module 550 m, MM, 2 fibers, 850 nm, LC, DDM	FH-S8512CDL05
SFP 1.25 GE module 2 km, ММ, 2 fibers, 1310 nm, LC, DDM	FH-S3112CDL2
SFP 1.25 GE module 20 km, SМ, 2 fibers, 1310 nm, LC, DDM	FH-S3112CDL20
SFP 1.25 GE module 40 km, SМ, 2 fibers, 1310 nm, LC, DDM	FH-S3112CDL40
SFP 1.25 GE module 80 km, SМ, 2 fibers, 1550 nm, LC, DDM	FH-S5512CDL80
SFP 1.25 GE module 120 km, SМ, 2 fibers, 1550 nm, LC, DDM	FH-S5512CDL120
SFP 1.25 GE module 160 km, SМ, 2 fibers, 1550 nm, LC, DDM	FH-S5512CDL160
SFP+
1 fiber
SFP+ 10GE module 3 km, SM, 1 fiber, TX/RX 1290/1310 LC set, DDM	FH-SPB311TCDL3 / FH-SPB191TCDL3
SFP+ 10GE module 20 km, SM, 1 fiber, TX/RX 1330/1270 LC set, DDM	FH-SPB231TCDL20 / FH-SPB321TCDL20
SFP+ 10GE module 40 km, SM, 1 fiber, TX/RX 1330/1270 LC set, DDM	FH-SPB231TCDL40 / FH-SPB321TCDL40
SFP+ 10GE module 60 km, SM, 1 fiber, TX/RX 1330/1270 LC set, DDM	FH-SPB231TCDL60 / FH-SPB321TCDL60
SFP+ 10GE module 80 km, SM, 1 fiber, TX/RX 1490/1550 LC set, DDM	FH-SPB451TCDL80 / FH-SPB541TCDL80
SFP+ 10GE module 100 km, SM, 1 fiber, TX/RX 1490/1550 LC set, DDM	FH-SPB451TCDL100 / FH-SPB541TCDL100
2 fibers
SFP+ 10GE module, 0.3 km, MM, 2 fibers, 850 nm, LC, DDM	FH-SP851TCDL03
SFP+ 10GE module, 20 km, SM, 2 fibers, 1310 nm, LC, DDM	FH-SP311TCDL20
SFP+ 10GE module, 40 km, SM, 2 fibers, 1550 nm, LC, DDM	FH-SP551TCDL40
SFP+ 10GE module, 80 km, SM, 2 fibers, 1550 nm, LC, DDM	FH-SP551TCDL80
SFP+ 10GE module, 100 km, SM, 2 fibers, 1550 nm, LC, DDM	FH-SP551TCDL100
SFP/SFP+ transceivers with RJ-45 interface
SFP transceiver of 10/100/1000 BASE-T	FH-ST2
SFP+ transceiver of 10GBASE-Т	FH-10SFP-T
SFP+ Direct Attach Cable
SFP+ Direct attach cable, 10G, 1m	FH-DP1T30SS01
SFP+ Direct attach cable, 10G, 2m	FH-DP1T30SS02
SFP+ Direct attach cable, 10G, 3m	FH-DP1T30SS03
SFP+ Direct attach cable, 10G, 5m	FH-DP1T30SS05
QSFP Direct Attach Cable
QSFP Direct attach active cable, 1m	FH-DA4T26QQ01
QSFP Direct attach passive cable, 1m	FH-DP4T30QQ01
QSFP+ to 4хSFP+ Direct attach passive cable, 1m	FH-DP4T30QS01
QSFP+ to QSFP+ AOC Cable active 7m	FH-A40M2QQ07
QSFP
QSFP+ 40G ММ 100M	FH-QSFP4TCDM01
MPO CABLE patch cord UPC/UPC 2m Female (for QSFP+ 40G 100M)	NS-MPO12-MPO12-A3
QSFP+ 40G module, 10 km, SM, 1 fiber, 1270 nm/1290 nm/1310 nm/1330 nm, LC, DDM	FH-QSFP4TCDL10

Descriptions

Data Sheet

Software

MES23xx, MES33xx, MES35xx, MES5324_guide_for_firmware_version_update (publication date: 17.05.2021)

Firmware version 4.0.22 (publication date: 13.03.2024)

MIB files (publication date: 13.03.2024)

Documentations

User manual

Configuration and monitoring via SNMP

Downloads

Operational lifetime of the ELTEX equipment

Regardless of the operational lifetime stage, Eltex provides a 12 months warranty on all its telecommunication equipment.
During the warranty period the manufacturer ensures technical support and free-of-charge repair at the Enterprise which is situated in Novosibirsk.
As part of the warranty service, technical support is provided on the first-in first-out principle.
The priority support packages of 8/5 and 27/7 types are subjects to additional charges.

News

All news