WLC-30
- Connecting access points:
- 150
- Interfaces:
- 4x1G, 2x10G SFP
- Power supply:
- AC
Description
WLC-30 are controllers for the stand-alone management of wireless networks for small- and medium-sized enterprises. The devices allow quick configuring of a Wi-Fi network and adding ELTEX access points of different performance and purpose to it. The controllers provide monitoring of all access points, analyze traffic statistics and session time, perform individual Wi-Fi settings. Enterprise user authorization with traffic encryption is performed by login/password.
Advanced warranty and support packages
Extend basic package with additional paid services
Learn more
Specifications
- Access points number:
- 150
- Maximum clients number:
- 5000
- Interfaces:
- 4x1G, 2x10G SFP
- Access points monitoring
- User authorization:
- WPA/WPA2/WPA3 (Personal/Enterprise)
- Security:
- Firewall/IPS/IDS
ECCM
Eltex Cloud Configuration Manager is a centralized system for network equipment management
Features and capabilities
For full specifications and manuals see Documents and files section below
Interfaces:
Ethernet 10/100/1000BASE-T (LAN/WAN)
4
10GBASE-R SFP+/1000BASE-X (LAN/WAN)
2
Console (RJ-45)
1
USB 3.0
1
USB 2.0
1
HDD slot
1
microSD card slot
1
System features:
Access points number
150
Maximum clients number
5000
VPN tunnels
250
Static routes
11К
Concurrent sessions
256К
VLAN support
Up to 4К active VLANs according to 802.1Q
BGP routes
2,5М
OSPF routes
300К
RIP routes
10К
MAC table
2К entries per bridge
FIB size
1,4М
VRF
32
Physical specifications :
RAM
4 GB DDR4
Flash memory
8 GB eMMC
Maximum power consumption
26 W
Power supply
100–264 V AC, 50–60 Hz
Operating temperature
From -10 to +45 °C
Storage temperature
From - 40 to +70 °C
Operating humidity
No more than 80%
Storage humidity
From 10 % to 95%
Dimensions
430х40х225 mm
Access points management:
WPA/WPA2/WPA3 Personal
Yes (WPA3 supported for WEP-3ax, WEP-3L, WEP-30L, WEP-30L-Z, WOP-30L, WOP-30LI, WOP-30LS APs)
WPA/WPA2/WPA3 Enterprise
Yes (WPA3 supported for WEP-3ax, WEP-3L, WEP-30L, WEP-30L-Z, WOP-30L, WOP-30LI, WOP-30LS APs)
OWE open network
Yes (Supported for WEP-3ax, WEP-30L, WEP-30L-Z, WOP-30L, WOP-30LS APs)
Collecting user account information to an external RADIUS server
Yes
IEEE 802.11r/k/v standard seamless roaming
Yes
Integration with external portals
Yes (Eltex-NAICE, WNAM Netams, Cisco ISE)
Automatic management of radio environment resources
Yes
Access point authorization by certificate
Yes
Supported access points:
WEP-1L
WEP-2L
WEP-3L
WEP-200L
WEP-30L
WEP-30L-Z
WEP-3ax
WEP-550K
WOP-2L
WOP-20L
WOP-30L
WOP-30LI
WOP-30LS
WOP-30L-EX
WEP-2ac
WEP-2ac Smart
WOP-2ac
WOP-2ac rev.B
WOP-2ac rev.C
Related products
Components, modules, and software options that are purchased additionally
Free
Basic warranty
Up to 5 years
Extended warranty
Hit
Free
First in, first out
Monday to Friday (GMT +7)
Priority support
Monday to Friday (GMT +7)
Priority support
Monday to Friday (GMT +5)
Support
Hit
Documents and files
wlc30-1.36.3-build15 (Issue date: 13-05-2026)
ZIP, 106 Mb
mibs-1.36.3 (Issue date: 13-05-2026)
ZIP, 482 Kb
Firmware updates
Version 1.36.3
Revisions:
- Monitoring and management:
- WEB:
- UI redesign
- Monitoring
- Added display of the 6 GHz interface in AirTune data within AP
- Added power source information to the detailed AP information
- Added filters by fields: device name, band, RSSI, connection quality and IEEE 802.11 mode on the client monitoring page
- Configuration
- Added setting for signal power limits to general radio profiles and individual AP settings (used for automatic optimization by the AirTune service)
- Added “DHCP to unicast” setting to the 2.4 and 5 GHz radio profiles
- The page with individual AP settings has been divided into sections
- Added “Role takeover” column for VRRP to the Bridge advanced settings table
- Added “Key format” settings for VRRP authentication to the Bridge settings
- Added VRRP priority setting for each cluster unit in the Bridge settings
