New

ONT NTU-SFP-200

Mass production

Data transfer rate up to 980 Mbit/s
Compatible with MES switches, TAU-72.IP and TAU-32M.IP
Up to 12 supported services
Support of FEC, encoding and DDMI interface

Description
NTU-SFP-200 is a high-performance subscriber terminal designed for communication with higher-level equipment of passive optical networks and providing broadband access services to the end user. Connection with GPON networks is implemented via PON interface. Connection of customer end equipment is implemented via SFP or SFP+ interface.
The number of services is restricted by OLT opportunities.
NTU-SFP-200 can operate in a bridge mode.

Interfaces

1 PON SC/APC port for connection to the operator’s network
1 Ethernet 1000BASE-X SFP port for connection to the network equipment

Scheme of use
Using this device you can provide the following schemes of traffic transfer from the switch:

transferring untagged traffic from a switch to a specific VLAN (802.1q) or VLAN stack (QinQ)
transferring tagged traffic from a switch in a predetermined VLAN transparently or using VLAN manipulation (802.1q tag replacement for another 802.1q tag or tag stack)
transferring tagged traffic from a switch in the range of VLAN encapsulation to a specific 802.1q tag (selective tunneling)
transferring all traffic from a switch with encapsulation to a specific 802.1q tag (conventional tunneling)

Show all

General parameters

Standards support:
- G.984.2 Class B+
- G.984.5
- FDA 21 CFR 1040.10 and 1040.11 IEC-60825 Class I
- SFF-8472
Maximum data transfer rate - 980 Mbps
Maximum frame size - 1992
Equipment compatibility - MES switches, TAU-72.IP, TAU-32M.IP
Optic parameters - complies with Class B+
Emitted power - 0.5 dBm
Receiver sensitivity - -28 dBm
Receiver overload threshold - -8 dBm
Management - OMCI
Size of MAC-address table - 4096
Number of supported services - up to 12
Number of registered IGMP-groups - 256
FEC support
Encoding support
DDMI interface support

Physical parameters

Power consumption - up to 3 W
Operating temperature range - from -40°С up to +85°С
Relative humidity - from 5 up to 95% without condensation
Dimensions (WxHxD) - 74.7х12.4х14 mm
Weight - 0.04 kg

Show all

Descriptions

Data Sheet

Downloads

Operational lifetime of the ELTEX equipment

Regardless of the operational lifetime stage, Eltex provides a 12 months warranty on all its telecommunication equipment.
During the warranty period the manufacturer ensures technical support and free-of-charge repair at the Enterprise which is situated in Novosibirsk.
As part of the warranty service, technical support is provided on the first-in first-out principle.
The priority support packages of 8/5 and 27/7 types are subjects to additional charges.