Subscriber router RG-5520G-Wax
- Wi-Fi 6:
- 802.11ax
- Frequency range:
- 2.4/5 GHz
- MU-MIMO:
- 2x2
- Interfaces:
- 1x2.5G (WAN)
New
Description
RG-5520G-Wax - dual band Wi-Fi router with GbE WAN port and 2.5 GbE WAN port with a high-performance dual core processor. The device supports the 802.11ax standard which simultaneously works with two streams delivering rates of up to 1.201 Gbps on the 5 GHz band. The MU MIMO technology makes the device a universal solution for enterprise networking.
Simplified administration
Centralized configuration uploading, intelligent update of firmware and collection of data on the statuses of subscriber devices are implemented in the ELTEX.ACS system based on theTR-069 protocol. The system provides simplicity of ELTEX CPE management and decreases operating expenses (OPEX) for network maintenance.
Customization
The following means of customization are available: case color changing, logo placement, package extension and other options on request.
Advantages of EasyMesh technology
- Network intelligence: a self-organizing and self-optimizing network collects information and responds to network conditions
- for maximum performance
- Efficient load balancing: allows devices to switch to a better connection and avoid interference
- Scalability: allows adding multi-vendor Wi-Fi EasyMesh access points
Advanced warranty and support packages
Extend basic package with additional paid services
Learn more
Specifications
- MU-MIMO:
- 2x2
- Customization
- TR-069
Features and capabilities
For full specifications and manuals see Documents and files section below
Main technical parameters:
RAM
256 MB
Flash
128 MB
Interfaces:
WAN
1x2.5G
LAN
4x1G
Wi-Fi
2.4 GHz b/g/n/ax
5 GHz a/n/ac/ax
USB 2.0
1
Wireless interface parameters:
5 GHz: up to -95 dBm
Frequency range:
2402–2482 MHz
5170–5330 MHz
5650–5835 MHz
MIMO:
2.4 GHz: 2x2 MU MIMO
5 GHz 2x2 MU MIMO
Maximum power of the transmitter:
2.4 GHz: 21 dBm
5 GHz: 22 dBm
Antenna gain:
2.4 GHz: 2x3 dBi
5 GHz: 2x4 dBi
Receiver sensitivity:
2.4 GHz: up to -94 dBm
Data rate:
2.4 GHz: up to 573.5 Mbps (HE40_MCS11)
5 GHz: up to 1201 Mbps (HE80_MCS11)
Free
Basic warranty
Up to 5 years
Extended warranty
Hit
Free
First in, first out
Monday to Friday (GMT +7)
Priority support
Monday to Friday (GMT +7)
Priority support
Monday to Friday (GMT +5)
Support
Hit
Documents and files
Firmware Version 1.6.0 (Issue date: 25-07-2025)
GZ, 25.6 Mb
Firmware Version 1.5.0 (Issue date: 16-05-2025)
GZ, 24.9 Mb
Firmware Version 1.4.1 (Issue date: 16-05-2025)
GZ, 25.7 Mb
Firmware Version 1.4.0 (Issue date: 16-05-2025)
GZ, 25.7 Mb
Firmware Version 1.3.1 (Issue date: 16-05-2025)
GZ, 21.9 Mb
Firmware updates
Firmware Version 1.6.0
List of changes in the system part:
- Added support for AmneziaWG
- Added validation of configuration file size for WireGuard and AmneziaWG
- Improved port forwarding functionality
- Added saving of gateway state for established OpenVPN tunnel
- Enabled STP functionality by default
- Prevented disabling of STP functionality when EasyMesh is enabled
- Updated BusyBox to version 1.37
- Replaced FTP client with ProFTPD
- Fixed DDNS operation (IPv6)
- Fixed UPnP operation when changing LAN subnet
- Fixed UPnP operation in bridge mode
- Fixed USB storage operation in bridge mode
- Fixed WAN ACL for Telnet
- Fixed Dual Image functionality
- Fixed firmware file upload validation
- Fixed DDNS status display
- Fixed Cyrillic character display for the FTP server
- Fixed WireGuard connection drop issue
- Fixed resolving domain names with .loc when no network connection is available
List of changes in the web interface:
- Added configuration for PPTP client in simple mode
- Added configuration for L2TP client in simple mode
- Added configuration for WireGuard client in simple mode
- Added configuration for OpenVPN client in simple mode
- Added configuration for Shadowsocks client in simple mode
- Added VPN block to the "Status" page in simple mode
- Added icon for the "VPN Configuration" page in simple mode
- Added validation of configuration file size for WireGuard and AmneziaWG
- Added modem connection configuration to the setup wizard
- Added L2TP connection configuration to the setup wizard
- Added PPTP connection configuration to the setup wizard
