New
Wireless access point WEP-30L
Mass production
Key benefits
WEP-30L is a new Wi-Fi 6 generation access point that will provide maximum bandwidth and stable wireless connection for all connected devices. With high speed, low latency, energy efficiency, increased bandwidth and extended range, the new access points of 802.11ax standard support a broader set of applications that require maximum performance in demanding enterprise environments. The new access points will be able to provide many additional services compared to previous Wi-Fi standards.
WEP-30L is a universal solution for organization of wireless networks in highly crowded areas and high traffic environ-ments (offices, state institutions, conference halls, laboratories, hotels etc.).
Scalability
The WEP-30L is an up-to-date flexible solution that allows you to change the network coverage in order to increase the quantity of serviced mobile devices. Due to high-performance hardware platform, scalability features and easy-to-use interface, it is possible to set up IT infrastructure simply and fast.
Wireless connection
Due to support for IEEE 802.11ax standard the WEP-30L access point provides 574 Mbps (2.4 GHz) + 1201 Mbps (5 GHz) data rates. The use of MU-MIMO technology and built-in omnidirectional antennas makes WEP-30L a universal solution for corporate networks construction.
Security
For the corporate environment, modern WPA3 authentication and encryption technologies are supported, which provide personal data protection and environment security. The new generation access points meet the highest security and compatibility requirements for earlier versions of the 802.11 standard.
Performance
The high-performance processors are used in the devices in order to provide reliability and high data processing rates.
Power supply
The PoE technology makes installation of the equipment possible virtually everywhere, regardless of the power supply location. The use of PoE technology reduces total cost by discarding power cables and makes installation easier and faster.
- Dual band access point
- Support for 802.11ax
- Radio interface with MU-MIMO 2x2 support
- PoE power supply (IEEE 802.3af-2003)
- Up-to-date authentication and encryption means
WEP-30L is a new Wi-Fi 6 generation access point that will provide maximum bandwidth and stable wireless connection for all connected devices. With high speed, low latency, energy efficiency, increased bandwidth and extended range, the new access points of 802.11ax standard support a broader set of applications that require maximum performance in demanding enterprise environments. The new access points will be able to provide many additional services compared to previous Wi-Fi standards.
WEP-30L is a universal solution for organization of wireless networks in highly crowded areas and high traffic environ-ments (offices, state institutions, conference halls, laboratories, hotels etc.).
Scalability
The WEP-30L is an up-to-date flexible solution that allows you to change the network coverage in order to increase the quantity of serviced mobile devices. Due to high-performance hardware platform, scalability features and easy-to-use interface, it is possible to set up IT infrastructure simply and fast.
Wireless connection
Due to support for IEEE 802.11ax standard the WEP-30L access point provides 574 Mbps (2.4 GHz) + 1201 Mbps (5 GHz) data rates. The use of MU-MIMO technology and built-in omnidirectional antennas makes WEP-30L a universal solution for corporate networks construction.
Security
For the corporate environment, modern WPA3 authentication and encryption technologies are supported, which provide personal data protection and environment security. The new generation access points meet the highest security and compatibility requirements for earlier versions of the 802.11 standard.
Performance
The high-performance processors are used in the devices in order to provide reliability and high data processing rates.
Power supply
The PoE technology makes installation of the equipment possible virtually everywhere, regardless of the power supply location. The use of PoE technology reduces total cost by discarding power cables and makes installation easier and faster.
Show all
Specifications
Documents and files
Warranty
Interfaces
CE marked:
1The number of channels and the value of the maximum output power will vary according to the rules of radio frequency regulation in your country.
2The maximum wireless data rate is defined according to IEEE 802.11 standard. The real bandwidth can be different. Conditions of the network, environment, the amount of traffic, building materials and constructions and network service data can decrease the real bandwidth. The environment can influence on the network coverage range.
