Ru En
Designer and manufacturer of communication equipment
Russia (GMT +7)

Wireless access point WEP-2ac Smart

Mass production is over
Key benefits
  • Smart antennas technology support
  • Dual band access point with 802.11ac support
  • Power supply: PoE+ (IEEE 802.3at)
  • Operation in cluster without a dedicated server (up to 64 devices)
  • Seamless roaming
  • Up-to-date authentication and encryption means

Solution for enterprise
WEP-2ac Smart provides high-performance, secure, accessible and easy to use wireless network that combines numerous features and services required by corporate clients.
WEP-2ac Smart is a universal solution that may be used for organization of wireless networks in highly crowded areas and high traffic environments (offices, state institutions, conference halls, laboratories, hotels, etc.)

Wireless connection
With support of IEEE 802.11n/ac standards WEP-2ac Smart provides 867 Mbps (5GHz) + 300 Mbps (2.4 GHz) data rates..
The Smart antenna technology used at 5 GHz is based on more than 700 optimized antenna patterns that switch dynamically while access point operation. WEP-2ac Smart analyzes customer and noise source location and uses the best antenna pattern for every moment of time.  

WEP-2ac Smart provides personal data protection and corporate environment security due to the support of up-to-date authentication technologies. Particularly, it uses a dynamic key that is unique for each active client.

High-performance processors are used in the devices in order to provide reliability and high data processing  rates.

Power supply
The PoE+ technology makes the installation possible practically at any place regardless of the power supply location, thus allowing for cost economy on power cables and making the installation easier and faster.

Read manuals online here
Documents and files
  • 1 x Ethernet 10/100/1000BASE-T port (RJ-45) 
  • Console (RJ-45)
WLAN capabilities
  • IEEE 802.11a/b/g/n/ac standards support
  • Data aggregation, including A-MPDU (Tx/Rx) and А-MSDU (Rx)
  • WMM based packet priorities and planning
  • Dynamic frequency selection (DFS)
  • Hidden SSID support
  • 32 virtual access points
  • External access points detection
  • WGB support
  • APSD support
  • WDS support
Network features
  • Automatic speed negotiation, duplex mode negotiation and MDI/MDI-X switch-over
  • VLAN support
  • 802.1X authentication support
  • DHCP client
  • LLDP support
  • ACL support
  • SNMP support
  • IPv6 support
Cluster mode operation
  • Cluster creation with the capacity of up to 64 access points
  • Automatic synchronization of access points configurations in cluster
  • Automatic firmware update in cluster 
  • Single Management IP - single address for access points management in cluster 
  • Automatic frequency channel allocation for multiple access points
QoS functions
  • Profile based packet priorities and planning
  • Bandwidth limiting for each SSID
  • Modification of WMM parameters for each radio interface
  • Centralized authorization via RADIUS server (WPA Enterprise)
  • WPA/WPA2 encryption
  • Captive Portal support
  • E-mail notofications of system events
Wireless interface specifications 
  • Frequency range 2400 - 2480 MHz, 5150 - 5850 MHz
  • CCK, BPSK, QPSK, 16QAM, 64QAM, 256QAM modulations
  • Embedded omnidirectional antennas 2.4 GHz, embedded Smart  antennas on 5 GHz 
  • 2х2 MIMO, Smart Antenna 
Active channels
  • 802.11b/g/n: 1-13 (2412-2472 MHz)1         
  • 802.11 a/n/ac:                       
    • 36-64 (5180 - 5320 MHz)                         
    • 100-144 (5500 - 5720 MHz) 
    • 149-165 (5745 - 5825 MHz)1
Data transfer rate2
  • 802.11ac: 867Mbps
Receiver sensitivity
  • 2.4 GHz: up to -98 dBm 
  • 5 GHz: up to -94 dBm  
Maximum power of the transmitter
  • 2.4 GHz: up to 18 dBm1
  • 5 GHz: up to 21 dBm1
Physical specifications 
  • Power consumption below 13 W
  • 128 MB NAND Flash
  • 256 MB RAM DDR3
  • Power supply: PoE+ 48V/54V (IEEE 802.3at-2009)
  • Operating temperature from +5C to +40C
  • Software update and configuration via DHCP Autoprovisioning
  • Remote management via Telnet, SSH
  • Web interface
  • SNMP
  • EMS management system

1  The number of channels and the value of the maximum output power will vary according to the rules of radio frequency regulation in your country.
2 The maximum wireless data rate is defined according to IEEE 802.11n/ac standard.  The real bandwidth can be different. Conditions of the network,  environment, the amount of traffic, building materials and constructions and network service data can decrease the real bandwidth. The environment can influence on the network coverage range.

Operational lifetime of the ELTEX equipment
In development
Mass production
Mass production is over
Sold out
Support is over
Regardless of the operational lifetime stage, Eltex provides a 12 months warranty on all its telecommunication equipment.
During the warranty period the manufacturer ensures technical support and free-of-charge repair at the Enterprise which is situated in Novosibirsk.
As part of the warranty service, technical support is provided on the first-in first-out principle.
The priority support packages of 8/5 and 27/7 types are subjects to additional charges.