- Added RSSI and uptime info to the wireless clients table
- Added PPTP field validation in the wizard
- Added password visibility toggle on the "Dynamic DNS" page
- Added feedback during configuration file upload for WireGuard and AmneziaWG
- Added logging of settings application in web interface pages
- Added DDNS status display in the web interface
- Added enabling STP automatically when EasyMesh is turned on
- Added default port value for Shadowsocks if not specified
- Added "Apply" button to apply WireGuard configuration
- Adjusted localization for VPN tunnels in simple mode
- Unified QR code generation for Wi-Fi in simple and advanced modes
- Updated IPv4 address input form
- Updated MAC address input form
- Updated help block on the "IPv4/IPv6 Network Settings" page
- Updated help block on the "Time Settings" page
- Fixed bootloader version in the web interface
- Updated WireGuard help block
- Removed "Limiting the Wi-Fi Clients Number" setting in client mode
- Removed horizontal scroll bar on the "WAN" page in simple mode
- Fixed "VLAN ID" field validation in the wizard
- Fixed "Keyword" field validation on the "URL Blocking" page
- Fixed "Syslog server" field validation on the "System Log" page
- Fixed "VPN server" field validation on the "VPN" page
- Fixed prefix length field validation on the "QoS Classification" page
- Fixed issue on the "Operation Mode" page
- Fixed issue when creating WAN interface with an IPv6 address
- Fixed AP settings application in advanced security settings
- Fixed issue when disabling access point in advanced Wi-Fi settings
- Fixed layout on the "Virtual APs" page with partially collapsed browser window
- Fixed ARP table tab crash
- Fixed wireless clients table display on mobile browsers
- Fixed AP enable/disable display in simple mode
- Fixed configuration file display in simple mode
- Fixed icon overlapping text on the "Wi-Fi" page in simple mode
- Fixed creation of DHCP static lease rules
- Fixed behavior on failed authorization in web interface via IPv6
- Fixed password display under QR code in the wizard
- Fixed interface display when configuring traffic shaping rule
- Fixed SSID output in wireless scan results
- Fixed memory usage calculation method
- Fixed edit mode on "ACL" pages
Previous versions
Firmware Version 1.5.0
List of changes in the system part:
- Added support for the OpenVPN client
- Added support for the ShadowSocks client
- Added support for the mDNS protocol
- Added support for the LLMNR protocol
- Added support for LDPC for Wi-Fi
- Implemented compatibility with RG-5440G-Wac, RG-1440G-Wac, RR-10, RR-11 devices in EasyMesh
- Improved DNS server operation
- Added functionality for emergency firmware recovery Failsafe UI
- Added tcpdump to flash memory
- Disabled boa web server
- Enabled IGMP Proxy in default settings
- Implemented disabling DNS trap when assigning a static IP address to the bridge
- Added functionality for monitoring the availability status of WireGuard servers
- Fixed the problem of disconnecting in games
- Fixed memory leaks in the DHCP server operation
- Fixed memory leaks in the DNS server operation
- Fixed memory leaks in the CWMP client operation
- Fixed file descriptors leaks when running scheduled indication
- Fixed the problem with setting the DNS server address for the IPoE interface upon booting
- Fixed the problem with setting the DNS server address for the PPPoE connection when stepping through the setup wizard
- Fixed the display of DNS server addresses when creating a tagged PPPoE connection
- Fixed DNS operation in the NTP client
- Fixed the algorithm for resolving the domain name of VPN servers
- Fixed the algorithm for resolving the ACS domain name
- Fixed DDNS operation
- Fixed the problem of excluding the EasyMesh agent from the topology when changing the name
- Fixed the display of the firmware version in the system log when updating the firmware
- Fixed PPTP connection up after Ethernet cable reconnection
- Fixed MLD Snooping operation after reboot
- Fixed modem connection in conjunction with static IP on WAN
- Fixed IPv4 and IPv6 ACL configuration
- Fixed ACL for WireGuard and PPTP when creating rules specifying a VPN interface
