Firmware update for WLC Wi-Fi controllers. Version 1.30.8

Wi-Fi

05 December 2025

Firmware update

Firmware version: 1.30.8

The firmware and detailed description of the product capabilities are available in the Downloads or on the product page.

Key changes in 1.30.8

Reliability:
- Monitoring the status of an external RADIUS server in a RADIUS requests proxying scheme
Convenience:
- WIDS configuration in the WEB interface
- Ability to export AP lists to a .csv file
Analytics:
- Information on the number of clients at different authentication stages

Monitoring and management

CLI:
- Added the ability to configure ACLs for outgoing traffic
WEB:
- Monitoring
  - Added the ability to export AP lists to a .csv file
- Configuration
  - Added WIDS configuration
  - Added configuration of 802.11r roaming between locations on the “General settings” page
  - Added a setting in the RADIUS profile to use the client's MAC address as an authentication password when working with an external portal
  - Added the ability to configure multiple VLANs for a single SSID
  - Added a compatibility mode setting for iOS devices (captive-adaptive) in the AP settings profile
  - Added a portal profile setting to disable HTTP/HTTPS authentication when working with an external portal
WLC:
- Added saving of the AirTune operational state after reboot
- Monitoring
  - Added the show wlc ap main-info command to view AP inventory information
  - Added the show wlc ap all command to view a full AP list, including registered APs and APs configured in the system
  - Added the show radius-servers command to view the status of the upstream server (external RADIUS server) in a RADIUS requests proxying scheme
  - Added display of APs configured in the system but not connected to the controller (status: Pre-configured)
  - Added display of AP uptime in Active status to the extended AP monitoring
  - Changed the clear wlc ap command to clear wlc ap all
  - Added information to extended client monitoring showing the client authentication method and its status
  - Added the show wlc clients auth-method command for filtering clients by authentication methods and statuses
  - Added the show wlc clients auth-count command for viewing the number of clients at different authentication stages
SNMP:
- Added OIDs for viewing client authentication methods and statuses, as well as the number of clients at various authentication stages
- Added OIDs for viewing license usage
- Added OIDs for viewing the number of Firewall connections by protocol
- Added OIDs for viewing the status of an external RADIUS server in a RADIUS requests proxying scheme
- Added OIDs for viewing AP uptime in Active status
- Added OIDs for viewing the list of all APs (registered and configured) indexed by MAC address

List of fixes in the version

Unstable results when measuring channel characteristics using UDP-Jitter tests in IP SLA
Display of the L2loc parameter in the BRAS redirect string for Port-channel interfaces; the parameter was transmitted in HEX
Display of the L2loc parameter in the BRAS redirect string when a location is set on a physical interface/sub-interface; if the parameter is set, it is transmitted in the L2loc field
Database migration fix when upgrading to the current software version non-sequentially
Cyclic sending of an aggregated route in BGP
Removed transmission of disabled ipv4-acl rules to APs
Memory leak with a configured syslog host
Memory leak with configured QoS
Obtaining BRAS VRRP status in a cluster scheme
Increased rootfs partition size on ESR/WLC-15 to 600 MB