Interfaces
- 20 х 1000BASE-X/100BASE-FX (SFP)
- 4 х 10/100/1000BASE-T/ 1000BASE-X/100BASE-FX Combo
- 4 х 10GBASE-R (SFP+)/1000BASE-X (SFP)
- 1 х 10/100/1000BASE-T (OOB)
- Console port RS-232/RJ-45
Performance
- Bandwidth - 128 Gbps
-
Throughput for 64 bytes1 - 95 MPPS
-
Buffer memory - 1.5 MB
-
RAM (DDR3) - 512 MB
-
ROM (RAW NAND) - 512 MB
-
MAC table - 16384
- ARP table2 - 4023
- VLAN table - 4094
- L2 Multicast groups - 4091
- SQinQ rules - 3006 (ingress/egress)
- ACL rules - 3006
- L3 IPv4 Unicast1 - 12864
- L3 IPv6 Unicast1 - 3222
- L3 IPv4 Multicast (IGMP Proxy, PIM)1 - 3876
- L3 IPv6 Multicast (IGMP Proxy, PIM)1 - 1006
- VRRP switches - 255
- Maximum size of ECMP groups - 8
- VRF - 16 (including default VRF)
- L3 interfaces - 2048
- Link Aggregation Groups (LAG) - 48, up to 8 ports per LAG
- Quality of Service (QoS) - 8 egress queues per port
- Jumbo frames - 10240 bytes
- Stacking - 8 devices
Interfaces functions
- Head-of-line blocking (HOL) protection
- Back Pressure
- Auto MDI/MDIX
- Jumbo Frames
- Flow control (IEEE 802.3X)
- Port Mirroring (SPAN, RSPAN)
- Stacking
MAC table functions
- Independent learning mode per VLAN
- MAC Multicast Support
- Configurable aging time of MAC addresses
- Static MAC Entries
- MAC Flapping logging
VLAN functions
- Voice VLAN
- 802.1Q
- Q-in-Q
- Selective Q-in-Q
- GVRP
L2 Multicast functions
- Multicast profiles
- Static Multicast groups
- IGMP Snooping v1,2,3
- Port/host based IGMP Snooping Fast Leave
- Pim-Snooping
- IGMP proxy-report
- IGMP authorization via RADIUS
- MLD Snooping v1,2
- IGMP Querier
- MVR
L2 functions
- STP (Spanning Tree Protocol, IEEE 802.1d)
- RSTP (Rapid Spanning Tree Protocol, IEEE 802.1w)
- MSTP (Multiple Spanning Tree Protocol, IEEE 802.1s)
- STP Multiprocess
- PVSTP+
- RPVSTP+
- Spanning Tree Fast Link option
- STP Root Guard
- STP Loop Guard
- BPDU Filtering
- STP BPDU Guard
- VLAN-based Loopback Detection (LBD)
- ERPS (G.8032v2)
- Flex-link
- Private VLAN, Private VLAN Trunk
- Layer 2 Protocol Tunneling (L2PT)
L3 functions
- Static IP routes
- Dynamic routing protocols RIPv2, OSPFv2, OSPFv3, IS-IS (IPv4 Unicast), BGP² (IPv4 Unicast, IPv4 Multicast)
- BFD (for BGP)
-
Address Resolution Protocol (ARP)
- Proxy ARP
- Policy-Based Routing (IPv4)
-
VRRP
-
PIM SM, PIM DM, IGMP Proxy, MSDP
- IP Unnumbered
-
ECMP Load Balancing
-
IP Unnumbered
- GRE
- VRF Lite
Link Aggregation functions
- Static LAG
- Dynamic LAG (LACP)
- LAG Balancing Algorithm
- Multi-Switch Link Aggregation Group (MLAG)
IPv6 functions
Service functions
- Virtual Cable Testing (VCT)
- Optical transceiver diagnostic
- Green Ethernet
Security functions
- Protection against unauthorized DHCP servers (DHCP Snooping)
- DHCP Snooping
- DHCP Option 82
- IP Source Guard
- Dynamic ARP Inspection
- First Hop Security
- sFlow
- MAC-based authentication, Port Security, Static MAC entries
- Port-based authentication IEEE 802.1x
- Guest VLAN1
- DoS attack prevention
- Traffic segmentation
- DHCP clients filtering
- BPDU attacks prevention
- NetBIOS/NetBEUI filtering
- PPPoE Intermediate Agent
Quality of Service (QoS)
- QoS statistics
- Shaping, Policing
- IEEE 802.1p Class of Service (CoS)
- Storm Control for different types of traffic (broadcast, multicast, unknown unicast)
- Bandwidth management
- Scheduling algorithms: Strict Priority/Weighted Round Robin (WRR)
- Three marking colors
- ACL-based CoS/DSCP mark assignment
- ACL-based VLAN assignment
- Setting the IEEE 802.1p priority for management VLAN
- DSCP to CoS/CoS to DSCP remarking
- 802.1p, DSCP mark assignment for IGMP
ОАМ
- IEEE 802.3ah Ethernet OAM
- IEEE802.1ag Connectivity Fault Management (CFM)¹
- IEEE802.3ah Unidirectional Link Detection (UDLD)
ACL (Access Control Lists)
- L2-L3-L4 ACL
- Time-Based ACL
- IPv6 ACL
