Wireless access point WEP-2L
Mass production
- Dual band access point with support for 802.11ac
- Radio interface with MIMO 2x2 support
- PoE+ power supply (IEEE 802.3at)
- Up to 40 clients per an access point
- Up-to-date authentication and encryption means
WEP-2L provides accessible, easy-to-use, high-performance and secure wireless network that combines numerous features and services required by corporate clients.
WEP-2L is a universal solution for organization of wireless networks in highly crowded areas and high traffic environments (Offices, state institutions, conference halls, laboratories, hotels, etc.).
Scalability
The WEP-2L wireless access point is an up-to-date flexible solution that allows you to change the network coverage in order to increase the quantity of serviced mobile devices. Due to high performance hardware platform, scalability features and easy-to-use interface , it is possible to set up IT infrastructure simply and fast.
Wireless connection
Due to support for IEEE 802.11n/ac standards the WEP-2L access point provides 300 Mbps (at 2.4 GHz) and 867 Mbps (at 5 GHz) data rates.
The use of MIMO technology and embedded omnidirectional antennas makes WEP-2L a universal solution for corporate networks construction.
Security
WEP-2L provides personal data protection and corporate environment security due to the support for modern authentication technologies. Particularly, it uses a dynamic key that is unique for each active user station.
Performance
High-performance processors are used in the devices in order to provide reliability and high data processing rates.
Power supply
The PoE+ technology makes the installation possible practically at any place regardless of the power supply location, thus allowing for cost economy on power cables and making the installation easier and faster.
Performance
High-performance processors are used in the devices in order to provide reliability and high data processing rates.
Power supply
The PoE+ technology makes the installation possible practically at any place regardless of the power supply location, thus allowing for cost economy on power cables and making the installation easier and faster.
Show all
Specifications
Documents and files
Warranty
Interfaces
- 1 port of 10/100/1000Base-T (RJ-45)
- Support for IEEE 802.11a/b/g/n/ac
- Data aggregation, including A-MPDU (Tx/Rx) and A-MSDU (Rx)
- WMM-based packet priorities and planning
- Dynamic frequency selection (DFS)
- Support for hidden SSID
- 8 virtual access points
- External access points detection
- Spectrum analyzer
- Automatic speed negotiation, duplex mode negotiation and MDI-MDI-X switch-over
- VLAN support (Access, Trunk, General)
- 802.1X authentication support
- DHCP client
- GRE support
- ACL support
- NTP support
- Syslog support
- Packet priorities and planning based on profiles
- Bandwidth limiting for each SSID
- Centralized autorization via RADIUS server (WPA/WPA2 Enterprise)
- WPA/WPA2 encryption
- Support for Captive Portal
- Remote management via Telnet, SSH
- CLI
- NETCONF
- WEB interface
- Frequency range 2402–2482 MHz, 5170–5835 MHZ
- DSSS, CCK, BPSK, QPSK, 16QAM, 64QAM, 256QAM modulations
- Support for MIMO 2х2
- Bandwidth:
- 20, 40 MHz for 2.4 GHz;
- 20, 40 and 80 MHz for 5 GHz.
- 802.11b/g/n: 1–13 (2402–2482 MHz)
- 802.11a/n/ac:
- 36–64 (5170–5320 MHz)
- 100–144 (5490–5720 MHz)
- 149–165 (5745–5835 MHz)
- 802.11a: up to 54 Mbps
- 802.11b: up to 11 Mbps
- 802.11g: up to 54 Mbps
- 802.11n: up to 300 Mbps
- 802.11ac: up to 867 Mbps
- 2.4 GHz: up to -98 dBm
- 5 GHz: up to -96 dBm
- 2.4 GHz: 20 dBm
- 5 GHz: 20 dBm
Physical specifications
- Maximum power consumption – 9 W
- 32 MB Flash
- 128 MB RAM
- Power supply:
- PoE+ 48V/54V (IEEE 802.3at-2009)
- Operating temperature from +50C to +400C
- Dimension (diameter x height): 200x40 mm
1The number of channels and the value of the maximum output power will vary according to the rules of radio frequency regulation in your country
2The maximum wireless data rate is defined according to IEEE 802.11n/ac standard. The real bandwidth can be different. Conditions of the network, environment , the amount of traffic, building materials and constructions and network service data can decrease the real bandwidth. The environment can influence on the network coverage range.
2The maximum wireless data rate is defined according to IEEE 802.11n/ac standard. The real bandwidth can be different. Conditions of the network, environment , the amount of traffic, building materials and constructions and network service data can decrease the real bandwidth. The environment can influence on the network coverage range.
Show all
Descriptions
Documentations
Operational lifetime of the ELTEX equipment
In development
1
Pre-production
2
Mass production
3
Mass production is over
4
Sold out
5
Support is over
6
During the warranty period the manufacturer ensures technical support and free-of-charge repair at the Enterprise which is situated in Novosibirsk.
As part of the warranty service, technical support is provided on the first-in first-out principle.
The priority support packages of 8/5 and 27/7 types are subjects to additional charges.
News