- 1 port of 10/100/1000/2500BASE-T (RJ-45) with PoE support
- Wi-Fi 2.4 GHz IEEE 802.11b/g/n/ax
- Wi-Fi 5 GHz IEEE 802.11a/n/ac/ax
- Support for IEEE 802.11a/b/g/n/ac/ax
- Support for roaming IEEE 802.11r/k/v
- Data aggregation, including A-MPDU (Tx/Rx) and A-MSDU (Rx)
- WMM-based packet priorities and planning
- Dynamic frequency selection (DFS)
- Support for hidden SSID
- 14 virtual access points
- External access points detection
- Spectrum analyzer
- WDS
- APSD
- Automatic speed negotiation, duplex mode negotiation and MDI-MDI-X switch-over
- VLAN support (Access, Trunk, General)
- DHCP client
- GRE
- Transmission of subscriber traffic outside of tunnels
- ACL
- NTP
- Syslog
- IPv6
- LLDP
- Packet priorities and planning based on profiles
- Bandwidth limiting for each SSID
- Remote management via Telnet, SSH
- CLI
- NETCONF
- Web interface
- SNMP
CE marked:
- EN IEC 62311:2020
- EN IEC 62368-1:2020+A11:2020
- EN 301 489-1 V2.2.3
- EN 301 489-3 V2.1.1
- EN 301 489-17 V3.2.4
- EN 55032:2015+A1:2020
- EN 55035:2017+A11:2020
- EN IEC 61000-3-2:2019+A1:2021
- EN 61000-3-3:2013+A2:2021
- EN 300 328 V2.2.2
- EN 301 893 V2.1.1
- EN 300 440 V2.2.1
- Centralized autorization via RADIUS server (802.1X WPA/WPA2/WPA3 Enterprise)
- WPA/WPA2/WPA3/OWE encryption
- Captive Portal
- Authorization via RADIUS server when logging into the device
- Frequency range 2400–2483.5 MHz, 5150–5350 MHz, 5470–5850 MHz
- BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM modulations
- Built-in omnidirectional antennas
- Support for MU-MIMO 2x2
- Support for OFDMA
-
Bandwidth:
- 20, 40 MHz for 2.4 GHz
- 20, 40 and 80 MHz for 5 GHz
- 802.11b/g/n/ax: 1–13 (2402–2482 MHz)
-
802.11a/n/ac/ax:
- 36–64 (5170–5330 MHz)
- 100–144 (5490–5730 MHz)
- 149–165 (5735–5835 MHz)
- 2.4 GHz, 802.11ax: 574 Mbps
- 5 GHz, 802.11ax: 1201 Mbps
- 2.4 GHz: 20 dBm
- 5 GHz: 20 dBm
- 2.4 GHz: ~3 dBi
- 5 GHz: ~3 dBi
- 2.4 GHz: up to -95 dBm
- 5 GHz: up to -95 dBm
- Power consumption: no more than 12.95 W
- 128 MB SPI-NAND Flash
- 256 MB DDR3 RAM
- Power supply: PoE 48 V/56 V (IEEE 802.3af-2003)
- Operating temperature from +5 °C to +40 °C
- Dimension (diameter × height): 230 × 56 mm
- Weight: 0.5 kg
1The number of channels and the value of the maximum output power will vary according to the rules of radio frequency regulation in your country.
2The maximum wireless data rate is defined according to IEEE 802.11 standard. The real bandwidth can be different. Conditions of the network, environment, the amount of traffic, building materials and constructions and network service data can decrease the real bandwidth. The environment can influence on the network coverage range.
Show all
Descriptions
Software
Documentations
Certificates
Operational lifetime of the ELTEX equipment
In development
1
Pre-production
2
Mass production
3
Mass production is over
4
Sold out
5
Support is over
6
During the warranty period the manufacturer ensures technical support and free-of-charge repair at the Enterprise which is situated in Novosibirsk.
As part of the warranty service, technical support is provided on the first-in first-out principle.
The priority support packages of 8/5 and 27/7 types are subjects to additional charges.
News