- Added SSID setting on the “Individual AP Settings” page
- Added warning and automatic navigation to the problem parameter in the configuration application error
- Added sorting in the “AP Name” column on the “Clients” page
- WLC:
- Monitoring
- Added power source information to the show wlc ap <mac> detailed command output
- Wi-Fi users username is now sent to the Navigine service
- Added encryption type information to the show wlc clients <mac> detailed command output
- Added client authentication algorithm information to the show wlc clients <mac> detailed command output
- Added channel and frequency on which the client is connected to the show wlc clients <mac> detailed command output
- Added ckient VLAN to the show wlc clients command output
- Configuration
- Added service-hold command to configure the behavior of AP and SSID when communication with the controller is lost (available in the ap-profile and ssid-profile)
- Added the ability to configure DAS parameters on WEP-3ax
- The country-code parameter has been moved from ap-profile to radio-profile
- Added check-status-force command to actively check the upstream RADIUS server in the radius-server local -> upstream-server <name> block
- Added a rate-limiting setting for unknown unicast traffic
- Monitoring
- SNMP:
- OID eltWlcClientVlanId (OID .1.3.6.1.4.1.35265.1.224.1.3.3.4.1.53) is added to ELTEX-WLC-MIB for viewing the client’s VLAN
- OID eltWlcClientEncryptionCipher (OID .1.3.6.1.4.1.35265.1.224.1.3.3.4.1.54) is added to ELTEX-WLC-MIB for viewing the encryption type used by clients
- OID eltWlcClientEncryptionGroupCipher (OID .1.3.6.1.4.1.35265.1.224.1.3.3.4.1.55) is added to ELTEX-WLC-MIB for viewing the client authentication algorithm
- OID eltWlcClientFrequency (OID .1.3.6.1.4.1.35265.1.224.1.3.3.4.1.56) is added to ELTEX-WLC-MIB for viewing the frequency on which the client is connected
- OID eltWlcClientChannel (OID .1.3.6.1.4.1.35265.1.224.1.3.3.4.1.57) is added to ELTEX-WLC-MIB for viewing the channel on which the client is connected
- Added reauthenticated (5) and expired (6) values to OID eltWlcClientPortalAuthStatus (OID .1.3.6.1.4.1.35265.1.224.1.3.3.4.1.32) to display the portal authorization status
- OID eltWlcClientInfoByMacVlanId (OID .1.3.6.1.4.1.35265.1.224.1.3.3.7.1.52) is added to ELTEX-WLC-MIB for viewing clients VLAN
- OID eltWlcClientInfoByMacEncryptionCipher (OID .1.3.6.1.4.1.35265.1.224.1.3.3.7.1.53) is added to ELTEX-WLC-MIB for viewing the encryption type used by clients
- OID eltWlcClientInfoByMacEncryptionGroupCipher (OID .1.3.6.1.4.1.35265.1.224.1.3.3.7.1.54) is added to ELTEX-WLC-MIB for viewing the client authentication algorithm
- OID eltWlcClientInfoByMacFrequency (OID .1.3.6.1.4.1.35265.1.224.1.3.3.7.1.55) is added to ELTEX-WLC-MIB for viewing the frequency on which the client is connected
- OID eltWlcClientInfoByMacChannel (OID .1.3.6.1.4.1.35265.1.224.1.3.3.7.1.56) is added to ELTEX-WLC-MIB for viewing the channel on which the client is connected
- Added reauthenticated (5) and expired (6) values to OID eltWlcClientInfoByMacPortalAuthStatus (OID .1.3.6.1.4.1.35265.1.224.1.3.3.7.1.31) to display the portal authorization status
- WEB:
- Failover:
- Cluster
- Added the ability to configure the NAS IP in the softgre-conrtoller for each unit
- Cluster
- vWLC:
- Added the ability to specify a serial number during installation from an image
Fixed:
- Memory leak when redirecting CoA requests to the radius-server local
- Sorting order on the VLAN page in the web interface
- SLA test freezing when the availability status of the remote party changes
Previous versions
Version 1.36.2
Revisions:
- Support for WLC-3250, WLC-3350
- Added VMware Tools for vWLC
- Monitoring and management:
- WEB:
- Monitoring
- Added the remote hosts IP address to the web servers authorization log
- Added the ability to view a list of changes before applying the configuration
- Added “In Progress” time display to the detailed information for AP. The counter shows how many AP are in the “In Progress” status
