Ethernet Access Switch MES2428P
- Advanced L2 features
- Support for Multicast (IGMP Snooping, MVR)
- Advanced security functions (L2-L4 ACL, IP Source Guard, Dynamic ARP Inspection, etc.)
The switches support Virtual Local Area Networks (VLAN), multicast groups and advanced security functions.
- 24x10/100/1000BASE-T PoE/PoE+
- 4xCombo 10/100/1000BASE-T/100BASE-FX/1000BASE-X
- Console port RS-232/RJ-45
- Bandwidth - 56 Gbps
- Throughput for 64-byte packets1 - 41.658 MPPS
- Buffer memory - 512 KB
- RAM (DDR3) - 256 MB
- ROM (SPI Flash) - 32 MB
- MAC table - 8192
- ARP table - 1000
- VLAN table - 4094
- L2 Multicast groups (IGMP Snooping) - 509
- SQinQ rules - 128 (ingress)/256 (egress)
- MAC ACL rules - 381
- IРv4, IPv6 ACL rules - 219/128
- L3 interfaces - 8 VLAN, up to 5 of IPv4 addresses for each VLAN, up to 300 of IPv6 GUA for all VLANs in summary
- Link Aggregation Groups (LAG) - 8 groups, up to 8 ports in one LAG
- QoS - 8 egress queues per port
- Jumbo frames - max. packet size is 10000 bytes
- Head-of-line blocking (HOL) protection
- Auto MDI/MDIX
- Jumbo frames
- Flow Control IEEE 802.3X
- Port mirroring (SPAN, RSPAN)
- Independent learning mode per VLAN
- MAC Multicast Support
- Configurable aging time of MAC addresses
- Static MAC Entries
- MAC change events monitoring per ports
- MAC Flapping
- IEEE 802.1Q
- Q-in-Q
- Selective Q-in-Q
- GVRP
- MAC-based VLAN
- Protocol-based VLAN
- Multicast profiles
- Multicast static groups
- IGMP Snooping v1,2,3
- Port-based IGMP Snooping fast-leave
- IGMP Proxy reporting
- IGMP through RADIUS
- MLD Snooping v1,2
- MLD Snooping fast-leave
- IGMP Querier
- MVR
- STP (Spanning Tree Protocol, IEEE 802.1d)
- RSTP (Rapid Spanning Tree Protocol, IEEE 802.1d)
- MSTP (Multiple Spanning Tree Protocol, IEEE802.1s)
- STP Root Guard
- STP Loop Guard
- STP BPDU Guard
- BPDU Filtering
- Spanning Tree Fast Link option
- Layer 2 Protocol Tunneling
- Loopback Detection (LBD)
- Port isolation
- Storm Control for different types of traffic (broadcast, multicast, uknown unicast)
- IGMP proxy (RFC 4605)
- IGMP proxy fast-leave
- Static LAG
- Dynamic LAG
- LAG Balancing Algorithm
- Virtual Cable Test (VCT)
- Optical transceiver diagnostics
- IPv6 Host
- Dual-stack
- DHCP Snooping
- DHCP Option 82
- IP Source Guard
- Dynamic ARP Inspection (Protection)
- MAC-based authentication, Port Security, Static MAC addresses
- IEEE 802.1x based authentication per ports
- DoS attack prevention
- Traffic segmentation
- DHCP clients filtering
- BPDU attacks prevention
- PPPoE Intermediate Agent
- DHCPv6 Snooping
- IPv6 Source Guard
- IPv6 ND Inspection support
- IPv6 RA Guard support
- L2-L3-L4 ACL
- IPv6 ACL
- ACL based on:
- Switch port
- IEEE 802.1p priority
- VLAN ID
- EtherType
- DSCP
