Wi-fi Outdoor Access Point WOP-12ac

Currently Serviced

Mass production is over

Key benefits

Dual band Wi-Fi 802.11ac
Power supply: PoE+ (IEEE 802.3at)
Cluster operations without dedicated serve (up to 64 devices)
Seamless roaming
Up-to-date authentication and encryption means

Outdoor access point

WOP-12ac provides high-performance and safe wireless connection that combines numerous features and services absolutely necessary for convenient network access in crowded areas. WОP-12ac is a proper solution for organization of wireless networks in various climatic conditions—in a wide range of operating temperatures and high humidity (in parks, at factories, stadiums, etc.)—and provides an optimal platform for organization of communication networks in suburban settlements and remote locations.

Solution Scalability

The WОP-12ac wireless access point is a new flexible solution that allows you to change the network coverage in order to increase the quantity of serviced mobile devices. Due to high-performance hardware platform, scalability features and understandable interface, it is possible to set up wireless IT infrastructure simply and fast.

Wireless Connection

The WOP-12ac provides 1300 Mbps (5GHz) + 450 Mbps (2.4 GHz) data rate as it supports IEEE 802.11n/ac standards. Furthermore, the WOP-12ac supports MIMO technology and has omnidirectional antennas that makes it a universal solution for public networks organization.

Security

The WOP-12ac provides secure connection due to the support of up-to-date authentication technologies. Particularly, it uses a dynamic key that is unique for each mobile device that interacts with WOP-12ac.

Performance

To ensure the steadiness of operation, the device is equipped with high-performance chipsets providing high data processing rates.

Power Supply

The PoE+ technology makes the installation possible practically at any place regardless of the power supply location, thus allowing for cost economy on power cables and making the installation easier and faster.

Read manuals online here

Show all

Interfaces

2 x Ethernet 10/100/1000Base-T (RJ-45)
1 x 100/1000Base-X (SFP) optionally
6 x N – type (female) for external antennas (Omni, sector, rod, etc.)
Console (RJ-45)

WLAN Capabilities

IEEE 802.11a/b/g/n/ac standard support
Data aggregation, including A-MPDU (Tx/Rx) and А-MSDU (Rx)
WMM based packet priorities and planning
External access point detection
Dynamic frequency selection (DFS)
Hidden SSID support
APSD support
WDS support
32 virtual access points

Network features

Automatic speed negotiation, duplex mode negotiation, and MDI/MDI-X switch-over
VLAN support
802.1X authentication support
DHCP client
LLDP support
ACL support
IPv6 support

Cluster mode operation

Cluster creation with the capacity of up to 64 access points
Load balancing for multiple access points
Automatic synchronization of cluster access point configurations
Single Management IP—a single address for cluster access point management
Automatic frequency channel allocation for multiple access points
Authentication via RADIUS server

QoS functions

Profile based packet priorities and planning
Bandwidth restriction for each SSID
Modification of WMM parameters for each radio frequency interface

Security

Centralized authorization via RADIUS server (WPA Enterprise)
WPA/WPA2 encryption of data
Captive portal support
E-mail notifications of system events

Wi-Fi Wireless Interface Specifications

Frequency range: 2412–2472 MHz, 4900–5850 MHz
CCK, BPSK, QPSK, 16QAM, 64QAM, 256QAM modulations
3х3 MIMO support

Active channels

802.11b/g/n: 1-13 (2412-2472 MHz)¹
802.11 a/n/ac:
- 36-64 (5180 - 5320 MHz)
- 100-144 (5500 - 5720 MHz)
- 149-165 (5745 - 5825 MHz)¹

Data transfer rate²

802.11n: 450 Mbps
802.11ac: 1300 Mbps

Receiver sensitivity

2.4 GHz: up to -98 dBm
5 GHz: up to -94 dBm

Maximum power of the transmitter

2.4 GHz: up to 19 dBm¹
5 GHz: up to 19 dBm¹

Physical specifications

Power consumption below 20W
128 MB NAND Flash
256 MB RAM DDR3
Power supply: PoE+ 48V/54V (IEEE 802.3at-2009)
48V DC
Operating temperature from -40С to +65С
Dimensions (WхHхD): 246х97х216 mm

Configuration

Software updates and configuration through DHCP-autoprovisioning
Remote control via Telnet, SSH
Web interface
SNMP

¹The number of channels and the value of the maximum output power will vary according to the rules of radio frequency regulation in your country.
²The maximum wireless data rate is defined according to IEEE 802.11n/ac standard. The real bandwidth can be different. Conditions of the network, environment, the amount of traffic, building materials and constructions and network service data can decrease the real bandwidth. The environment can influence on the network coverage range.

Show all

Omni LYNwave antenna (2.4 GHz)
Operating frequency range, MHz	2400 - 2500
Amplification ratio, dBi	5+1
VSWR	2.0 : 1
Max. power, W	1
Input resistance, Ohm	50
Polarization	Vertical
Weight, g	64.4
Dimensions, mm	Ø20 x 187
Connector	type-N Male
Operating temperature, °С	from -40°C to +70°C
Radiation angle on horizontal plane	360°
Radiation angle on vertical plane	30°

Omny LYNwave antenna (5 GHz)
Operating frequency range, MHz	5150 - 5825
Amplification ratio, dBi	5.5±1
VSWR	2.0 : 1
Max. power, W	1
Input resistance, Ohm	50
Polarization	Vertical
Weight, g	64.4
Dimensions, mm	Ø20 x 187
Connector	type-N Male
Operating temperature, °С	from -40°C to +70°C
Radiation angle on horizontal plane	360°
Radiation angle on vertical plane	25°

RFE 50-65/90/16 MIMO antenna
Operating frequency range, MHz	5100 - 6500
Amplification ratio, dBi	16
VSWR	no more than 1.5
Max. power, W	50
Input resistance, Ohm	50
Polarization	Linear, Vertical and Horizontal
Antenna weight, kg	1.2
Antenna dimensions, mm	250х250х30
Attachment weight, kg	0.1
Attachment dimensions, mm	100х120х40
Attachment mast diameter, mm	25-53
Connector	2 x SMA Female
Operating temperature, °С	from -40°C to +60°C
Rear radiation level	-40 dB
Cross-polarization level	-23 dB
Isolation between ports	-30 dB
Radiation angle on horizontal plane	90°
Radiation angle on vertical plane	8°

Jumper for antenna, 1.5/3 mm, (SFF50-3)-SMA(J)-SMA(J)
Conductor material	copper
Isolation material	RG142
Termination by connector from the both sides	SMA (Male)
Available length	1.5 and 3 mm
Central conductor diameter	0.94 mm
Application	Connector for sectoral antennas connection to Wi-Fi access points
Form factor	Outdoor for connection to Outdoor access points

Descriptions

Data sheet

Software

WOP-12ac-1.22.4.3

WOP-12ac-rev.B-1.22.4.3

WOP-12ac-rev.C-1.22.4.3

WOP-12ac-ER-1.22.4.3

Documentations

User manual

Quick guide

WEP-12ac, WOP-12ac Operation Manual, Device control via WEB-configurator, Firmware version 1.6.4

Downloads

Operational lifetime of the ELTEX equipment

Regardless of the operational lifetime stage, Eltex provides a 12 months warranty on all its telecommunication equipment.
During the warranty period the manufacturer ensures technical support and free-of-charge repair at the Enterprise which is situated in Novosibirsk.
As part of the warranty service, technical support is provided on the first-in first-out principle.
The priority support packages of 8/5 and 27/7 types are subjects to additional charges.

News