- Fixed ACL for VPN when deleting a VPN interface
- Fixed HTTP connection over WAN
- Fixed WireGuard configuration file validation
- Fixed Status LED operation in bridge mode
- Fixed incorrect application of IPv4 static route metrics
- Fixed the problem with WAN not working after reboot
- Fixed Wi-Fi schedule functionality
- Fixed indicator management functionality
- Fixed VPN operation when switching between USB and Ethernet connections
- Fixed PPTP and L2TP clients operation
- Fixed operation of the Multicast VLAN ID functionality
- Fixed operation of the NAT Loopback functionality with wireless clients
- Fixed operation of the NAT Loopback functionality with a static IP address on the WAN
- Fixed operation of the NAT Loopback functionality when creating a port forwarding rule
List of changes in the web interface:
- Redesigned page "Dynamic DNS"
- Redesigned page "RIP"
- Redesigned page "IP Passthrough"
- Redesigned page "QoS Policy"
- Redesigned page "QoS Classification"
- Redesigned page "Traffic shaping"
- Redesigned page "Domain blocking"
- Redesigned page "IPv4 routing"
- Redesigned page "IPv6 routing"
- Redesigned page "WPS"
- Redesigned page "Wi-Fi Access Control"
- Changed display of the VPN list on the page "VPN"
- Added PeerPersistentKeepalive parameter setting on the "VPN" page for WireGuard
- Renamed Wi-Fi standards on the "Basic Settings" and "Virtual APs" pages
- Changed UPnP server announcement parameters
- Added a help block for the "Wi-Fi Schedule" page
- Returned a hint for identical settings for the 2.4 and 5 GHz bands to the wizard
- Changed the appearance of the WAN connection creation icon
- Removed the ability to specify the "Any" interface on the "Virtual Servers" page
- Implemented an ARP table update
- Added a help block for the "Jumbo frame" page
- Added QR code generation for an open Wi-Fi access point on the "Basic Settings" page
- Improved hints on the "Basic Settings" and "Advanced Security Settings" pages in the web interface
- Moved the "Jumbo Frame" page in the web interface from "LAN" to "Advanced"
- Deleted the ability to select incoming traffic shaping
- Fixed freezing on the "Wi-Fi Air Scanning" page when connecting a wireless client
- Fixed freezing of the web interface when selecting the connection type in the wizard
- Fixed localization for the VPN connection card in the web interface
- Fixed validation on several pages in the web interface
- Fixed layout in the simplified mode menu of the web interface
- Fixed description of the hint on the "Samba" page
- Fixed localization error on the "STP" page
- Fixed page redirection when configuring bridge mode in the wizard
- Fixed mechanism for deleting and editing port forwarding and UPnP rules
- Fixed validation when configuring static IPv4 and IPv6 routes
- Fixed display of Wi-Fi operating mode on the "Status" page in the web interface
- Fixed display of the channel number for 2.4 GHz on the "Wi-Fi Air Scan" page
- Excluded validation for the "Shared Key" field during manual WireGuard setup
- Fixed display of DNS servers in the web interface
- Fixed validation of IP addresses when creating and editing WAN
- Fixed validation of IP and MAC address input fields
- Fixed an error with displaying the "Samba" page in the web interface when connecting a 4G modem
- Fixed redirect during manual setup in the wizard
- Fixed freezing of the web interface when switching between access points on the "Status" page
- Fixed validations of the "Shared Key" and "Allowed Addresses" fields on the "VPN" page for WireGuard
- Fixed reinitialization of VPN tunnels after applying VPN settings
- Fixed deletion of port forwarding rules after deleting a VPN interface
- Fixed display of the footer in the web interface
- Fixed redirect to the wizard when the device is not configured
- Fixed location of the button for deleting an alternative DNS server for WAN
- Fixed the ability to configure IGMP Proxy and MLD Proxy depending on the IP protocol on WAN
- Fixed the help block for the "LAN" page
- Fixed the problem with the absense of reboot upon firmware update
Request for design materials
You can request design files (3D models in .step format or device drawings in .dwg format). Our Design department will prepare the needed files for you.