Go to Products
Назад

OLT LTX-8

Technology:
10G-PON
Performance:
300 Gbps
Interfaces:
8xXGS-PON, 4x100/40GE (QSFP28/QSFP+)
ONT:
2048/1024
New

Description

LTX series station equipment (OLT) is designed to provide broad band access over Passive Optical Networks (PON).

 

XGS-PON interfaces are used to connect an optical distribution network. Up to 128 optical subscriber terminals can be connected to each interface via a single fiber by the GPON standard and up to 256 subscriber terminals by the XGS-PON standard. The access to the operator's transport network is provided via 100 Gigabit uplink interfaces.

 

OLT LTX allows operators building scalable, last mile fault-tolerant networks that meet the highest safety standards.OLT manages subscriber devices, traffic switching and connection to the transport network. Broadband subscriber access using FTTH technology is the highest quality Triple Play service delivery option, as it provides high data transmission rates over long distances.

 

The main advantage of PON technology is the absence of electrically powered active nodes within the section from OLT to ONT, which significantly reduces the network operating cost. Furthermore, PON technology saves on cabling infra-structure by reducing the total length of the optical fiber, since only one fiber for a group of up to 128 subscribers (GPON standard) and up to 256 subscribers (XGS-PON standard) is used with in the section from the central node to the splitter.

 

OLT station terminals support two hot-swappable power modules with the ability to automatically switch to a redundant power unit.

Advanced warranty and support packages
Extend basic package with additional paid services
Learn more

Specifications

EMS
Centralized network equipment management system. Allows you to monitor the main parameters of devices and display emergency situations online 
EMS
Features and capabilities
For full specifications and manuals see Documents and files section below
Data sheet
Interfaces:
100GBASE-SR-4/LR4 (QSFP28)
4
XGS-PON
8
Port modes:
Duplex mode
100/40 Gbps for QSFP28/QSFP28+ Optical ports
25/10/1 Gbps for SFP28/SFP+/SFP optical ports
SFP PON Parameters:
Transmission medium
SMF-9/125, G.652 fiber optic cable
Splitting ratio
1:256 XGS-PON or up to 1:128 GPON
RSSI (Received Signal Strength Indication)
Yes
Compliance with ITU-T G.9807.1
Yes
Maximum transmission distance
20 km
Transmitter:
1577 nm
Data rate
9.953 Gbps
Average output power
2~5 dBm
Receiver:
1270 nm
Data rate
9,953 Gbps
Receiver sensitivity
-26 dBm
Switch:
Bandwidth
300 Gbps
MAC table
64К entries
VLAN table
4K (in compliance with 802.1Q)
Physical parameters:
Power supply
100–240 V AC, 50–60 Hz
36–72 V DC
Power consumption
No more than 101 W
Operating temperature
From -5 to +40 C
Relative humidity
Up to 80%
Dimensions
with installed power module: 430x43.6x451.2 mm, 19", 1U case
Additional features:
VLAN mirroring
Yes
MAC table
64K per switch, 8K per port
MAC address limiting
Yes
STP, RSTP, MSTP
Yes
ERPSv2
Yes
QoS
802.1p, WFQ, DSCP
Port isolation, port isolation within a VLAN
Yes
Unicast/multicast/broadcast traffic limiting
Yes
ACL Ipv4
Yes
QinQ in compliance with IEEE 802.1ad
Yes
Multicast groups
Up to 1024
IGMP Fast Leave
Yes
IGMP Proxy
Yes
IGMP Snooping
Yes
IGMP Querier
Yes
DHCPv4 Snooping
Yes
IP Source guard
Yes
DHCPv4 Relay Agent (opt.82, iphelper)
Yes
PPPoE Intermediate agent
Yes
LLDP (802.1ab)
Yes
Storm Control
Yes
Policy
Yes
Utilization by ONT services
Yes
OMCI Bridge
Yes
OMCI Rg
Yes
Management and monitoring:
RADIUS, TACACS+
Yes
Management and monitoring
CLI, SNMP, web
Access restriction
By password, IP address, privilege level
Several management interfaces
Yes

Support and warranty

Extend basic package with additional paid services

Documents and files

0 products to compare
Show more
Compare