Wi-Fi Enterprise Access Point WEP-12ac
Mass production
Key benefits
- Dual band Wi-Fi 802.11ac
- Power supply: PoE+ (IEEE 802.3at)
- Cluster operations without dedicated server (up to 64 devices)
- Seamless roaming
- Up-to-date authentication and encryption means
Solution for enterprise
WEP-12ac provides high-performance, secure, accessible and easy to use wireless network that combines numerous features and services required by corporate clients.
WEP-12ac is a universal solution that may be used for organization of wireless networks in highly crowded areas and high traffic environments (offices, state institutions, conference halls, laboratories, hotels, etc.)
Wireless Connection
The WEP-12ac provides 1300 Mbps (5GHz) + 450 Mbps (2.4 GHz) data rate as it supports IEEE 802.11n/ac standards. Furthermore, the WEP-12ac supports MIMO technology and has omnidirectional antennas that makes it a universal solution for public networks organization.
Security
Security
The WEP-12ac provides personal data protection and corporate environment security due to the support of up-to-date authentication technologies. Particularly, it uses a dynamic key that is unique for each active client.
Performance
High-performance processors these devices serve to provide reliability and high data processing rates.
Power Supply
The PoE+ technology makes the installation possible practically at any place regardless of the power supply location, thus allowing for cost economy on power cables and making the installation easier and faster.
When sequential connection method (point-to-point) is used, device should be powered with AC power adapter connected to the electrical network or separate power line.
Show all
Specifications
Documents and files
Warranty
Interfaces
1 The number of channels and the value of the maximum output power will vary according to the rules of radio frequency regulation in your country.
2 The maximum wireless data rate is defined according to IEEE 802.11n/ac standard. The real bandwidth can be different. Conditions of the network, environment, the amount of traffic, building materials and constructions and network service data can decrease the real bandwidth. The environment can influence on the network coverage range.
- 2 x Ethernet 10/100/1000Base-T (RJ-45)
- Console (RJ-45)
- IEEE 802.11a/b/g/n/ac standards support
- Data aggregation, including A-MPDU (Tx/Rx) and А-MSDU (Rx)
- WMM-based packet priorities and planning
- Dynamic frequency selection (DFS)
- Hidden SSID support
- 32 virtual access points
- External access points detection
- APSD support
- WDS support
- Automatic speed negotiation, duplex mode negotiation, and MDI/MDI-X switch-over
- VLAN support
- 802.1X authentication support
- DHCP client
- IPv6 support
- LLDP support
- ACL support
- Cluster creation with the capacity of up to 64 access points
- Load balancing for multiple access points
- Automatic synchronization of access points configurations in cluster
- Single Management IP—single address for access points management in cluster
- Automatic frequency channel allocation for multiple access points
- Authentication via RADIUS server
- Profile-based packet priorities and planning
- Bandwidth restriction for each SSID
- Modification of WMM parameters for each radio frequency interface
- Centralized authorization via RADIUS server (WPA Enterprise)
- WPA/WPA2 encryption
- Captive Portal support
- E-mail notifications about system events
- Frequency range: 2400–2480 MHz, 5150 – 5850 MHz
- CCK, BPSK, QPSK, 16QAM, 64QAM, 256QAM modulations
- Embedded dual-band antennas
- 3х3 MIMO support
- 802.11b/g/n: 1-13 (2412-2472 MHz)1
- 802.11 a/n/ac:
- 36-64 (5180 - 5320 MHz)
- 100-144 (5500 - 5720 MHz)
- 149-165 (5745 - 5825 MHz)1
- 36-64 (5180 - 5320 MHz)
- 802.11n: 450 Mbps
- 802.11ac: 1300 Mbps
- 2.4 GHz: up to -98 dBm
- 5 GHz: up to -94 dBm
- 2.4 GHz: up to 19 dBm1
- 5 GHz: up to 19 dBm1
- Power consumption below 14W
- 128 MB NAND Flash
- 256 MB RAM DDR3
- Power supply:
- PoE+ 48V/54V (IEEE 802.3at-2009)
- 12 V DC
- Operating temperature from +5°C to 40°C
- Dimensions (WхHхD): 224х42х235 mm
- Software update and configuration via DHCP Autoprovisioning
- Remote control via Telnet, SSH
- Web interface
- SNMP
1 The number of channels and the value of the maximum output power will vary according to the rules of radio frequency regulation in your country.
2 The maximum wireless data rate is defined according to IEEE 802.11n/ac standard. The real bandwidth can be different. Conditions of the network, environment, the amount of traffic, building materials and constructions and network service data can decrease the real bandwidth. The environment can influence on the network coverage range.
Show all
Descriptions
Documentations
Operational lifetime of the ELTEX equipment
In development
1
Pre-production
2
Mass production
3
Mass production is over
4
Sold out
5
Support is over
6
During the warranty period the manufacturer ensures technical support and free-of-charge repair at the Enterprise which is situated in Novosibirsk.
As part of the warranty service, technical support is provided on the first-in first-out principle.
The priority support packages of 8/5 and 27/7 types are subjects to additional charges.
News