- IP protocol type
- TCP/UDP port number
- User Defined Bytes
- Switch port
- Shaping, policing
- Support for IEEE 802.1p Class of Service
- Queue scheduling algorithms: Strict Priority/Weighted Round Robin (WRR)
- ACL-based traffic classification
- ACL-based CoS/DSCP mark assignment
- CoS to DSCP, DSCP to CoS remarking
- DSCP to CoS remarking
- ACL-based VLAN assignment
- IEEE 802.3ah, Ethernet OAM
- Dying Gasp
- IEEE 802.3ah Unidirectional Link Detection (UDLD)
- Download and upload of configuration file via TFTP/SFTP
- Automated backup of configuration file via TFTP/SFTP
- Simple Network Management Protocol (SNMP)
- Command Line Interface (CLI)
- Web interface
- Syslog
- Simple Network Time Protocol (SNTP)
- Traceroute
- LLDP (IEEE 802.1ab) + LLDP MED
- Two 802.1Q headers traffic control
- Commands Authorization using TACACS+ server
- IPv4/IPv6 ACL support for device control
- Switch access management – privilege levels for users
- Management interface blocking
- Local authentication
- IP addresses filtering for SNMP
- RADIUS and TACACS+ (Terminal Access Controller Access Control System) clients
- Telnet client, SSH client
- Telnet server, SSH server
- Macro commands
- Input commands logging via TACACS+ protocol
- DHCP auto configuration
- DHCP Relay (IРv4 support)
- DHCP Relay Option 82
- PPPoE Circuit-ID tag adding
- Flash File System
- Debug commands
- CPU traffic limiting
- Password encryption
- Ping (IPv4/IPv6 routing
- Support for several versions of configuration file
- Interface statistics
- CPU utilization monitoring per task and per queue
- RAM usage monitoring
- Temperature monitoring
- TCAM monitoring
- RFC 1065, 1066, 1155, 1156, 2578 MIB Structure
- RFC 1212 Concise MIB Definitions
- RFC 1213 MIB II
- RFC 1215 MIB Traps Convention
- RFC 1493, 4188 Bridge MIB
- RFC 1157, 2571-2576 SNMP MIB
- RFC 1901-1908, 3418, 3636, 1442, 2578 SNMPv2 MIB
- RFC 2465 IPv6 MIB
- RFC 2737 Entity MIB
- RFC 4293 IPv6 SNMP Mgmt Interface MIB
- Private MIB
- RFC 1398, 1643, 1650, 2358, 2665, 3635 Ether-like MIB
- RFC 2668 802.3 MAU MIB
- RFC 2674, 4363 802.1p MIB
- RFC 2233, 2863 IF MIB
- RFC 2618 RADIUS Authentication Client MIB
- RFC 4022 MIB for TCP
- RFC 4113 MIB for UDP
- RFC 3289 MIB for Diffserv
- RFC 2620 RADIUS Accounting Client MIB
- RFC 768 UDP
- RFC 791 IP
- RFC 792 ICMv4
- RFC 2463, 4443 ICMPv6
- RFC 793 TCP
- RFC 2474, 3260 Definition of the DS Field in the IPv4 and IPv6 Headers
- RFC 1321, 2284, 2865, 3580, 3748 Extensible Authentication Protocol (EAP)
- RFC 2571, RFC 2572, RFC 2573, RFC 2574 SNMP
- RFC 826 ARP
- RFC 854 Telnet
- IEC 61850
- Power supply:
- 176-264 V AC, 50-60 Hz
- 36 – 72 V DC
- Input current
- AC: 2.4 – 1.6 A
- DC: 12.5 - 6.3 A
- Maximum power consumption (including PoE):
- AC: 420 W
