MPLS router ME6008
- Performance:
- up to 19.2 Tbps
- Bandwidth per slot
- up to 2.4 Tbps
- Interface cards:
- up to 8 pieces per chassis
Description
ME6008 routers are multifunctional devices with a high port density intended for use in provider networks as aggregation and MPLS/network edge routers. This solution can be used to organize operator’s points of presence when providing data services for large customers with high reliability requirements.
ME6008 routers support wide range of MPLS switching, routing, redundancy mechanisms: MPLS Layer3 VPN, VPLS (Kompella/Martini), VPWS with pseudowire backup capabilities, Multicast-traffic routing with support for PIM-SM/PIM-SSM/MSDP/Anycast PIM/NG-MVPN protocols, as well as extensive QoS capabilities. This set of functions allows using devices as network edge routers for termination of client services.
ME6008 modular architecture provides flexible scaling and the ability to create hardware configuration that meets various requirements both in terms of bandwidth and types of network interfaces.
The router modules are instaled into standard 19" 15U eurorack. The chassis has 2 slots for routing and management modules (RCC), 4 slots for switch fabric (FC) modules, and 8 slots for line modules (LC).
Fault tolerance of the device is ensured by redundant power supply (the chassis is equipped with two -48V DC power inputs and distributed power supply diagram) and by redundant fan modules.All redundant units including switch and management cards, line cards, and fan modules are hot-swappable.
Specifications
- Performance:
- up to 19.2 Tbps
- Switching Factory Modules:
- 4,8 Tbps
- Interface cards:
- up to 8 pieces per chassis
- MPLS Protocols:
- LDP, RSVP-TE
- MPLS services:
- L3VPN, VPLS, VPWS
- Multicast:
- PIM-SM, PIM-SSM, IGMP, NG-MVPN
- Routing:
- PIM, OSPF, IS-IS, BGP, BFD, VRF
- Power supply:
- Two 36-72 V DC power inputs
.png)
.png)
.png)
.png)
.png)
 (1).png)
 (1).png)
.png)
 (1).png)
 (1).png)
 (1).png)
 (1).png)
