New
Industrial switch MES3710P
Mass production
Key features
- Bandwidth up to 24 Gbps
- Non-blocking architecture
- Passive cooling
- Advanced L2 functions
- Basic L3 functions
- Multicast support (IGMP Snooping, MVR)
- Advanced security functions (L2-L4 ACL, IP Source Guard, Dynamic ARP Inspection, etc.)
Show all
Specifications
Documents and files
Warranty
Interfaces
1Values are for one-way transmission
- 10/100/1000BASE-T PoE/PoE+ (RJ-45) - 8
- 1000BASE-X/100BASE-FX (SFP) - 4
- Console port RS-232 (RJ-45) - 1
- Bandwidth - 24 Gbps
- Throughput for 64 bytes¹ - 17.8 MPPS
- Buffer memory - 2 MB
- RAM (DDR3) - 512 MB
- ROM (SPI Flash) - 64 MB
- MAC table - 32768
- ARP table - 1000
- VLAN table - 4094
- L2 Multicast groups (IGMP Snooping) - 4094
- L3 Multicast groups (IGMP Proxy) - 2048
- SQinQ rules - 768 (ingress)/1024 (egress)
- MAC ACL rules - 766
- IPv4/IPv6 ACL rules - 640/320
- L3 IPv4 Unicast routes - 1958
- VRRP switches - 32
- L3 interfaces - 8 VLAN, up to 5 IPv4 addresses for each VLAN, up to 300 IPv6 GUA for all VLANs in summary
- Link Aggregation Groups (LAG) - 24 groups, up to 8 ports per LAG
- Quality of Service (QoS) - 8 output queues per port
- Jumbo frames - 12288 bytes
- Head-of-line blocking (HOL) protection
- Auto MDI/MDIX
- Jumbo frames
- Flow control (IEEE 802.3X)
- Port mirroring (SPAN, RSPAN)
- Independent learning mode per VLAN
- MAC Multicast Support
- Configurable aging time of MAC addresses
- Static MAC Entries
- MAC Change logging on ports
- MAC Flapping
- 802.1Q
- Q-in-Q
- Selective Q-in-Q
- GVRP
- MAC-based VLAN
- Protocol-based VLAN
- Multicast profiles
- Multicast static groups
- IGMP Snooping v1,2,3
- Port/host based IGMP snooping Fast Leave
- IGMP proxy-report
- Support for IGMP authorization via RADIUS
- IGMP Querier
- MVR
- STP (Spanning Tree Protocol, IEEE 802.1d)
- RSTP (Rapid Spaning Tree Protocol, IEEE 802.1w)
- MSTP (Multiple Spanning Tree Protocol, IEEE 802.1s)
- STP Root Guard
- STP Loop Guard
- STP BPDU Guard
- BPDU Filtering
- Spanning Tree Fast Link option
- Loopback Detection (LBD)
- Port isolation
- Storm control for different types of traffic (broadcast, multicast, unknown unicast)
- Layer 2 Protocol Tunneling (L2PT)
- ERPS (G.8032v2)
- IGMP proxy (RFC 4605)
- IGMP proxy fast-leave
- Static IPv4 routes
- VRRP
- Static LAG
- Dynamic LAG (LACP)
- LAG Balancing Algorithms
- IPv6 Host
- Dual-stack
- Virtual Cable Testing (VCT)
- Optical transceiver diagnostics
- DHCP Snooping
- DHCP option 82
- MAC-based authentication, Port Security, static MAC entries
- Port-based authentication IEEE 802.1x
- DoS attack prevention
- Traffic segmentation
- DHCP client filtering
- BPDU attack prevention
- PPPoE Intermediate Agent
- IP Source Guard
- Dynamic ARP Inspection
- DHCPv6 Snooping
- IPv6 Source Guard
- IPv6 ND Inspection
- IPv6 RA Guard
- L2-L3-L4 ACL (Access Control List)
- IPv6 ACL
-
ACL based on:
- Physical port number
- IEEE 802.1p
- VLAN ID
- EtherType
- DSCP
- Protocol type
- TCP/UDP port number
- User Defined Bytes
- Shaping
- Policing according to sr-TCM and tr-TCM
- IEEE 802.1p CoS
- Scheduling algorithms: Strict priority/Weighted Round Robin (WRR)
- IEEE 802.1p priority adjustment for Management VLAN
- ACL-based traffic classification
- ACL-based DSCP to CoS, CoS to DHCP remarking
- ACL-based VLAN assignment
- 802.3ah Ethernet Link OAM
- Dying Gasp
- 802.3ah Unidirectional Link Detection
- Configuration file download and upload via TFTP/SFTP
- Automatic backup of configuration file via TFTP/SFTP
- SNMP (Simple Network Management Protocol)
- Command Line Interface (CLI)
- Web interface
- Syslog
- SNTP (Simple Network Time Protocol)
- Traceroute
- LLDP (802.1ab) + LLDP MED
- Processing of management traffic with two 802.1Q headers
- Authorization of entered commands using TACACS+ server
- Access control — privilege levels
- Management interface blocking
- Local authentication
- IP address filtering for SNMP
- RADIUS, TACACS+ (Terminal Access Controller Access Control System) client
