Wireless access point WB-15-W2
Mass production
Key benefits
1 It is recommended that M2M termo nano-SIM cards be used in adverse climatic conditions.
- Support for 2G/3G/4G-modem and channel redundancy
- Wi-Fi 2.4 GHz 802.11b/g/n with support for MIMO 2x2
- Wi-Fi traffic monitoring mode in 2.4 GHz
- Support for GPS and GLONASS
- Power supply via Passive PoE 24 V and DC 9-36 V
WB-15-W2 is an all-weather Wi-Fi access point with support for LTE and channel redundancy dedicated to connect network equipment to the Internet or departmental/corporate networks.
The device allows to create GRE tunnels through cellular network, supports router mode, monitoring for quality of connection with a base station and traffic shaping.
WB-15-W2 is enclosed in case with IP-54 protection level, that allows you to use the device in adverse climatic conditions.
Quick configuration
The device allows to create GRE tunnels through cellular network, supports router mode, monitoring for quality of connection with a base station and traffic shaping.
WB-15-W2 is enclosed in case with IP-54 protection level, that allows you to use the device in adverse climatic conditions.
Quick configuration
Due to the settings for large service providers stored in memory WB-15-W2 automatically detects the profile of the modem.
Connection capabilities
There is an opportunity to set up to 2 nano-SIM cards with support for 2G/3G/4G1 to the tray located on the front panel of the device. Ethernet 10/100Base-T connector and Wi-Fi 2.4 GHz 802.11b/g/n provide client with access to a local network.
Only operation via external 2G/3G/4G and GPS antennas is provided.
Performance
High-performance processors are used to ensure stable and uninterrupted operation, providing high rate of data processing.
HotSpot creating
WB-15-W provides operation in «Access point» mode that allows to organize mobile HotSpot in public places with portal user authentication (Captive Portal).
The device is capable to provide connection to SoftWLC service platform in OTT mode through third-party carriers networks. It ensures fast and flexible installing without additional actions.
Wi-Fi traffic monitoring mode
WB-15-W2 allows to capture radio traffic in the 2.4 GHz band regardless of the main Wi-Fi chip. The captured radio traffic can be transmitted in TZSP and HTTP formats to the server for further processing (for example, for MAC collection systems).
Power supply
Connection capabilities
There is an opportunity to set up to 2 nano-SIM cards with support for 2G/3G/4G1 to the tray located on the front panel of the device. Ethernet 10/100Base-T connector and Wi-Fi 2.4 GHz 802.11b/g/n provide client with access to a local network.
Only operation via external 2G/3G/4G and GPS antennas is provided.
Performance
High-performance processors are used to ensure stable and uninterrupted operation, providing high rate of data processing.
HotSpot creating
WB-15-W provides operation in «Access point» mode that allows to organize mobile HotSpot in public places with portal user authentication (Captive Portal).
The device is capable to provide connection to SoftWLC service platform in OTT mode through third-party carriers networks. It ensures fast and flexible installing without additional actions.
Wi-Fi traffic monitoring mode
WB-15-W2 allows to capture radio traffic in the 2.4 GHz band regardless of the main Wi-Fi chip. The captured radio traffic can be transmitted in TZSP and HTTP formats to the server for further processing (for example, for MAC collection systems).
Power supply
Power to the device might be supplied through clamps (in a car) or through Passive PoE technology
1 It is recommended that M2M termo nano-SIM cards be used in adverse climatic conditions.
Show all
Specifications
Documents and files
Warranty
Interfaces
- 1 port of 10/100Base-T (Ethernet)
- 1 interface of 2G/3G/4G with channel redundancy support
- 2 SMA-type (female) connectors for 2G/3G/4G antennas (Omni, sectoral, panel, etc.)
- 1 SMA-type (female) connectors for external GPS antenna
- Wi-Fi 2.4 GHz IEEE 802.11b/g/n
- Wi-Fi 2.4 GHz (packet analyzer)
- Large providers profiles detection
- Support for channel redundancy (2 nano-SIM cards)
- Network mode selection
- Support for IEEE 802.11b/g/n
- Data aggregation, including A-MPDU (Tx/Rx) and A-MSDU (Rx)
- WMM-based priority and planning
- Support for hidden SSID
- Subscriber isolation within one VAP
- 4 virtual access points
- Channel autoselection
- Radio scan
- Wi-Fi traffic monitoring mode
- Spectrum analyzer
- Automatic speed negotiation, duplex mode negotiation and MDI/MDI-X switch-over
- Operation in router mode
- Static routing
- DHCP server
- Support for IPsec
- Support for PPP
- Support for GRE over IPsec
- Transmission of subscriber traffic out of tunnels
- Support for ACL
- Support for NTP
- Port forwarding
- Support for Syslog
- Packet priorities and planning based on profiles
- Bandwidth restriction for each VAP
- Bandwidth restriction for each client
- Client restriction for each VAP
- Modification of WMM parameters
Frequency ranges2
- 4G LTE FDD: B1, B3, B5, B7, B8, B20
- 4G LTE TDD: B40
- 3G UMTS: B1, B8
- 2G GSM: 850M, 900M, 1800M, 1900M
- 4G LTE FDD (Cat 4): 150 Mbps (DL) / 50 Mbps (UL)
- 4G LTE TDD (Cat 4): 130 Mbps (DL) / 35 Mbps (UL)
- 3G DC-HSPA+: 42 Mbps (DL) / 5,76 Mbps (UL)
- 2G EDGE: 384 kbps (DL) / 384 kbps (UL)
- 4G LTE: up to 23 dBm
- 3G UMTS: up to 23 dBm
- 2G GSM: up to 33 dBm
- Frequency range: 2402-2482 MHZ
- CCK, BPSK, QPSK, 16QAM, 64QAM modulations
- Internal omni-directional antenna
- Support for MIMO 2x2
- Bandwidth: 20, 40 MHZ
- 802.11b/g/n: 1-13 (2402–2482 MHz)
- 802.11b: up to 11 Mbps
- 802.11g: up to 54 Mbps
- 802.11n: up to 300 Mbps
- 2.4 GHz: up to -90 dBm
- 2.4GHz: up to 18 dBm
- Centralized authorization via RADIUS server (WPA/WPA2 Enterprise)
- WPA/WPA2 encryption
- Support for Captive Portal
- Remote management via Telnet, SSH
- Web interface
- CLI
- NETCONF
- Maximum power consumption 8 W
- 32 MB Flash
- 128 MB RAM
- Power supply:
- Passive PoE 24 V
- DC 9-36 V
- Operating temperature: from -45°С to +60°С
- IP54 protection level
- Dimensions (WxHxD): 88x232.5x47 mm
- Pole mounted
1 The number of channels and the value of the maximum output power will vary according to the rules of radio frequency regulation in
your country.
2 The maximum wireless data rate is defined according to IEEE 802.11n/ac standard. The real bandwidth can be different. Conditions of the
network, environment, the amount of traffic, building materials and constructions and network service data can decrease the real bandwidth. The environment can influence on the network coverage range.
Show all
Descriptions
Software
Documentations
Operational lifetime of the ELTEX equipment
In development
1
Pre-production
2
Mass production
3
Mass production is over
4
Sold out
5
Support is over
6
During the warranty period the manufacturer ensures technical support and free-of-charge repair at the Enterprise which is situated in Novosibirsk.
As part of the warranty service, technical support is provided on the first-in first-out principle.
The priority support packages of 8/5 and 27/7 types are subjects to additional charges.
News