Ru En
Designer and manufacturer of communication equipment
Russia (GMT +7)

Wireless access point WEP-1L

Mass production
Key features
  • Dual band access point with support for 802.11ac
  • Radio interface with MIMO 2x2 support
  • DC 5V power supply
  • Up to 20 clients per an access point
  • Up-to-date authentication and encryption means

Solution for enterprise
WEP-1L provides accessible, easy-to-use, high-performance and secure wireless network that combines numerous features and services required by corporate clients.
WEP-1L is a universal solution for organization of wireless networks with small amount of users (offices, small branches of organizations, etc.).

Scalability
The WEP-1L wireless access point is an up-to-date flexible solution that allows you to change the network coverage in order to increase the quantity of serviced mobile devices. Due to high performance hardware platform, scalability features and easy-to-use interface, it is possible to set up IT infrastructure simply and fast.

Wireless connection
Due to support for IEEE 802.11n/ac standards the WEP-1L access point provides 300 Mbps (at 2.4 GHz) and 867 Mbps (at 5 GHz) data rates.
The use of MIMO technology and embedded omnidirectional antennas makes WEP-1L a universal solution for corporate networks construction.

Security
WEP-1L provides personal data protection and corporate environment security due to the support for modern authentication technologies. Particularly, it uses a dynamic key that is unique for each active user station.

Performance
High-performance processors are used in the devices in order to provide reliability and high data processing rates.

Specifications
Documents and files
Warranty

Interfaces
  • 1 port of 10/100/1000Base-T (RJ-45)
WLAN capabilities
  • Support for IEEE 802.11a/b/g/n/ac
  • Data aggregation, including A-MPDU (Tx/Rx) and A-MSDU (Rx)
  • WMM-based packet priorities and planning
  • Dynamic frequency selection (DFS)
  • Support for hidden SSID
  • 8 virtual access points
  • External access points detection
Network features
  • Automatic speed negotiation, duplex mode negotiation and MDI-MDI-X switch-over
  • VLAN support (Access, Trunk, General)
  • 802.1X authentication support
  • DHCP client
  • GRE support
  • ACL support
  • NTP support
  • Syslog support
QoS functions
  • Packet priorities and planning based on profiles
  • Bandwidth limiting for each SSID

Security
  • Centralized autorization via RADIUS server (WPA/WPA2 Enterprise)
  • WPA/WPA2 encryption
  • Support for Captive Portal
Configuration
  • Remote management via Telnet, SSH
  • CLI
  • NETCONF
  • WEB interface
Wireless interface specifications
  • Frequency range 2402–2482 MHz, 5170–5835 MHz
  • DSSS, CCK, BPSK, QPSK, 16QAM, 64QAM, 256QAM modulations
  • Support for MIMO 2х2
  • Bandwidth:
    • 20, 40 MHz for 2.4 GHz;
    • 20, 40 and 80 MHz for 5 GHz.
Operating channels1
  • 802.11b/g/n: 1–13 (2402–2482 MHz)
  • 802.11a/n/ac:
    • 36–64 (5170–5320 MHz)
    • 100–144 (5490–5720 MHz)
    • 149–165 (5745–5835 MHz)
Data rate2
  • 802.11a: up to 54 Mbps
  • 802.11b: up to 11 Mbps
  • 802.11g: up to 54 Mbps
  • 802.11n: up to 300 Mbps
  • 802.11ac: up to 867 Mbps
Receiver sensitivity
  • 2.4 GHz: up to -98 dBm
  • 5 GHz: up to -96 dBm
Maximum power of the transmitter1
  • 2.4 GHz: 18 dBm
  • 5 GHz: 20 dBm

Physical specifications
  • Maximum power consumption – 7 W
  • 32 MB Flash
  • 128 MB RAM
  • Power supply:
    • 5.3V DC, 2A power adapter
  • Operating temperature from +50C to +400C
  • Dimension (diameter x height): 100x23 mm


The number of channels and the value of the maximum output power will vary according to the rules of radio frequency regulation in your country

The maximum wireless data rate is defined according to IEEE 802.11n/ac standard. The real bandwidth can be different. Conditions of the network, environment , the amount of traffic, building materials and constructions and network service data can decrease the real bandwidth. The environment 

Operational lifetime of the ELTEX equipment
In development
1
Pre-production
2
Mass production
3
Mass production is over
4
Sold out
5
Support is over
6
Regardless of the operational lifetime stage, Eltex provides a 12 months warranty on all its telecommunication equipment.
During the warranty period the manufacturer ensures technical support and free-of-charge repair at the Enterprise which is situated in Novosibirsk.
As part of the warranty service, technical support is provided on the first-in first-out principle.
The priority support packages of 8/5 and 27/7 types are subjects to additional charges.

Помогите сделать
сайт лучше