New

Ethernet Access Switch MES2420B-24D

Mass production

Bandwidth up to 200 Gbps
Up to 24 ports of 2.5GBASE-T
Advanced L2 features
L3 switches
Support for Multicast (IGMP Snooping, MVR)
Advanced security functions (L2-L4 ACL, IP Source Guard, Dynamic ARP Inspection and etc.)

MES2420 series switches provide end users connection to networks of large enterprises, small and mid-sized businesses and service providers via 2.5G/10G interfaces.

Uninterruptible power
MES2420B-24D switches can be equipped with a rechargeable battery to ensure power supply in case of the 230 V primary power supply loss. The switches are equipped with a power supply unit which allows the battery to be charged when 230 V power is available. Power supply redundancy system makes it possible to monitor the state of the primary network and notify of a power type switching.

Show all

Interfaces

10/100/1000/2500BASE-T (RJ-45) - 24
1000BASE-X (SFP)/10GBASE-R (SFP+) - 4
Console port RS-232 (RJ-45) - 1

Performance

Bandwidth - 200 Gbps
Throughput for 64-byte packets - 148.80 MPPS
Buffer memory - 1.5 MB
RAM (DDR3) - 1 GB
ROM (SPI Flash) - 64 MB
MAC table - 16384
ARP table - 1000
VLAN table - 4094
L2 Multicast groups (IGMP Snooping) - 1023
L3 Multicast groups (IGMP proxy) - 512
SQinQ rules - 2048(ingress)/1024(egress)
MAC ACL rules - 509
IPv4/IPv6 ACL rules - 384/192
L3 IPv4 Unicast routes - 2048
L3 IPv6 Unicast routes - 512
VRRP routers - 32
L3 interfaces - 20 VLANs, up to 5 IPv4 addresses per VLAN, up to 512IРv6 GUAs for all VLANs in summary
Link Aggregation Groups (LAG) - 24 groups, up to 8 ports in one LAG
Quality of Service (QoS) - 8 egress queues per port
Jumbo frames - maximum packet size is 12288 bytes

Interface features

Head-of-line blocking (HOL) protection
Auto MDI/MDIX
Jumbo frames
Flow control (IEEE 802.3X)
Port mirroring (SPAN, RSPAN)

МAC table

Independent learning mode per VLAN
MAC Multicast Support
Configurable aging time of MAC addresses
Static MAC Entries
MAC change events monitoring per ports
MAC Flapping

VLAN features

Voice VLAN
IEEE 802.1Q
Q-in-Q
Selective Q-in-Q
GVRP
MAC-based VLAN
Protocol-based VLAN

L2 Multicast features

Multicast profiles
Static Multicast groups
IGMP Snooping v1,2,3
IGMP Snooping fast-leave
IGMP proxy-report
IGMP authorization via RADIUS
MLD Snooping v1,2
MLD Snooping fast-leave
IGMP Querier
MVR

L2 features

STP (Spanning Tree Protocol, IEEE 802.1d)
RSTP (Rapid Spanning Tree Protocol, IEEE 802.1w)
MSTP (Multiple Spanning Tree Protocol, IEEE 802.1s)
Rapid-PVST+
STP Root Guard
STP Loop Guard
STP BPDU Guard
BPDU Filtering
Spanning Tree Fast Link option
Layer 2 Protocol Tunneling (L2PT)
Loopback Detection (LBD)
Port isolation
Storm Control for different traffic types (broadcast, multicast, unknown unicast)
ERPS (G.8032v2)

L3 Multicast features

IGMP proxy (RFC 4605)
IGMP proxy fast-leave

L3 features

Static IPv4, IPv6 routes
Dynamic routing protocols RIPv1/2, OSPFv2/3
VRRP protocol

Link Aggregation functions

Static LAG
Dynamic LAG (LACP)
LAG Balancing Algorithm

Service functions

Virtual Cable Testing (VCT)
Optical Transceiver Diagnostics

IРv6

IPv6 Host
IPv4, IРv6 dual stack

Security functions

DHCP Snooping
DHCP Option 82
IP Source Guard
Dynamic ARP Inspection (Protection)
MAC-based authentication, Port Security, Static MAC entries
Port-based authentication IEEE 802.1x
Guest VLAN
DoS attacks prevention
Traffic segmentation
DHCP clients filtering
BPDU attacks prevention
PPPoE Intermediate agent
DHCPv6 Snooping
IPv6 Source Guard
IPv6 ND Inspection
IPv6 RA Guard

ACL (Access Control Lists)

L2-L3-L4 ACL (Access Control List)
IPv6 ACL
ACL based on:

Switch port
IEEE 802.1p priority
VLAN ID
EtherType
DSCP
IP protocol type
TCP/UDP port number
User Defined Bytes

Quality of Service (QoS) and rate limiting

Port rate limiting (shaping, policing)
IEEE 802.1p Class of Service (CoS)
Queue scheduling algorithms: Strict Priority/Weighted Round Robin (WRR)
ACL-based traffic classification
ACL-based CoS/DSCP mark assignment
CoS to DSCP remarking
DSCP to CoS remarking
ACL-based VLAN assignment

ОАМ

IEEE 802.3ah, Ethernet OAM
IEEE 802.3ah Unidirectional Link Detection (UDLD)

Main management functions

Download and upload of configuration file via TFTP/SFTP
Automated backup of configuration file via TFTP/SFTP
Simple Network Management Protocol (SNMP)
Command Line Interface (CLI)
Web interface
Syslog
SNTP (Simple Network Time Protocol)
Traceroute
LLDP (IEEE 802.1ab) + LLDP MED
Processing of management traffic with two IEEE 802.1Q headers
Authorization of entered commands using TACACS+ server
IPv4/IPv6 ACL support for device management
Switch access management — privilege levels for users
Management interface blocking
Local authentication
IP addresses filtering for SNMP
RADIUS, TACACS+ (Terminal Access Controller Access Control System) clients
SSH, Telnet client
Telnet, SSH server
Macrocommands
Input commands logging via TACACS+
DHCP autoprovision
DHCP Relay (IРv4 support)
DHCP Relay Option 82
DHCP server
PPPoE Circuit-ID tag
Flash File System
Debug commands
CPU traffic limiting
Password encryption
Ping (IPv4/IPv6 support)
IPv4/IPv6 static routes support
Support for multiple versions of configuration file

Monitoring functions

Interface statistics
CPU utilization monitoring per task and per queue
RAM usage monitoring
Temperature monitoring
TCAM monitoring

MIB/IETF

RFC 1065, 1066, 1155, 1156, 2578 MIB Structure
RFC 1212 Concise MIB Definitions
RFC 1213 MIB II
RFC 1215 MIB Traps Convention
RFC 1493, 4188 Bridge MIB
RFC 1157, 2571-2576 SNMP MIB
RFC 1901-1908, 3418, 3636, 1442, 2578 SNMPv2 MIB
RFC 2465 IPv6 MIB
RFC 2737 Entity MIB
RFC 4293 IPv6 SNMP Mgmt Interface MIB
Private MIB
RFC 1398, 1643, 1650, 2358, 2665, 3635 Ether-like MIB
RFC 2668 802.3 MAU MIB
RFC 2674, 4363 802.1p MIB
RFC 2233, 2863 IF MIB
RFC 2618 RADIUS Authentication Client MIB
RFC 4022 MIB для TCP
RFC 4113 MIB для UDP
RFC 3289 MIB для Diffserv
RFC 2620 RADIUS Accounting Client MIB
RFC 768 UDP
RFC 791 IP
RFC 792 ICMPv4
RFC 2463, 4443 ICMPv6
RFC 793 TCP
RFC 2474, 3260 Definition of the DS field in the IPv4 and IPv6 Headers
RFC 1321, 2284, 2865, 3580, 3748 Extensible Authentication Protocol (EAP)
RFC 2571, RFC 2572, RFC 2573, RFC 2574 SNMP
RFC 826 ARP
RFC 854 Telnet
IEC 61850

Physical specifications and environmental parameters

Power supply 100–240 V AC, 50–60 Hz
Maximum power consumption(for switches without PoE support) - 60 W
Input current - 1.0–0.3 A, 0.7–0.2 A (without battery)
Heat dissipation - 35 W
Hardware support for Dying Gasp - yes
Operating temperature - from -15 to +50 °С
Storage temperature - from -40 to +70 °С
Cooling - 4 fans
Operating humidity - no more than 80 %
Form factor - 19", 1U
Dimensions (W × H × D) - 430 × 44 × 243 mm
Weight - 3.48 kg

Show all

Descriptions

Data Sheet

Software

Firmware version 10.3.6.3 R0 (publication date: 17.09.2024)

MIB Files (publication date: 17.09.2024)

Downloads

Operational lifetime of the ELTEX equipment

Regardless of the operational lifetime stage, Eltex provides a 12 months warranty on all its telecommunication equipment.
During the warranty period the manufacturer ensures technical support and free-of-charge repair at the Enterprise which is situated in Novosibirsk.
As part of the warranty service, technical support is provided on the first-in first-out principle.
The priority support packages of 8/5 and 27/7 types are subjects to additional charges.