- Added display of the 6 GHz radio interface (Wlan 2) for the WEP-550K
- Added a filter in the AP log for the “Lost” status
- Added a “Device Name” column on the “RRM Reports” tab
- Standardized the order of information displayed on client monitoring pages
- Added a notification about a scheduled device reboot
- Added the ability to reboot AP
- Configuration
- Added the “ARP Spoofing Protection” setting to SSID profiles to control ARP Inspection functionality
- Added the Bridge setting
- Added the 6 GHz radio profile setting in the “Radioprofiles” section
- Added the ability to configure passive scanning in the “Access Point Settings” section
- Added 6 GHz setting in the “AirTune Profiles” section
- Added a VAP traffic rate limit setting for WEP-2ac/WOP-2ac access points
- Added a traffic rate limit setting (broadcast, multicast) for WEP-3ax
- Monitoring
- WLC:
- Monitoring
- Added display of the reason for the last VAP reboot to the show wlc ap detailed command output
- Added saving of the VAP list upon controller reboot (status “Lost”)
- Optimized client output; removed duplicate entries during client roaming
- Added display of hostname in AirTune optimization reports
- Added Retry Rate display to the show wlc vap command output
- Optimized display of RSSI and SNR. In the tabular output of show wlc clients only the worst parameter values are displayed; in the detailed information, values are displayed for each antenna
- Splitted display of channel transmission/reception speed to transmission/reception speed and transmission/reception modulation
- Configuration
- Added the ability to configure DAS settings on the WEP-2L/WOP-20L/200L
- Added a setting to limit VAP traffic speed for the WEP-2ac/WOP-2ac
- Added a setting to limit traffic speed (broadcast, multicast) for WEP-3ax
- Added ip dhcp replication-mode command to the radio-profile settings to convert DHCP packets from broadcast to unicast
- Added arp-inspection command to the ssid-profile settings to control ARP inspection functionality
- Added renew wlc ap command to force the access point to reconnect
- Added a setting to enable active/passive checking of the upstream RADIUS server when operating in request forwarding mode
- Added the ability to use placeholders when customizing DHCP Option 82, into which the AP inserts the corresponding values
- Added 6 GHz radio profile setting
- Added navigine command block in the WLC section for integration with the Navigine service
- Added 6 GHz support in AirTune
- Monitoring
- SNMP:
- OID eltWlcApRebootReason (OID .1.3.6.1.4.1.35265.1.224.1.3.2.3.1.14) is added to ELTEX-WLC-MIB to view the reason for the last WLC reboot
- eltWlcClientInfoByMacTable (OID .1.3.6.1.4.1.35265.1.224.1.3.3.7) table is added to ELTEX-WLC-MIB to view information about clients connected to the WLC, indexed by MAC address
- OID eltWlcApVapRetryRate (OID .1.3.6.1.4.1.35265.1.224.1.3.2.6.1.14) is added to ELTEX-WLC-MIB to view the percentage of retransmitted packets relative to total traffic on the VAP
- OID eltWlcClientRssiInt (OID .1.3.6.1.4.1.35265.1.224.1.3.3.4.1.38) is added to ELTEX-WLC-MIB to view minimum RSSI values
- OID eltWlcClientSnrInt (OID .1.3.6.1.4.1.35265.1.224.1.3.3.4.1.39) is added to ELTEX-WLC-MIB to view client signal-to-noise ratios
- OID eltWlcClientRssiA1 (OID .1.3.6.1.4.1.35265.1.224.1.3.3.4.1.40) is added to ELTEX-WLC-MIB to view client RSSI values for 1st antenna
- OIDeltWlcClientRssiA2 (OID .1.3.6.1.4.1.35265.1.224.1.3.3.4.1.41) is added to ELTEX-WLC-MIB to view client RSSI values for 2nd antenna
- OIDeltWlcClientRssiA3 (OID .1.3.6.1.4.1.35265.1.224.1.3.3.4.1.42) is added to ELTEX-WLC-MIB to view client RSSI values for 3rd antenna
- OIDeltWlcClientRssiA4 (OID .1.3.6.1.4.1.35265.1.224.1.3.3.4.1.43) is added to ELTEX-WLC-MIB to view client RSSI values for 4th antenna
- OID eltWlcClientSnrA1 (OID .1.3.6.1.4.1.35265.1.224.1.3.3.4.1.44) is added to ELTEX-WLC-MIB to view client signal-to-noise ratio values for 1st antenna
