Ru En
Designer and manufacturer of communication equipment
Russia (GMT +7)

WOP-2ac-LR2 SYNC base station

Personal order only
Key benefits
  • Base station with support for 802.11b/g/n (2.4G Wi-Fi)
  • Radio interface with MIMO 2x2 support
  • Radio module power up to 26 dBm
Base station
WОP-2ac-LR2 SYNC is designed to organize Broadband wireless networks in private housing, that provide broadband access to the Internet in a long distances. The device is a good choice for wireless network construction in a difficult climatic conditions. WOP-2ac-LR2 SYNC operates well in a wide oper-ating temperature range and in high humidity (different climatic zones). The device allows connecting different sector antennas.

Scalability
The base station WОP-2ac-LR2 SYNC — an up-to-date flexible solution that provides expanded coverage zone due to its power of the transmitter (up to 26 dBm) and using of sector an-tennas. It is possible to deploy wireless IT infrastructure fast and easily by virtue of high-performance hardware, scalability and intuitive interface.

Wireless connection
The base station WOP-2ac-LR2 SYNC provides data rate up to 300 Mbps due to the support for IEEE 802.11n standard. Furthermore, the support for MIMO technology and use of sector antennas make the device an universal solution for broadband access network organization.

Performance
To ensure stable and uninterrupted operation, the device is equipped with high-performance chipsats providing high data processing rates and effective operating via FBWA (Fixed Bandwidth Wireless Access) technology.

Inter-sector synchronization
WOP-2ac-LR2 SYNC devices support inter-sector synchronization mechanism. This functionality allows to construct multi-sector bases in conditions of limited frequency resource or use adjacent frequencies an neighboring sectors.

WOP-2ac-LR2_SYNC.png


Security
The device uses up-to-date technologies of authentication to provide a secure connection. Particularly, WPA2 encryption is used, as well as centralized authorization through a RADIUS server (WPA2-Enterprise).

Division of access rights by roles with the possibility of authentication by local account, as well as via the RADIUS server is provided for the management of the base station.

Power supply
The PoE+ technology makes it possible to install the equipment virtually anywhere, regardless of the power supply location, reduces total cost by discarding power cables and performs the installation easier and faster.
Specifications
Modules and additional devices
Documents and files
Warranty
Interfaces
  • 1 Combo port 10/100/1000BASE-T (Ethernet)/100/1000BASE-X (SFP)
  • 2 SMA-type connectors (female) for external antennas (Omni, sector, rod, etc.)
  • Wi-Fi 2.4 GHz IEEE 802.11b/g/n
WLAN capabilities
  • Support for IEEE 802.11b/g/n
  • Data aggregation, including A-MPDU (Tx/Rx) and А-MSDU (Rx)
  • Priorities and packet planning based on WMM
  • Hidden SSID support
  • 4 virtual access points
  • Support for MAC ACL
  • External access points detection
  • APSD
  • Spectrum analyzer
  • Support for wireless bridges (WDS)
  • Support for fixed center frequency
  • Inter-sector synchronization (PTP)
Network functions
  • Automatic negotiation of speed and duplex mode, switching over MDI and MDI-X modes
  • Support for VLAN (Access, Trunk, General)
  • VLAN mapping
  • DHCP client
  • Support for NTP
  • Support for Syslog
  • DHCP snooping
  • IGMP snooping
  • BPDU filtering
QoS functions
  • Bandwidth limiting for each SSID
  • Client data rate limiting for each SSID
  • Changing WMM parameters for radio interface
  • Support for prioritization by CoS, DSCP and VLAN ID
Security
  • Centralized authentication via RADIUS server (WPA/WPA2 Enterprise)
  • WPA/WPA2 encryption
  • 64/128/152-bit WEP encryption of data
Wireless interface parameters
  • Frequency range 2402–2482 MHz
  • DSSS, CCK, BPSK, QPSK, 16QAM, 64QAM modulation
  • Support for MIMO 2х2
  • Bandwidth: 5, 10, 20, 40 MHz
Operating channels1
  • 802.11b/g/n: 1–13 (2402–2482 MHz)
Data rate2
  • 802.11b: up to 11 Mbps
  • 802.11g: up to 54 Mbps
  • 802.11n: up to 300 Mbps
Receiver sensitivity
  • 2.4 GHz: up to -98 dBm
Maximum power of the transmitter1
  • 2.4 GHz: 26 dBm
Configuration
  • Remote control via Telnet, SSH
  • Web interface
  • CLI
  • NETCONF
  • SNMP (Monitoring)
Physical specifications
  • Power consumption up to 13 W
  • 32 MB Flash
  • 128 MB RAM
  • Power supply:
    • PoE+ 48V/56V (IEEE 802.3at-2009
  • Operating temperature from -45 С to +65 С
  • IP54 protection level
  • Dimensions (WxHxD): 88x232.5x47 mm
  • Pole mount

The number of channels and the value of the maximum output power will vary according to the rules of radio frequency regulation in your country.

The maximum wireless data rate is defined according

RFE 50-65/90/16 MIMO antenna

3.png

Operating frequency range, MHz

5100 - 6500

Amplification ratio, dBi

16

VSWR

no more than 1.5

Max. power, W

50

Input resistance, Ohm

50

Polarization

Linear, Vertical and Horizontal

Antenna weight, kg

1.2

Antenna dimensions, mm

250х250х30

Attachment weight, kg

0.1

Attachment dimensions, mm

100х120х40

Attachment mast diameter, mm

25-53

Connector

2 x SMA Female

Operating temperature, °С

from -40°C to +60°C

Rear radiation level

-40 dB

Cross-polarization level

-23 dB

Isolation between ports

-30 dB

Radiation angle on horizontal plane                   

90°

Radiation angle on vertical plane

 Jumper for antenna, 1.5/3 mm, (SFF50-3)-SMA(J)-SMA(J)

4.png

Conductor material

 copper

 Isolation material

 RG142

 Termination by connector from the both sides

 SMA (Male)

 Available length

 1.5 and 3 mm

 Central conductor diameter

 0.94 mm

 Application 

 Connector for sectoral antennas connection to Wi-Fi access points

 Form factor

 Outdoor for connection to Outdoor access points


Operational lifetime of the ELTEX equipment
In development
1
Pre-production
2
Mass production
3
Mass production is over
4
Sold out
5
Support is over
6
Regardless of the operational lifetime stage, Eltex provides a 12 months warranty on all its telecommunication equipment.
During the warranty period the manufacturer ensures technical support and free-of-charge repair at the Enterprise which is situated in Novosibirsk.
As part of the warranty service, technical support is provided on the first-in first-out principle.
The priority support packages of 8/5 and 27/7 types are subjects to additional charges.

Помогите сделать
сайт лучше