- SSH server, Telnet server
- SSH client, Telnet client
- Macro commands
- Input commands logging via TACACS+
- DHCP autoprovision
- DHCP Relay (support for IРv4)
- DHCP Relay Option 82
- DHCP server
- PPPoE Circuit-ID tag adding
- Flash File System
- Debugging commands
- Limiting of traffic to CPU
- Password encryption
- Ping (support for IPv4/IPv6)
- IPv4/IPv6 static routes support
- Support for several versions of configuration file
- Traceroute
- LLDP (802.1ab) + LLDP MED
- Processing of management traffic with two 802.1Q headers
- Authorization of entered commands using TACACS+ server
- Access control — privilege levels
- Management interface blocking
- Local authentication
- IP address filtering for SNMP
- RADIUS, TACACS+ (Terminal Access Controller Access Control System) client
- SSH server, Telnet server
- SSH client, Telnet client
- Macro commands
- Input commands logging via TACACS+
- DHCP autoprovision
- DHCP Relay (support for IРv4)
- DHCP Relay Option 82
- DHCP server
- PPPoE Circuit-ID tag adding
- Flash File System
- Debugging commands
- Limiting of traffic to CPU
- Password encryption
- Ping (support for IPv4/IPv6)
- IPv4/IPv6 static routes support
- Support for several versions of configuration file
- Interface statistics
- CPU utilization monitoring per task and per queue
- RAM utilization monitoring
- Temperature monitoring
- TCAM monitoring
- RFC 1065, 1066, 1155, 1156, 2578 MIB Structure
- RFC 1212 Concise MIB Definitions
- RFC 1213 MIB II
- RFC 1215 MIB Traps Convention
- RFC 1493, 4188 Bridge MIB
- RFC 1157, 2571-2576 SNMP MIB
- RFC 1901-1908, 3418, 3636, 1442, 2578 SNMPv2 MIB
- RFC 2465 IPv6 MIB
- RFC 2737 Entity MIB
- RFC 4293 IPv6 SNMP Mgmt Interface MIB
- Private MIB
- RFC 1398, 1643, 1650, 2358, 2665, 3635 Ether-like MIB
- RFC 2668 802.3 MAU MIB
- RFC 2674, 4363 802.1p MIB
- RFC 2233, 2863 IF MIB
- RFC 2618 RADIUS Authentication Client MIB
- RFC 4022 MIB for TCP
- RFC 4113 MIB for UDP
- RFC 3289 MIB for Diffserv
- RFC 2620 RADIUS Accounting Client MIB
- RFC 768 UDP
- RFC 791 IP
- RFC 792 ICMPv4
- RFC 2463, 4443 ICMPv6
- RFC 793 TCP
- RFC 2474, 3260 DS field definition in IPv4 and IРv6 headers
- RFC 1321, 2284, 2865, 3580, 3748 Extensible Authentication Protocol (EAP)
- RFC 2571, RFC 2572, RFC 2573, RFC 2574 SNMP
- RFC 826 ARP
- RFC 854 Telnet
- IEC 61850
- Power supply:
- with PoE enabled: 48–57 V DC
- with PoE disabled: 18–57 V DC
-
Input current
- with PoE enabled: 6–4.5 A
- with PoE disabled: 1.1–0.3 A
- Maximum power consumption (including PoE) - 275 W
- PoE budget - 240 W (for 802.3at applications, 54–56 V DC)
- Heat dissipation - 40 W
- Reverse polarity protection
- Signal relay - one signal relay output: 1 A, 24 V DC
- Operating temperature - from -40 to +70 °C
- Storage temperature - from -50 to +85 °C
- Operating humidity - from 5 to 95 % (non-condensing)
- Passive cooling
- Case - metal, IP30
- Form factor - DIN rail for wall mounting (optional in supply package)
- Dimensions (W × H × D) - 85 × 175 × 115 mm
- Weight - 1.77 kg
- Security - UL 508
-
Electromagnetic compatibility:
- EN 55022 Class A
- EN 61000-4-2 (ESD) Level 3
- EN 61000-4-3 (RS) Level 3
- EN 61000-4-4 (EFT) Level 3
- EN 61000-4-5 (Surge) Level 3
- EN 61000-4-6 (CS) Level 3
- EN 61000-4-8
-
Application within power engineering facilities:
- IEC 61850-3
- IEEE 1613
- Shock - IEC 60068-2-2
- Free fall - IEC 60068-2-32
- External mechanical stress - 0,5–55 Hz, 1g, 3g single strikes
1Values are for one-way transmission
Show all
Descriptions
Operational lifetime of the ELTEX equipment
In development
1
Pre-production
2
Mass production
3
Mass production is over
4
Sold out
5
Support is over
6
During the warranty period the manufacturer ensures technical support and free-of-charge repair at the Enterprise which is situated in Novosibirsk.
As part of the warranty service, technical support is provided on the first-in first-out principle.
The priority support packages of 8/5 and 27/7 types are subjects to additional charges.
News