- OID eltWlcClientSnrA2 (OID .1.3.6.1.4.1.35265.1.224.1.3.3.4.1.45) is added to ELTEX-WLC-MIB to view client signal-to-noise ratio values for 2nd antenna
- OID eltWlcClientSnrA3 (OID .1.3.6.1.4.1.35265.1.224.1.3.3.4.1.46) is added to ELTEX-WLC-MIB to view client signal-to-noise ratio values for 3rd antenna
- OID eltWlcClientSnrA4 (OID .1.3.6.1.4.1.35265.1.224.1.3.3.4.1.47) is added to ELTEX-WLC-MIB to view client signal-to-noise ratio values for 4th antenna
- OID eltWlcClientTxRateNumeric (OID .1.3.6.1.4.1.35265.1.224.1.3.3.4.1.48) is added to ELTEX-WLC-MIB to view transmit channel rates in Mbps
- OID eltWlcClientRxRateNumeric (OID .1.3.6.1.4.1.35265.1.224.1.3.3.4.1.49) is added to ELTEX-WLC-MIB to view receive channel rates in Mbps
- OID eltWlcClientTxRateModulation (OID .1.3.6.1.4.1.35265.1.224.1.3.3.4.1.50) is added to ELTEX-WLC-MIB to view transmit modulation
- OID eltWlcClientRxRateModulation (OID .1.3.6.1.4.1.35265.1.224.1.3.3.4.1.51) is added to ELTEX-WLC-MIB to view receive modulation
- OID eltWlcSsidCount6g (OID .1.3.6.1.4.1.35265.1.224.1.3.1.1.4) is added to ELTEX-WLC-MIB to view the number of SSIDs in the 6 GHz band
- OID eltWlcClientsCount6g (OID .1.3.6.1.4.1.35265.1.224.1.3.3.6) is added to ELTEX-WLC-MIB to view the number of clients in the 6 GHz band
- WEB:
- Failover
- Cluster:
- Increased maximum number of units in a cluster to 4
- Added ability to configure the NAS IP in the local radius-server for each unit
- Added ability to configure the NAS IP in subscriber-control for each unit
- Cluster:
Fixed:
- Spontaneous reboot of the WLC-15
- Auto-negotiation of the 1000BASE-X SFP interface speed on the WLC-15
- WLC-3200 reboots when load is switched to a standby controller with Firewall Failover configured
- Spontaneous change in PSU status on the WLC-3200
- Memory leak in RADIUS when proxying accounting packets
- Configuration application error when attempting to delete a location defined in an ap-entry
- Configuration application error when using a sub-interface for an OOB interface
- SNMP query for the number of WLC clients
- WLC information output when generating a tech-support archive
- MAC address processing in AirTune
- Error wlc_apstm <wlc_apstm(<PID>):alarm_send:270>
- Optimized web server performance when receiving data on AP/clients
Version 1.30.8
Revisions:
- Monitoring and management:
- CLI:
- Added the ability to configure ACLs for outbound traffic
- WEB:
- Monitoring
- Added ability to export AP lists to a .csv file
- Configuration
- Added WIDS configuration
- Added 802.11r roaming configuration between locations on the “General settings” page
- Added setting to the RADIUS profile to use the client MAC address as the authentication password when working with an external portal
- Added ability to configure multiple VLAs for a single SSID
- Added compatibility mode setting for iOS devices (captive-adaptive) to the AP settings profile
- Added setting to the portal profile to disable HTTP/HTTPS authentication when working with an external portal
- Monitoring
- WLC:
- Added support for saving the AirTune operational state upon restart
- Monitoring
- Added show wlc ap main-info command to view inventory information for the AP
- Added show wlc ap all command to view the general list of AP, which includes registered AP and those configured in the settings
- Added show radius-servers to view the status of the upstream server (external RADIUS server) in a configuration that proxies RADIUS requests
- Added display of devices configured in the settings but not connected to the controller (Pre-configured)
- Added display of uptime for devices with the Active status to the advanced device monitoring
- Changed clear wlc ap command on clear wlc ap all
- Added information about client's authentication method, including its status to the advanced client monitoring
- Added show wlc clients auth-method command to filter users by authentication methods and statuses