- ACL based on:
- Physical port number
- IEEE 802.1p
- VLAN ID
- EtherType
- DSCP
- Protocol type
- TCP/UDP port numer
- User Defined Bytes
Management functions
-
Download and upload of configuration file via TFTP/SCP/SFTP
-
Redirecting the output of CLI commands to an arbitrary file on ROM
-
SNMP
-
Command line interface (CLI)
-
Web interface
-
Syslog
-
SNTP (Simple Network Time Protocol)
- NTP (Network Time Protocol)
-
Traceroute
-
LLDP (802.1ab) + LLDP MED
- Processing traffic management with two 802.1Q headers
- Authorization of entered commands using TACACS+ server
-
Access control - privilege levels
-
Management interface blocking
-
Local authentication
-
IP addresses filtering for SNMP
-
RADIUS and TACACS+ (Terminal Access Controller Access Control System) clients
- Change of Authorization (CoA)
- SSH server, Telnet server
- SSH client, Telnet client
- Remote start of commands via SSH
- SSL
-
Macrocommands
-
CLI commands logging
-
System log
-
DHCP autoprovision
-
DHCP Relay (Option 82)
-
DHCP Option 12
-
DHCPv6 Relay, DHCPv6 LDRA (Option 18, 37)
- DHCP server
-
PPPoE Circuit ID tag
-
Debugging commands
-
Rate limit of traffic to CPU
-
Password encryption
-
Password recovery
-
Ping (IPv4/IPv6 support)
- DNS server (Resolver)
Monitoring functions
-
Statistics on interfaces
-
RMON/SMON
- IP SLA
-
CPU utilization monitoring per task and per traffictype
-
RAM utilization monitoring
-
Temperature monitoring
-
TCAM utilization monitoring
MIB/IETF
-
RFC 1065, 1066, 1155, 1156, 2578 MIB Structure
-
RFC 1212 Concise MIB Definitions
-
RFC 1213 MIB II
-
RFC 1215 MIB Traps Convention
-
RFC 1493, 4188 Bridge MIB
-
RFC 1157, 2571-2576 SNMP MIB
-
RFC 1901-1908, 3418, 3636, 1442, 2578 SNMPv2 MIB
-
RFC 1271,1757, 2819 RMON MIB
-
RFC 2465 IPv6 MIB
-
RFC 2466 ICMPv6 MIB
-
RFC 2737 Entity MIB
-
RFC 4293 IPv6 SNMP Mgmt Interface MIB
-
Private MIB
-
RFC 3289 DIFFSERV MIB
-
RFC 2021 RMONv2 MIB
-
RFC 1398, 1643, 1650, 2358, 2665, 3635 Ether-like MIB
-
RFC 2668 802.3 MAU MIB
-
RFC 2674, 4363 802.1p MIB
-
RFC 2233, 2863 IF MIB
-
RFC 2618 RADIUS Authentication Client MIB
-
RFC 4022 MIB for TCP
-
RFC 4113 MIB for UDP
-
RFC 2620 RADIUS Accounting Client MIB
-
RFC 2925 Ping & Traceroute MIB
-
RFC 768 UDP
-
RFC 791 IP
-
RFC 792 ICMPv4
-
RFC 2463, 4443 ICMPv6
-
RFC 4884 Extended ICMP for Multi-Part messages support
-
RFC 793 TCP
-
RFC 2474, 3260 DS field in the IPv4 and IPv6 headers
-
RFC 1321, 2284, 2865, 3580, 3748 Extensible Authentication Protocol (EAP)
-
RFC 2571, RFC2572, RFC2573, RFC2574 SNMP
-
RFC 826 ARP
- RFC 854 Telnet
- IEC 61850
Physical parameters
-
Power supply:
- 100–240 V AC, 50–60 Hz;
- Power options: one DC or AC power source two hot-swappable DC or AC power sources
- Input current:
- 0.45–0.19 A for AC
- 1.25–0.62 A for DC
- Maximum power consumption (including PoE): 45 W
- Heat dissipation - 45 W
- Hardware support for Dying Gasp - no
-
Operating temperature - from -10 to +45°С
-
Storage temperature - from -50 to +70°С
-
Operating humidity - no more than 80%
-
Cooling - Front-to-Back, 4 fans
-
Form factor - 19", 1U
-
Dimensions (W x H x D) - 430 x 44 x 275
-
Weight - 3.50 kg
1 Values are given for 1-way transmission
2 For each host in the ARP table, an entry is create
Show all
Hide
Operational lifetime of the ELTEX equipment
Mass production is over
4
Regardless of the operational lifetime stage, Eltex provides a 12 months warranty on all its telecommunication equipment.
During the warranty period the manufacturer ensures technical support and free-of-charge repair at the Enterprise which is situated in Novosibirsk.
As part of the warranty service, technical support is provided on the first-in first-out principle.
The priority support packages of 8/5 and 27/7 types are subjects to additional charges.