Firmware update for WLC hardware Wi-Fi controllers. Version 1.30.4

Firmware Version: 1.30.4

The firmware and detailed description of the product capabilities are available in the Downloads or on the product page.

Note: Starting with version 1.30.4, the maximum size of WLC logs is limited to 90 days. When updating, the size of existing logs will be automatically reduced.

• Security:
  • Full audit of administrator actions in the WEB interface via TACACS+ / RADIUS / Syslog
  • Support for passive radio environment scanning
• Convenience:
  • Guest portal configuration directly in the WEB interface
  • Flexible filtering of client and access point lists
• Analytics:
  • Additional statistics of access point events
• Reliability:
  • Synchronization of access point firmware in backup mode
  • Ability to transfer WLC logs to HDD

• Monitoring:
  • Implemented accounting of actions in the WEB server via TACACS+, RADIUS, Syslog
  • syslog web-commands for logging actions in the WEB
  • logging wlc-events/logging wlc-journal command for enabling sending WLC logs to syslog server
• WEB:
  • Filtering on the "Access points" and "Clients" pages
  • Pagination when displaying data on the "Access points", "Clients", "Event log" pages
  • CPU load graph
  • Client IP address on client monitoring pages
  • "VLAN number" column in the virtual access points table
  • "Range" column in the clients table
  • Monitoring of the 802.11v parameter on the "Roaming data" page
  • "Client IP address changed" check-box in the client log
  • Portal authorization settings
  • Configuring the 82 DHCP option on AP
  • Configuring the 802.11v in the AirTune profile
  • Configuring the "Country code" in the AP profile
  • Configuring the IEEE 802.11 n/ac, a/n/ac modes for 5 GHz radio interface in the individual AP settings
  • Improved adaptation of the WEB interface to different screen resolution
• WLC:
  • Ability to transfer the log to HDD
  • Optimized AP connection speed
  • Display the "VLAN" in the show wlc ap vap command output
  • Display the range in which the client operates in the show wlc clients command output
  • Display the ap-location in the AP log
  • Display the band in the AP log
  • Configuring the MQTT positioning for WEP-1L, WEP-2L, WOP-2L, WEP-3L
  • Configuring the WIDS/WIPS for WEP-200L and WOP-20L
  • neighbour-scan command in the ap-profile for configuring passive scanning on WOP/WEP-30L, WEP-30L-Z, WOP-30LS, WOP-30LI
  • show wlc statistics command block for displaying statistics on clients and AP events
  • arp suppression command for configuring ARP conversion from Broadcast and Unicast
  • lldp-server command block in ap-profile/services for configuring LLDP
  • lldp command block in ap-profile/trace for configuring LLDP logging
  • Ability to add NAS IP to the redirect address when configuring portal authorization via RADIUS
  • Processing of deauth-attack in WIDS
  • load-balance roaming clients max/min commands in airtune-profile for configuring the maximum/minimum number of users during balancing
  • 802.11r cross-location-roaming command in AirTune settings to enable 802.11r roaming between locations
  • The maximum size of WLC logs is limited to 90 days. When updating to 1.30.4 firmware version, the size of existing logs will be automatically reduced.
  • Synchronization of AP firmware in the redundancy scheme
• SNMP:
  • Optimization of WLC tables

• Duplication of wireless client sessions in the WEB
• Incorrect status when ending a session in the WEB
• Error "RRM:rrm request for start optimization, location '<location name>' failed, reason: 'failure from airtune api'" when starting AirTune optimization for location
• Reason for the "RRM:Cannot backup domains info: 'malformed answer from airtune api'" log
• AP status change to the "Cfg failed" after deleting radio-2g-profile/radio-5g-profile
• AP status change to the "Failed" due to: "CoA timeout expired" when switching to the backup controller
• Service wlc_gre error termination
• Problem with obtaining an IP address via DHCP for clients using Broadcast check-box in the tunneling scheme
• Reason for the "IS_NE check failed: stat_map->entry_sz (170 != 8) !!! on WLC-3200" log
• Error when entering the path of external media for storing IPS rules
• Error "PLUGIN_AUTH_USER_PASS_VERIFY failed with status 1" due to the use of uppercase letters in the OpenVPN server configuration
• Traffic classification by match access-group and DSCP
• show mac address-table command output when WLC is operating in a client traffic tunneling scheme
• Allowed to specify the user name as a MAC address in the access profile
• IPsec tunneling with XAuth authorization
• Speed of SoftGRE tunnel establishment with LLDP enabled
• Error in the show wlc ap detailed command output when using 40 MHz radio channel width
• Error ESRinfo_wlc_service_activator_aps_MAX when requesting VAP