New
Wireless access point WOP-30L
Mass production
- Dual band access point
- Support for 802.11ax
- Radio interface with MU-MIMO 2×2 support
- PoE+ power supply (IEEE 802.3at-2009)
- Up-to-date authentication and encryption means
WOP-30L, a next-generation Wi-Fi 6 access point, provides a high-speed and secure wireless network, that combines many features and services needed for comfortable access in crowded places. With high speed, low latency, energy efficiency, increased bandwidth and extended range, new access points will be able to provide many additional services.
WOP-30L is an indispensable solution for organizing a wireless network in various climatic conditions, in a wide range of operating temperatures and high humidity (parks, factories, stadiums, etc.), and is also an ideal platform for organizing communications in cottage settlements and remote settlements.
Scalability
The WOP-30L wireless access point is the latest flexible solution that allows changing the network coverage area, thereby increasing the number of mobile devices served. The high performance of the hardware platform, scalability and intuitive interface make it easy and quick to deploy a wireless IT infrastructure.
Wireless connection
Due to support for IEEE 802.11ax standard the WOP-30L access point provides 574 Mbps (2.4 GHz) + 1201 Mbps (5 GHz) data rates. The use of MU-MIMO technology and omnidirectional antennas makes WOP-30L a universal solution for corporate networks construction.
Security
For the corporate environment, modern WPA3 authentication and encryption technologies are supported, which provide personal data protection and environment security. The new generation access points meet the highest security and compatibility requirements for earlier versions of the 802.11 standard.
Performance
The high-performance processors are used in the devices in order to provide reliability and high data processing rates.
Power supply
The PoE+ technology makes installation of the equipment possible virtually everywhere, regardless of the power supply location. That reduces total cost by discarding power cables and makes installation easier and faster.
Show all
Specifications
Documents and files
Warranty
Interfaces
2.4 GHz, 802.11ax: 574 Mbps
5 GHz, 802.11ax: 1201 Mbps
Maximum power of the transmitter2
1Will be fully supported in future releases.
2The number of channels and the value of the maximum output power will vary according to the rules of radio frequency regulation in your country.
3The maximum wireless data rate is defined according to IEEE 802.11 standard. The real bandwidth can be different. Conditions of the network, environment, the amount of traffic, building materials and constructions and network service data can decrease the real bandwidth. The environment can influence on the network coverage range.
- 1 port of 10/100/1000/2500BASE-T (RJ-45) with PoE+ support
- Wi-Fi 2.4 GHz IEEE 802.11b/g/n/ax
- Wi-Fi 5 GHz IEEE 802.11a/n/ac/ax
- 4 SMA-type connectors (female) for connecting external antennas (Omni, sector, panel, etc.)
- Support for IEEE 802.11a/b/g/n/ac/ax
- Support for roaming IEEE 802.11r/k/v1
- Data aggregation, including A-MPDU (Tx/Rx) and A-MSDU (Rx)
- WMM-based packet priorities and planning
- Dynamic frequency selection (DFS)
- Support for hidden SSID
- 14 virtual access points
- Detection of access points from other vendors
- Spectrum analyzer1
- APSD
- Automatic speed negotiation, duplex mode negotiation and MDI-MDI-X switch-over
- VLAN support (Access, Trunk, General)
- DHCP client
- GRE
- Transmission of subscriber traffic outside of tunnels
- ACL1
- NTP
- Syslog
- IPv6
- Packet priorities and planning based on profiles
- Bandwidth limiting for each SSID
- Remote management via Telnet, SSH
- CLI
- NETCONF
- Web interface
- SNMP
- Centralized autorization via RADIUS server (802.1X WPA/WPA2 Enterprise)
- WPA/WPA2/WPA3 encryption
- Captive Portal
- Frequency range 2400–2483.5 MHz, 5150–5350 MHz, 5470–5850 MHz
- BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM modulations
- Support for MU-MIMO 2x2
- Support for OFDMA
-
Bandwidth:
- 20, 40 MHz for 2.4 GHz
- 20, 40 and 80 MHz for 5 GHz
- 802.11b/g/n/ax: 1–13 (2402–2482 MHz)
-
802.11a/n/ac/ax:
- 36–64 (5170–5330 MHz)
- 100–144 (5490–5730 MHz)
- 149–165 (5735–5835 MHz)
2.4 GHz, 802.11ax: 574 Mbps
5 GHz, 802.11ax: 1201 Mbps
Maximum power of the transmitter2
- 2.4 GHz: 20 dBm
- 5 GHz: 20 dBm
- 2.4 GHz: up to -92 dBm
- 5 GHz: up to -94 dBm
- Maximum power consumption: no more than 15 W
- 128 MB SPI-NAND Flash
- 256 MB RAM
- Power supply: PoE+ 48 V/56 V (IEEE 802.3at-2009)
- Operating temperature: from -45 to +65 °C
- Ingress protection: IP55
- Pole/wall mount
- Dimensions (W × H × D): 125 × 227 × 49 mm
- Weight: 0.8 kg
1Will be fully supported in future releases.
2The number of channels and the value of the maximum output power will vary according to the rules of radio frequency regulation in your country.
3The maximum wireless data rate is defined according to IEEE 802.11 standard. The real bandwidth can be different. Conditions of the network, environment, the amount of traffic, building materials and constructions and network service data can decrease the real bandwidth. The environment can influence on the network coverage range.
Show all
Operational lifetime of the ELTEX equipment
In development
1
Pre-production
2
Mass production
3
Mass production is over
4
Sold out
5
Support is over
6
During the warranty period the manufacturer ensures technical support and free-of-charge repair at the Enterprise which is situated in Novosibirsk.
As part of the warranty service, technical support is provided on the first-in first-out principle.
The priority support packages of 8/5 and 27/7 types are subjects to additional charges.
News
