New
Wireless access point WOP-20L
Mass production
Key benefits
The WОP-20L wireless access point provides easy and secure access to a high-performance wireless network that combines numerous features and services necessary for convenient network access in crowded areas.
With high speed, low latency, energy efficiency, increased bandwidth and extended range, new access points provide many additional services, compared to access points of the previous Wi-Fi standards.
The device is an indispensable solution for organizing a wireless network in various climatic conditions, in a wide range of operating temperatures and high humidity (parks, factories, stadiums, etc.), and is also an ideal platform for organizing communication in suburban settlements and remote locations.
Scalability
WOP-20L is an up-to-date flexible solution that allows changing the network coverage in order to increase the quantity of serviced mobile devices. Due to high performance hardware platform, scalability features and easy-to-use interface, it is possible to set up IT infrastructure simply and fast.
Wireless connection
Due to support for IEEE 802.11n/ac standards the WOP-20L access point provides up to 300 Mbps (at 2.4 GHz) and up to 867 Mbps (at 5 GHz) data rates.
Security
Up-to-date authentication technologies are provided to ensure a secure connection. In particular, a dynamic key is used, which is unique for each subscriber device connected to WOP-20L.
Performance
To ensure stable and uninterrupted operation of the device, high-performance processors are used, providing reliability and high data processing rates.
Power
The PoE technology makes it possible to install equipment in any place, regardless of the power supply source location. That reduces total cost by discarding power cables and makes installation easier and faster.
- Dual band access point
- Support for 802.11ac
- Radio interface with MIMO 2×2 support
- PoE power supply (IEEE 802.3af-2003)
- Up-to-date authentication and encryption means
The WОP-20L wireless access point provides easy and secure access to a high-performance wireless network that combines numerous features and services necessary for convenient network access in crowded areas.
With high speed, low latency, energy efficiency, increased bandwidth and extended range, new access points provide many additional services, compared to access points of the previous Wi-Fi standards.
The device is an indispensable solution for organizing a wireless network in various climatic conditions, in a wide range of operating temperatures and high humidity (parks, factories, stadiums, etc.), and is also an ideal platform for organizing communication in suburban settlements and remote locations.
Scalability
WOP-20L is an up-to-date flexible solution that allows changing the network coverage in order to increase the quantity of serviced mobile devices. Due to high performance hardware platform, scalability features and easy-to-use interface, it is possible to set up IT infrastructure simply and fast.
Wireless connection
Due to support for IEEE 802.11n/ac standards the WOP-20L access point provides up to 300 Mbps (at 2.4 GHz) and up to 867 Mbps (at 5 GHz) data rates.
The use of MIMO technology and omnidirectional antennas makes WOP-20L a universal solution for corporate networks construction.
Security
Up-to-date authentication technologies are provided to ensure a secure connection. In particular, a dynamic key is used, which is unique for each subscriber device connected to WOP-20L.
Performance
To ensure stable and uninterrupted operation of the device, high-performance processors are used, providing reliability and high data processing rates.
Power
The PoE technology makes it possible to install equipment in any place, regardless of the power supply source location. That reduces total cost by discarding power cables and makes installation easier and faster.
Show all
Specifications
Documents and files
Warranty
Interfaces
1The number of channels and the value of the maximum output power will vary according to the rules of radio frequency regulation in your country.
- 1 port of 10/100/1000BASE-T (RJ-45) with PoE support
- Wi-Fi 2.4 GHz IEEE 802.11b/g/n
- Wi-Fi 5 GHz IEEE 802.11a/n/ac
- 4 SMA connectors (female) for external antennas connection (Omni, sector, panel, etc.)
- Support for IEEE 802.11a/b/g/n/ac
- 802.11r/k/v roaming
- Data aggregation, including A-MPDU (Tx/Rx) and AMSDU (Rx)
- WMM-based packet priorities and planning
- Dynamic frequency selection (DFS)
- Support for hidden SSID
- 14 virtual access points
- External access points detection
- Spectrum analyzer
- WDS support
- APSD support
- Automatic speed negotiation, duplex mode negotiation and MDI-MDI-X switch-over
- VLAN support (Access, Trunk, General)
- DHCP client
- GRE support
- Transmission of subscriber traffic out of tunnels
- ACL support
- NTP support
- Syslog support
- IPv6 support
- Packet priorities and planning based on profiles
- Bandwidth limiting for each SSID
- Remote management via Telnet, SSH
- CLI
- NETCONF
- Web interface
- SNMP
- Centralized autorization via RADIUS server (802.1X WPA/WPA2 Enterprise)
- WPA/WPA2 encryption
- Captive Portal support
- Authorization via RADIUS server when logging in to the device
- Frequency range 2400–2483.5 MHz; 5150–5350 MHz, 5470–5850 MHz
- BPSK, QPSK, 16QAM, 64QAM, 256QAM modulations
- Support for MIMO 2×2
-
Bandwidth:
- 20, 40 MHz for 2.4 GHz;
- 20, 40 and 80 MHz for 5 GHz
- 802.11b/g/n: 1–13 (2402–2482 MHz)
-
802.11a/n/ac:
- 36–64 (5170–5330 MHz)
- 100–144 (5490–5730 MHz)
- 149–165 (5735–5835 MHz)
- 802.11a: up to 54 Mbps
- 802.11b: up to 11 Mbps
- 802.11g: up to 54 Mbps
- 802.11n: up to 300 Mbps
- 802.11ac: up to 867 Mbps
- 2.4 GHz: 18 dBm
- 5 GHz: 20 dBm
- 2.4 GHz: up to -91 dBm
- 5 GHz: up to -93 dBm
- Maximum power consumption: no more than 12 W
- 128 MB Flash
- 256 MB RAM
- Power supply: PoE 48 V/56 V (IEEE 802.3af-2003)
- Operating temperature from -45 to +65 °C
- Ingress protection: IP55
- Installation on a pole/wall
- Dimensions (W x H x D): 125 × 227 × 49 mm
- Weight: 0.77 kg
1The number of channels and the value of the maximum output power will vary according to the rules of radio frequency regulation in your country.
2The maximum wireless data rate is defined according to IEEE 802.11 standards. The real bandwidth can be different. Conditions of the network, environment, the amount of traffic, building materials and constructions and network service data can decrease the real bandwidth. The environment can influence on the network coverage range.
Show all
Descriptions
Documentations
Operational lifetime of the ELTEX equipment
In development
1
Pre-production
2
Mass production
3
Mass production is over
4
Sold out
5
Support is over
6
During the warranty period the manufacturer ensures technical support and free-of-charge repair at the Enterprise which is situated in Novosibirsk.
As part of the warranty service, technical support is provided on the first-in first-out principle.
The priority support packages of 8/5 and 27/7 types are subjects to additional charges.
News