- Added show wlc clients auth-count command to view information about the number of users at different stages of authentication
- SNMP:
- Modified behavior of OID ifLastChange (OID .1.3.6.1.2.1.2.2.1.9) in FIB-MIB, indicates the time of the last change in the Admin/Link state of the interface
- eltWlcApAllInfoByMacTable (OID .1.3.6.1.4.1.35265.1.224.1.3.2.8) table is added to ELTEX-WLC-MIB to view a list of all AP (registered AP and those configured in the settings) sorted by MAC address
- OID eltWlcApActiveUptime (OID .1.3.6.1.4.1.35265.1.224.1.3.2.3.1.13) is added to ELTEX-WLC-MIB to view the uptime of the AP in the Active state
- OID eltWlcApInfoByMacActiveUpTime (OID .1.3.6.1.4.1.35265.1.224.1.3.2.7.1.12) is added to ELTEX-WLC-MIB to view the uptime of the AP in the Active state
- eltWlcRadiusServerTable (OID .1.3.6.1.4.1.35265.1.224.1.3.1.3) table is added to ELTEX-WLC-MIB to view the status of the upstream server (external RADIUS server) in a configuration with proxy RADIUS requests
- eltWlcClientsAuthCountTable (OID .1.3.6.1.4.1.35265.1.224.1.3.3.5) table is added to ELTEX-WLC-MIB to view the number of users at different stages of authentication
- OID eltWlcClientSummaryAuthInfo (OID .1.3.6.1.4.1.35265.1.224.1.3.3.4.1.29) is added to ELTEX-WLC-MIB to view the overall authentication status
- OID eltWlcClientEapMethod (OID .1.3.6.1.4.1.35265.1.224.1.3.3.4.1.30) is added to ELTEX-WLC-MIB to view the EAP method during Enterprise authorization
- OID eltWlcClientMacAuthStatus (OID .1.3.6.1.4.1.35265.1.224.1.3.3.4.1.31) is added to ELTEX-WLC-MIB to view the status of MAB authentication
- OID eltWlcClientPortalAuthStatus (OID .1.3.6.1.4.1.35265.1.224.1.3.3.4.1.32) is added to ELTEX-WLC-MIB to view the status of portal authentication
- OID eltWlcClientWlanAuthMethod (OID .1.3.6.1.4.1.35265.1.224.1.3.3.4.1.33) is added to ELTEX-WLC-MIB to view the authentication method based on the security mode of the SSID
- OID eltWlcClientWlanAuthStatus (OID .1.3.6.1.4.1.35265.1.224.1.3.3.4.1.34) is added to ELTEX-WLC-MIB to view the authentication status based on the security mode of the SSID
- OID eltWlcClientMacAuthUptime (OID .1.3.6.1.4.1.35265.1.224.1.3.3.4.1.35) is added to ELTEX-WLC-MIB to view the time from passing MAB authentication
- OID eltWlcClientWlanAuthUptime (OID .1.3.6.1.4.1.35265.1.224.1.3.3.4.1.36) is added to ELTEX-WLC-MIB to view the time from passing MAB authentication with the security mode of the SSID
- OID eltWlcClientPortalAuthUptime (OID .1.3.6.1.4.1.35265.1.224.1.3.3.4.1.37) is added to ELTEX-WLC-MIB to view the time from passing portal authentication
- eltexElmLicInfoUtilizationTable (OID .1.3.6.1.4.1.35265.61.1.1.3) table is added to ELTEX-ELM-LIC-MIB containing information of license usage
- OID eltexElmLicInfoUtilizationParamName (OID .1.3.6.1.4.1.35265.61.1.1.3.1.2) is added to ELTEX-ELM-LIC-MIB to view the name of the active license
- OID eltexElmLicInfoUtilizationParamValue (OID .1.3.6.1.4.1.35265.61.1.1.3.1.3) is added to ELTEX-ELM-LIC-MIB to view the number of active licenses
- eltEsrFwConnectionStatTable (OID .1.3.6.1.4.1.35265.1.147.2.5.1.1.1) table is added to ELTEX-ESR-FIREWALL-MIB to view the number of firewall connections by protocol
- CLI:
Fixed:
- Unstable results when measuring channel characteristics using UDP-Jitter tests in IP SLA
- Display of the L2loc parameter in the BRAS forwarding entry for Port-channel interfaces; the parameter was passed in HEX
- Display of the L2loc parameter in the BRAS forwarding entry when a location is specified on a physical interface/subinterface. If the parameter is specified, it is passed in the L2loc parameter
- Database migration during an inconsistent upgrade to the latest firmware version
- Cyclic sending of aggregated routes in BGP
- Removed sending of disabled ipv4-acl rules to AP
- Memory leak when syslog host is configured
- Memory leak when QoS is configured
- Obtaining BRAS VRRP status in a cluster configuration
- Increased size of the rootfs on ESR/WLC-15 to 600 MB
Version 1.30.6
Revisions:
- Monitoring and management:
- CLI:
- snmp-server enable traps wlc-wids command to enable sending SNMP traps for WIDS events
- Functionality of converting 43 DHCP options from ASCII to hex has been implemented (format dhcp option-43 in the debug section)
- WEB:
- UI interface has been improved
- Monitoring
- WIDS log
- Sorting of configuration files by date has been improved
- Displaying the hostname on AP monitoring pages
- Date format in filters in the “Event Log” section has been changed
- Displaying the utilization and interference parameters in AP radio interfaces monitoring
- Configuration
- RADIUS server settings section
- VLAN settings section
- The configuration for portal authorization on AP has been implemented
- ARP suppression configuration in the radio profile (not supported for WEP/WOP-2ac, WEP-3ax, WEP-550K)
- WLC:
- Support for WEP-550K, WEP-30L-NB, WOP-3L-EX AP
- Synchronization of WLC logs during redundancy
- Support for portal authorization with Eltex-NAICE (for WEP-30L/WEP-30L-NB/30L-Z and WOP-30L/30LI/30LS)
- Support for redirecting CoA requests to radius-server local for portal authorization
- Monitoring
- Displaying the utilization and interference parameters in extended AP monitoring
- Unified format for displaying AP firmware in the show wlc ap firmware command
- show wlc journal info command for viewing summary information about WLC logs
- Units of measurement for speed in the show wlc ap interfaces <mac> output
- Configuration
- disconnect-on-reject command in portal-profile to disconnect the user upon Reject from RADIUS during MAB authentication (supported for WEP-30L/WEP-30L-NB/30L-Z and WOP-30L/30LI/30LS)
- http-auth-disable command in portal-profile to disable portal interaction with the AP via HTTP/HTTPS during user authorization
- neighbor-scan command in ap-profile to configure passive scanning has been extended for WEP-200L, WOP-20L, and WEP-3ax
- captive-adaptive command in ap-profile to enable portal authorization compatibility mode for iOS devices
- redirect-url-format command in portal-profile to specify the format of the user's MAC address and the format of the NAS ID in the redirect address when configuring portal authorization
- description command for user in radius-server local
- Configuring url-acl-profile and ipv4-acl in ap-profile and portal-profile to configure domain and IP address lists on the AP. The lists are used for unauthorized portal users
- Block of commands in ap-profile for configuring DAS parameters on the AP
- Block of commands in radius-server local for configuring DAS parameters used when redirecting CoA requests
- Ability to add a location name (location=<AP_LOCATION>) to redirect-url-custom in portal-profile
- Ability to redirect AAA RADIUS requests for different SSID to different servers
- The default value for the load-balance command in airtune-profile has been changed from “enabled” to “disabled”
- SNMP:
- OID eltWlcApInfoByMacTable (1.3.6.1.4.1.35265.1.224.1.3.2.7) is added to ELTEX-WLC-MIB which contains information about the AP indexed by MAC address
- OID eltWlcRadioRxUtilization (OID .1.3.6.1.4.1.35265.1.224.1.3.2.4.1.14) is added to ELTEX-WLC-MIB to view the RX disposal on the AP
- OID eltWlcRadioTxUtilization (OID .1.3.6.1.4.1.35265.1.224.1.3.2.4.1.15) is added to ELTEX-WLC-MIB to view the disposal TXT on the AP
- OID eltWlcRadioApInterferenceRatio (OID .1.3.6.1.4.1.35265.1.224.1.3.2.4.1.17) is added to ELTEX-WLC-MIB to view interference between Wi-Fi devices that operate on close but not completely independent channels
- OID eltWlcRadioCoChannelInterference (OID .1.3.6.1.4.1.35265.1.224.1.3.2.4.1.18) is added to ELTEX-WLC-MIB to view interference between Wi-Fi devices that operate on the same channel
- OID eltWlcRadioNoiseLevel (OID .1.3.6.1.4.1.35265.1.224.1.3.2.4.1.19) is added to ELTEX-WLC-MIB to view the noise level on the radio channel
- OID eltWlcRadioPacketErrorRate (OID .1.3.6.1.4.1.35265.1.224.1.3.2.4.1.20) is added to ELTEX-WLC-MIB to view the percentage of packets corrupted due to interference, weak signal, or collisions