- DC: 450 W
- PoE budget - 370 W
- Heat dissipation:
- AC: 50 W
- DC: 80 W
- Hardware support for Dying Gasp (MES2428P AC)
- Operating temperature - from -20 to +50 °С
- Storage temperature - from -40 to +70 °С
- Operating humidity - no more than 80%
- Cooling - 2 fans
- Form factor - 19", 1U
- Dimensions (WxHxD), mm:
- AC: 430x44x204
- DC: 430x44x305
- Weight - 3.27 kg
1Values are for one-way transmission
|
SFP modules (doesn't included in basic package) |
|
|
1 fiber |
Part Number |
|
SFP 1.25 GE module, 3 km, SM, 1 fiber, TX/RX 1310/1550 SC set, DDM |
FH-SB3512CDS3 / FH-SB5312CDS3 |
|
SFP 1.25 GE module, 3 km, SM, 1 fiber, TX/RX 1310/1550 LC set, DDM |
FH-SB3512CDL3 / FH-SB5312CDL3 |
|
SFP 1.25 GE module, 20 km, SM, 1 fiber, TX/RX 1310/1550 SC set, DDM |
FH-SB3512CDS20 / FH-SB5312CDS20 |
|
SFP 1.25 GE module, 20 km, SM, 1 fiber, TX/RX 1310/1550 LC set, DDM |
FH-SB3512CDL20 / FH-SB5312CDL20 |
|
SFP 1.25 GE module, 20 km, SM, 1 fiber, TX/RX 1310/1550 SC set, DDM, INDUSTRIAL |
FH-SB3512IDS20 / FH-SB5312IDS20 |
|
SFP 1.25 GE module 40 km, SM, 1 fiber, TX/RX 1310/1550 LC set, DDM |
FH-SB3512CDL40 / FH-SB5312CDL40 |
|
SFP 1.25 GE module 40 km, SM, 1 fiber, TX/RX 1310/1550 SC set, DDM |
FH-SB3512CDS40 / FH-SB5312CDS40 |
|
SFP 1.25 GE module 80 km, SM, 1 fiber, TX/RX 1490/1550 LC set, DDM |
FH-SB4512CDL80 / FH-SB5412CDL80 |
|
SFP 1.25 GE module 80 km, SM, 1 fiber, TX/RX 1490/1550 SC set, DDM |
FH-SB4512CDS80 / FH-SB5412CDS80 |
|
SFP 1.25 GE module 120 km, SM, 1 fiber, TX/RX 1490/1550 LC set, DDM |
FH-SB4512CDL120 / FH-SB5412CDL120 |
|
SFP 1.25 GE module 120 km, SM, 1 fiber, TX/RX 1490/1550 SC set, DDM |
FH-SB4512CDS120 / FH-SB5412CDS120 |
|
SFP 1.25 GE module 160 km, SM, 1 fiber, TX/RX 1490/1550 LC set, DDM |
FH-SB4512CDL160 / FH-SB5412CDL160 |
|
2 fibers |
|
|
SFP 1.25 GE module 550 m, MM, 2 fibers, 850 nm, LC, DDM |
FH-S8512CDL05 |
|
SFP 1.25 GE module 2 km, ММ, 2 fibers, 1310 nm, LC, DDM |
FH-S3112CDL2 |
|
SFP 1.25 GE module 20 km, SМ, 2 fibers, 1310 nm, LC, DDM |
FH-S3112CDL20 |
|
SFP 1.25 GE module 40 km, SМ, 2 fibers, 1310 nm, LC, DDM |
FH-S3112CDL40 |
|
SFP 1.25 GE module 80 km, SМ, 2 fibers, 1550 nm, LC, DDM |
FH-S5512CDL80 |
|
SFP 1.25 GE module 120 km, SМ, 2 fibers, 1550 nm, LC, DDM |
FH-S5512CDL120 |
|
SFP 1.25 GE module 160 km, SМ, 2 fibers, 1550 nm, LC, DDM |
FH-S5512CDL160 |
|
SFP transceivers with RJ-45 interface |
|
|
SFP transceiver of 10/100/1000 BASE-T |
FH-ST2 |
During the warranty period the manufacturer ensures technical support and free-of-charge repair at the Enterprise which is situated in Novosibirsk.
As part of the warranty service, technical support is provided on the first-in first-out principle.
The priority support packages of 8/5 and 27/7 types are subjects to additional charges.