- WIDS ladders are added to ELTEX-WLC-MIB
- OID eltexEnvMemoryAvailable (OID .1.3.6.1.4.1.35265.38.40.40.11) is added to ELTEX-GENERIC-MIB to view available memory
- Syslog:
- match process-name web command to filter WEB server events
- CLI:
- Security:
- Licensing:
- Increased license lifetime when ELM is unavailable
- Licensing:
Fixed:
- Erroneous termination of the lic-mgr service
- Bootloaders are not updated when updating firmware via the WEB
- After deleting radio-5g-profile, APs switch to Cfg failed status
- In ldap-profile, it is not possible to set ldap-server via a domain name
- Not all AirTune sessions are displayed
Version 1.30.4
Revisions:
- Implemented synchronization of AP firmware in the backup scheme
- Monitoring and management:
- Added critlog directory to show tech-support command output
- WEB:
- Full audit of administrator actions in the WEB interface via TACACS+ / RADIUS
- Optimized operation of WEB server when operating with clients and AP
- Improved adaptation of the WEB interface to different screen resolution
- Monitoring
- Filtering on the "Access points" and "Clients" pages
- Pagination when displaying data on the "Access points", "Clients", "Event log" pages
- CPU load graph
- Client IP address on client monitoring pages
- "VLAN number" column in the virtual access points table
- "Range" column in the clients table
- Monitoring of the 802.11v parameter on the "Roaming data" page
- Client IP address changed check-box in the client log
- Unified pop-up windows and snack bars when operating with tables
- Configuration
- Portal authorization settings
- Ability to limit the traffic speed (clients, VAP, broadcast, multicast)
- Configuring the 82 DHCP option on AP in radio profile
- Configuring the 802.11v in the AirTune profile
- Configuring the "Country code" in the AP profile to comply with local restrictions on channels and transmitter power corresponding to the selected country
- Changed order of settings in the SSID profile
- Configuring the IEEE 802.11 n/ac, a/n/ac modes for 5 GHz radio interface in the individual AP settings
- WLC:
- wlc-journal storage command to transfer WLC logs to HDD
- Optimized AP connection speed
- Optimized AP connection stability
- Monitoring
- Display the "VLAN" in the show wlc ap vap command output
- Display the range in which the client operates in the show wlc clients command output
- Display the ap-location in the AP log(show wlc journal ap)
- Display the band in the AP log (show wlc journal client)
- Configuration
- country-code command in the ap-profile to comply with local restrictions on channels and transmitter power corresponding to the selected country
- The maximum size of WLC logs is limited to 90 days. When updating to 1.30.4 firmware version, the size of existing logs will be automatically reduced
- Configuring the MQTT positioning for WEP-1L, WEP-2L, WOP-2L, WEP-3L
- Configuring the WIDS/WIPS for WEP-200L and WOP-20L
- neighbour-scan command in the ap-profile for configuring passive scanning on WOP/WEP-30L, WEP-30L-Z, WOP-30LS, WOP-30LI
- show wlc statistics command block for displaying statistics on clients and AP events
- arp suppression command for configuring ARP conversion
- lldp-server command block in ap-profile/services for configuring LLDP
- lldp command block in ap-profile/trace for configuring LLDP logging
- Ability to add NAS IP to the redirect address when configuring portal authorization via RADIUS
- Processing of deauth-attack in WIDS
- load-balance roaming clients max/min commands in airtune-profile for configuring the maximum/minimum number of users during balancing
- 802.11r cross-location-roaming command in AirTune settings to enable 802.11r roaming between locations
- Syslog:
- syslog web-commands for logging actions on WEB
- logging wlc-events/logging wlc-journal command for enabling WLC logs to syslog server
- SNMP:
- Optimization of WLC tables
Fixed:
- Duplication of wireless client sessions in the WEB
- Incorrect status when ending a session in the WEB
- Error "RRM:rrm request for start optimization, location '<location name>' failed, reason: 'failure from airtune api'" when starting AirTune optimization for location
- Reason for the "RRM:Cannot backup domains info: 'malformed answer from airtune api'" log
- AP status change to the "Cfg failed" after deleting radio-2g-profile/radio-5g-profile
- AP status change to the "Failed" due to: "CoA timeout expired" when switching to the backup controller
- Service wlc_gre error termination
- Problem with obtaining an IP address via DHCP for clients using Broadcast check-box in the tunneling scheme
- Reason for the "IS_NE check failed: stat_map->entry_sz (170 != 8) !!! on WLC-3200" log
- Error when entering the path of external media for storing IPS rules
- Error "PLUGIN_AUTH_USER_PASS_VERIFY failed with status 1" due to the use of uppercase letters in the OpenVPN server configuration
- Traffic classification by match access-group and DSCP
- show mac address-table command output when WLC is operating in a client traffic tunneling scheme
- Allowed to specify the user name as a MAC address in the access profile
- IPsec tunneling with XAuth authorization
- Speed of SoftGRE tunnel establishment with LLDP enabled
- Error in the show wlc ap detailed command output when using 40 MHz radio channel width
- Error ESRinfo_wlc_service_activator_aps_MAX when requesting VAP
Version 1.30.2
Revisions:
- Monitoring and management:
- CLI:
- Added logging radius command to enable RADIUS server logs
- Added alarm enable journal command block for independent configuration of trap sending and alarm logging
- WEB:
- Configuration
- NAS ID configuration in radius-profile
- MAC authorization configuration in ssid-profile
- Configuration
- Syslog:
- Syslog messages filtering for RADIUS servver (match process-name radius-server)
- SNMP:
- eltWlcApVapTable (OID .1.3.6.1.4.1.35265.1.224.1.3.2.6) table in ELTEX-WLC-MIB, which contains information about enabled VAPs on AP
- OID eltWlcRadioUtilization (OID .1.3.6.1.4.1.35265.1.224.1.3.2.4.1.13) is added to ELTEX-WLC-MIB to get the value of the current radio channel utilization
- CLI:
Fixed:
- NAS IP replacement when proxying RADIUS accouting
- Monitoring of clients running on WOP-30LI AP
- Incorrect displaying of Uptime parameter on clients page in WEB
- Incorrect displaying of band on show wlc clients ap command output
- Ap-location field displaying when AP is in Upgrading FW status
- Work of show wlc ap command output
- Uploading files via FTP if special characters are present in name
Version 1.30.1
Revisions:
- Active-Standby clustering functionality for WLC
- Integration with ECCM
- Monitoring and management:
- Syslog:
- Syslog messages filtering for WLC services (match process-name wlc)
- SNMP:
- eltWlcApSaTable (OID .1.3.6.1.4.1.35265.1.224.1.3.2.5) table in ELTEX-WLC-MIB, which consists information about unregistered AP
- eltWlcClientInfoTable (OID .1.3.6.1.4.1.35265.1.224.1.3.3.4) table in ELTEX-WLC-MIB, which contains information about clients connected to the WLC
- WEB:
- WEB server transfer to VRF
- Syslog:
- Security:
- Download encrypted keys
- WLC:
- Monitoring:
- Displaying the frequency range in thе show wlc clients command output
- Configuration:
- session password auth-password command to use RADIUS key as a password for mach-auth for portal authorization
- session password mac <MAC FORMAT> command to use client MAC address in the selected format as a password for mac-auth for portal authorization
- Time zone setting on AP. Time zone is taken from the device configuration if it is not set in the location
- proxy-https command to enable encrypted exchange between client and AP for portal authorization
- crypto cert and crypto private-key-password commands to select a certificate in portal authorization and to specify the certificate password
- radar command block in ap-profile to configure positioning by MQTT protocol
- Monitoring: